Samsung HP-S4253, HP-S5053 Plasma Display Owners Instructions

11
Remote Control Buttons
ŒPOWER buttonTurns the TV on and off.
´Number buttons
ˇ
-buttonPress to select additional channels (digital and analog) being broadcast
by the same station. For example, to select channel “54-3”, press “54”,
then press “
-” and “3”.
¨ANTENNA buttonPress to select “Air” or “Cable”.
ˆCH MGR buttonUsed to displays Channel Lists on the screen.
ØVCR, DVD control buttonsControls VCR tape or DVD disc functions: Rewind, Stop, Play/Pause, 
and Fast Forward.
∏VOL (Volume) buttonsUse it to...

˛P.MODE buttonAdjust the TV picture by selecting one of the preset factory settings (or
select your personal, customized picture settings). (Refer to page 53)
◊S.MODE buttonSelect Sound effect. (Refer to page 67)
±MTS buttonPress to choose stereo, mono or Separate Audio Program 
(SAP broadcast).
≠SRS buttonActivates TruSurround. (Refer to page 68)
–AUTO PROG. buttonPress to display the memorized channels menu. (Refer to page 37)
—ADD/DEL buttonPress to add or erase channels in the TV’s memory. (Refer to...

13
Wall Installation Instructions
Refer to the installation guide supplied with your wall bracket.
1
Contact a professional installation service to install the wall bracket.
2
Samsung Electronics is not responsible for any damages to the product or harm to
customers when the installation is done by the customer.
3
This product is for installing on cement walls. The product may not stay in place when
installed on plaster or wood.
4
Connect all external devices prior to installing the wall bracket.
5
The...

14
1 
The wall mount bracket is delivered separately. Please tighten the captive screw in the
direction of the arrow after assembling the bracket.
Install the Wall Mount Bracket after the screws are securely inserted into the wall.
How to assemble the Wall Mount Bracket
1 
Remove the screws from the back of the PDP.
2 
Use the screw and assemble the plastic hanger. (Please refer to the following picture.)
Fixing the TV panel to the wall attachment panel bracket
The shape of the product may vary depending...

15
3
Tighten the screws of the plastic hanger
(shown in picture 2) to the back side of 
the PDP.
4
Remove the Safety Pins. Fasten the 4
plastic latches assembled at step (#) on
the back side of the PDP using the guide
holes of the wall mount, push (!) and 
hook (@) down to secure the PDP on 
the wall mount as illustrated. Secure the 
PDP by inserting the Safety Pins, not to 
fall from the wall mount.
PDP
Wall Bracket Wall
How to Adjust Mounting Angle
Note  Note : Please secure the mounting bracket on the...

16
Connecting External Devices to the PDP
Note  Note :  To connect external devices such as a DVD or a Home Theater System to the PDP, 
please refer to following instructions:
1. Be sure to remove the safety pins underneath 
the PDP.
Note  Note : If the safety pins are not removed, 
the angle cannot be adjusted. 
Any attempt to do so may cause 
damage to the PDP.
2. Hold onto the bottom of the PDP and pull
forward fully as directed by the arrow as
illustrated) to adjust the angle. (0°~20° by 2°)
Insert...

17
How to assemble the Stand-Base
➤ ➤Two or more people should carry the TV. Never lay the TV on the floor because of possible damage to the screen. 
Always store the TV upright.
1
Using the 4 screws for securing the stand pegs and the monitor, firmly attach the monitor
to the stand pegs. (The exterior of the set may be different than the picture.) 
Warning
Firmly secure the stand to
the TV before moving it, 
as the stand may fall and 
could cause serious injury.
BN68-00991B-01Eng(002~031)  2/17/06  1:56...

BN68-00991B-01Eng(002~031)  2/17/06  1:56 PM  Page 18 

PLASMA DISPLAY PANEL
Connections
Connecting VHF and UHF Antennas ..............................................20
Connecting Cable TV....................................................................21
Connecting a VCR........................................................................23
Connecting a Camcorder ..............................................................24
Connecting a DVD Player (480i, 480p) ..........................................25
Connecting a DTV Receiver (480p, 720p,...

Connecting VHF and UHF Antennas
20
Antennas with 75-ohm Round Leads
If your antenna looks like this: it has 75-ohm round leads.  
1
Plug the antenna lead into the ANT 2 IN (AIR) on the TV.
Use an antenna cable. (Sold Separately)
BN68-00991B-01Eng(002~031)  2/17/06  1:56 PM  Page 20