Samsung HP-S4273 Plasma Display User Manual

							English-71
1.The wall mount bracket is delivered separately. Please tighten the captive screw in the
direction of the arrow after assembling the bracket.
Install the Wall Mount Bracket after the screws are securely inserted into the wall.
How to assemble the Wall Mount Bracket
Please use only the parts and components provided for wall mount installation.
Wall Installation Instructions
Refer to the installation guide supplied with your wall bracket.
1.Contact a professional installation service to install the wall bracket.2.Samsung Electronics is not responsible for any damages to the product or harm to customers or others when the installation is done by the
customer.
3.This product is for installing on cement walls. The product may not stay in place when installed on plaster or wood.4.Connect all external devices prior to installing the wall bracket.5.The package contents and parts supplied for the wall mount are subject to change without prior notice.
Installation Notes
Parts (Wall attachment panel is sold separately. Check with your dealer.)
Screw : 4Plastic Hanger : 4
Left : 1 Right : 1 1
Wall Mount Bracket ASSY-HINGE Accessories
Captive Screws
Wall Mount Bracket
ASSY-HINGE
(RIGHT) Separate ASSY-HINGE
into Left and Right. ASSY-HINGE
(LEFT)
The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same)
1.Remove the screws from the back of the PDP.
Fixing the TV panel to the wall attachment panel bracket
2.Use the screw and assemble the plastic hanger. (Please refer to the
following picture.)
• Please ask the installers to install the wall mount bracket.
• Please be sure to check if the plastic hanger is completely secured 
on both the left and right side after hanging the SET on the wall 
mount bracket.
• Please avoid catching your fingers while installing and adjusting the
angle.
• Please tightly secure the wall mount bracket to the wall to avoid 
injury from a falling TV.
Continued...
BN68-00991K-01Eng  8/7/06  12:58 PM  Page 71 
						

							English-72
3.Tighten the screws of the plastic hanger (shown in picture 2) to the
back side of the PDP.4.Remove the Safety Pins. Fasten the 4 plastic latches assembled at
step (#) on the back side of the PDP using the guide holes of the
wall mount, push (!) and hook (@) down to secure the PDP on the
wall mount as illustrated. Secure the PDP by inserting the Safety
Pins.
PDP
Wall Bracket Wall
Note: Please secure the mounting bracket on the wall surface after setting its angle at 0°
1.Secure the SET to the wall mount bracket.
(Please refer to the following instructions.)
2.Set the angle by pulling the upper end of the SET attached to
bracket in the direction of the arrow. 
(Refer to the illustration on the right.)
3.The angle can be adjusted from 0° to 15° by ±2°.Hold onto the middle of the PDP to 
adjust the angle (not the sides of the 
PDP).
How to Adjust Mounting Angle
Note: To connect external devices such as a DVD or a Home Theater System to the PDP, please refer to following instructions:
1.Be sure to remove the safety pins underneath the PDP.
Note: If the safety pins are not removed, the angle cannot be adjusted. 
Any attempt to do so may cause damage to the PDP.
2.Hold onto the bottom of the PDP and pull forward fully as directed by the arrow as illustrated)
to adjust the angle. (0°~20° by 2°) Insert the Safety Pins to the front guide holes on both
sides as illustrated in figure @.
Note: Viewing the PDP after connecting the external devices Remove the Safety Pins 
to adjust the angle to 0°, and then secure the Safety Pins again.
• For safety, be sure to secure the PDP using the safety pins. If the safety pins are not used, 
the PDP may fall, causing serious injury.
Connecting External Devices to the PDP
BN68-00991K-01Eng  8/7/06  12:58 PM  Page 72 
						

							English-73
Model Name
Screen Size (Diagonal)
Power Supply
Power Consumption
PC Resolution
Antenna
Input
Video
Input
Audio
Input
Sound
Output
Audio
Output
Dimensions (WxDxH)
With stand
Weight
Body
With standHP-S4273
42 inch
AC 110-120V~ 60Hz
380 W
1024 x 768 @ 60 Hz
ANT 1 - AIR IN
ANT 2 - CABLE IN
75Ω unbalanced
AV1, AV2
S-VIDEO1, S-VIDEO2
COMPONENT1 - 480i/480p/720p/1080i
COMPONENT2 - 480i/480p/720p/1080i
PC
HDMI1 (DVI Compatible
HDMI2
AV1, AV2
S-VIDEO1, S-VIDEO2
COMPONENT1 - 480i/480p/720p/1080i
COMPONENT2 - 480i/480p/720p/1080i
PC
AUDIO (R/L)
OPTICAL (DIGITAL OUT)
COAXIAL (DIGITAL OUT)
41.5 X 13.4 X 30.5 inches
(1055 X 341 X 773.5 mm)
75 lbs (34 kg)
89.7 lbs (40.7 kg)HP-S5073
50 inch
AC 110-120V~ 60Hz
480 W
1360 x 768 @ 60 Hz
ANT 1 - AIR IN
ANT 2 - CABLE IN
75Ω unbalanced
AV1, AV2
S-VIDEO1, S-VIDEO2
COMPONENT1 - 480i/480p/720p/1080i
COMPONENT2 - 480i/480p/720p/1080i
PC
HDMI1 (DVI Compatible
HDMI2
AV1, AV2
S-VIDEO1, S-VIDEO2
COMPONENT1 - 480i/480p/720p/1080i
COMPONENT2 - 480i/480p/720p/1080i
PC
AUDIO (R/L)
OPTICAL (DIGITAL OUT)
COAXIAL (DIGITAL OUT)
48.3 X 13.4 X 34 inches
(1227.1 X 341 X 863.3 mm)
93.9 lbs (42.6 kg)
109.6 lbs (49.7 kg)
Specifications
➢ This device is a Class B digital apparatus.➢ Design and specifications are subject to change without prior notice.
How to assemble the Stand-Base
1.Using the 4 screws for securing the stand pegs and the monitor, firmly attach the monitor to the stand pegs. 
(The exterior of the set may be different than the picture.) 
Ye s
Stand Swivel (Left / Right)HP-S4273/HP-S5073
-20° ~ 20°
➢Two or more people should carry the TV. 
Never lay the TV on the floor because of possible damage to the screen. 
Always store the TV upright.
Warning
Firmly secure the stand to the TV before moving it, as the stand
may fall and could cause serious injury.
BN68-00991K-01Eng  8/7/06  12:58 PM  Page 73 
						

							English-74
Dimensions (HP-S4273)
TOP VIEWFRONT VIEW
SIDE VIEWREAR VIEW
JACK PANEL DETAIL 2 1/4"H x 18 3/4"W @ 5 3/4" UP FROM BOTTOM
BN68-00991K-01Eng  8/7/06  12:58 PM  Page 74 
						

							English-75
Dimensions (HP-S5073)
JACK PANEL DETAIL 2 1/4"H x 18 3/4"W @ 5 3/4" UP FROM BOTTOM TOP VIEW
FRONT VIEW
SIDE VIEWREAR VIEW
BN68-00991K-01Eng  8/7/06  12:58 PM  Page 75 
						

							BN68-00991K-01 Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
Country
CANADA
U.S.ACustomer Care Center 
1-800-SAMSUNG (7267864)
1-800-SAMSUNG (7267864)Web Site
www.samsung.com/ca
www.samsung.com
Address
Samsung Electronics Canada Inc., Customer Service
55 Standish Court Mississauga, Ontario L5R 4B2
Canada
Samsung Electronique Canada Inc., Service à la Clientèle
55 Standish Court Mississauga, Ontario L5R 4B2
Canada
Samsung Electronics America, Inc.
105 Challenger Road
Ridgefield Park, NJ 07660-0511
BN68-00991K-01Eng  8/7/06  12:58 PM  Page 76