Samsung HP-S4273 Plasma Display User Manual

English-11
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on
pages 9-10). Skip step 1 if you have not yet connected to an antenna or a cable system. 
1.Unplug the cable or antenna
from the back of the TV.
2.Connect the cable or antenna
to the ANT IN terminal on the
back of the VCR.
3.Connect an Antenna Cable
between the ANT OUT
terminal on the VCR and the
ANT1 IN(AIR) or ANT2 IN
(CABLE) terminal on the...

English-12
Connecting a DVD Player/Set-Top Box via DVI
This connection can only be made if there is a DVI Output jack on the external device.
1.Connect a DVI to HDMI
Cable or DVI-HDMI Adapter
between the HDMI 1/DVI IN
jack on the TV and the 
DVI jack on the DVD player/
Set-Top Box.
2.Connect Audio  Cables
between the DVI IN 
[R-AUDIO-L] jack on the 
TV and the AUDIO OUT
jacks on the DVD player/
Set-Top Box.
DVD Player / Set-Top Box
TV Rear Panel
Audio Cable (Not supplied)
2
➢Each DVD player/Set-top box...

English-13
/ T
D
Connecting a DVD Player/Set-Top Box via HDMI
This connection can only be made if there is an HDMI Output jack on the external device.
1.
Connect an HDMI Cable
between the [HDMI1/DVI IN]
or [HDMI IN 2] on the TV and
the HDMI OUT on the DVD
player/Set-Top Box or
connect a DVI to HDMI Cable
or DVI-HDMI Adapter
between the [HDMI1/DVI IN]
jack on the TV and the DVI
jack on the DVD player/Set-
Top Box.
If connecting via HDMI/DVI,
you must also connect audio
cables. Connect Audio
Cables between...

English-14
Connecting an Amplifier/DVD Home Theater
1.Connect Audio  Cables
between the AUDIO OUT
[R-AUDIO-L] on the TV 
and AUDIO IN [R-AUDIO-L]
on the Amplifier/DVD Home
Theater.
When an audio amplifier is 
connected to the “AUDIO 
OUT [R-AUDIO-L]” 
terminals: Decrease the 
gain (volume) of the TV, 
and adjust the volume level 
with the Amplifier’s volume 
control.
Amplifier/DVD Home TheaterTV Rear Panel
Audio Cable (Not supplied)
➢Each Amplifier/DVD Home Theater has a different back panel...

English-15
Turning the TV On and Off
Press the POWERbutton on the remote control.
You can also use the POWERbutton on the TV.
➢It may take a while when your TV starts.
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically and subsequently:
1.Press the POWERbutton on the remote control.
The message “Menu language, Channels and Time will be set.” is displayed. 
Press the ENTERbutton, then “Select Home Mode when installing this TV at 
home.” menu is...

English-16
5.The TV will begin memorizing all of the available channels. 
After all the available channels are stored, the Auto program menu reappears. 
Press the ENTERbutton when channel memorization is complete.
“Clock Mode” menu is automatically displayed.
➢To stop the search before it has finished, press the ENTER button with Stop selected.
6.Press the ENTERbutton.
Press the … …
or † †
button to select “Manual” if you want to set the current time
manually, then press the ENTERbutton. “Set current...

English-17
1.Press the MENU button to display the menu.
Press the … …
or † †
button to select “Setup”, then press the ENTERbutton. 
2.Press the ENTERbutton to select “Plug & Play”.
For further details on setting up options, refer to the page 15~16. 
➢Plug & Play can only be accessed in the TV mode.
If you want to reset this feature...
Changing Channels
1.Press the CH orCHbutton to change channels. 
➢When you press theCH orCHbutton, the TV changes channels in sequence. 
You will see all the channels that...

English-18
Viewing the Menus
1.With the power on, press the MENU button.
The main menu appears on the screen. Its left side has five icons: 
Input, Picture, Sound, Channel, Setup.
2.Use the … …
or † †
button to select one of the five icons. 
Then press the ENTERbutton to access the icon’s sub-menu.
3.Press the EXIT button to exit.
➢It takes about one minute until the on-screen menu disappears.
Viewing the Display
1.Press the INFO button on the remote control.
The TV will display the channel, the type of...

English-19
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (air) and cable channels. 
After the available channels are memorized, use the CHorCHbutton to scan through the channels. 
This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: 
selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).
Selecting the Video Signal-source...

English-20
Setting Up the Remote to Operate Your VCR
1.Turn off your VCR.
2.Press the VCR button on your TV’s remote control.
3.Press the SETbutton on your TV’s remote control.
4.Using the number buttons on your remote control, enter three digits of the VCR code listed on
page 22 of this manual for your brand of VCR. Make sure you enter three digits of the code,
even if the first digit is a “0”. (If more than one code is listed, try the first one.)
5.Press the POWERbutton on the remote control. Your VCR...