Samsung HP-S4273 Plasma Display User Manual

Owner’s
Instructions
HP-S4273
HP-S5073
PLASMA DISPLAY
Register your product at www.samsung.com/global/register
BN68-00991K-01Eng  8/7/06  12:57 PM  Page 1 

English-2
Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide
screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, 
or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary
graphics and images on screen, such as the dark side-bars on nonexpanded standard format television video and 
programming, should...

English-3
Screen Image retention
Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes
as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image
retention, refer to page 26 of this manual to reduce the degree of brightness and contrast of the screen when 
displaying a still image.
Altitude
The PDP can only operate normally at heights under 6500ft.
Heat on the top of the PDP TV
The top side of...

English-4
Symbol Press Important Note One-Touch
Button
Contents
GENERAL INFORMATION
List of Features .................................................................................. 5
Accessories ........................................................................................ 5
Viewing the Control Panel.................................................................. 6
Viewing the Connection Panel ........................................................... 7
Remote Control...

English-5
List of Features

Adjustable picture settings that can be stored in the TV’s memory.

Automatic timer to turn the TV on and off.

Aspecial sleep timer.

V-
Chip function.

Excellent Digital Interface & Networking :
With a built-in HD digital tuner,  non-subscription HD broadcasts can be viewed with no Set-Top Box needed.

Remote Control
The supplied remote can be used to operate the TV as well as most DVD players, Set-top boxes, Cable Boxes and VCRs.

Excellent Picture Quality
- 
DNIe...

English-6
Viewing the Control Panel 
ŒSOURCE
Toggles between all the available input sources
(TV, AV1, AV2, S-Video1, S-Video2, Component1,
Component2, PC, HDMI1, or HDMI2). 
´MENU
Press to see an on-screen menu of your TV’s features.
ˇ+ VOL –Press to increase or decrease the volume.
In the on-screen menu, use the + VOL –buttons as
you would use the œ œ
and √ √
buttons on the remote
control.
¨CHPress to change channels.  
In the on-screen menu, use the CHbuttons as
you would use the … …
and† †
buttons on...

English-7
ŒPOWER IN
Connect the supplied power cord.
´HDMI IN 2
Connect to the HDMI jack of a device with 
HDMI output.
ˇHDMI 1/DVI IN
Connect to the HDMI jack of a device with HDMI output.
This input can also be used as a DVI connection with
separate analog audio inputs. An optional HDMI/DVI
cable will be necessary to make this connection.
When using an optional HDMI/DVI adapter, the DVI
analog audio inputs on your TV allow you to receive left
and right audio from your DVI device. (Not compatible
with...

English-8
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the TV. 
You can also use your remote control to operate your VCR, Cable box, DVD player, or Set-Top Box.
ŒPOWER
Turns the TV on and off.
´NUMERIC BUTTONS
Press to directly select a channel.
ˇ–
Press to select additional channels
(digital and analog) being broadcast by
the same station. For example, to
select channel “54-3”, press “54”, then
press “–
”...

English-9
1.Place the wires from the twin leads under the screws on a 300-75Ωadapter 
(not supplied). 
Use a screwdriver to tighten the screws.
2.Plug the adaptor into the ANT1 IN(AIR) or ANT2 IN(CABLE) terminal on the back 
of the TV.
Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like this, see “Antennas with 300 ΩFlat Twin Leads”
below.
If your antenna has one lead that looks like this, see “Antennas with 75 
ΩRound Leads”.
If you have two antennas, see “Separate VHF and...

English-10
After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled
channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)
2.Connect this cable to a two-way splitter.
Splitter Incoming
cable
3.Connect an Antenna cable between an
OUTPUT terminal on the splitter and the 
IN terminal on the cable box.
Splitter
Cable Box...