Samsung HL-S5679W Dlp Tv Owners Instructions

English - 71
Swapping the Sub (PIP) Picture and Main Picture
1
Press the MENU button.
Press the 
œor √button to select
“PIP”, then press the ENTER button.
2
Press the …or †button to select
“Swap”, then press the ENTER 
button.
The sub picture appears in the main
picture, and vice versa.
Select “Return” by pressing the 
…or † button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
NOTES
•PIP is only available in RF (TV) mode.
•The PIP swap function is only...

Picture Control
English - 72
Changing the Size of the Sub (PIP) Picture
1
Press the MENU button.
Press the 
œor √button to select
“PIP”, then press the ENTER button.
2
Press the …or †button to select
“Size”, then press the ENTER button.
Press the 
…or †button to select a
size you want, then press the ENTER
button.
Select “Return” by pressing the 
…or † button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
PIP
Enter
PIP
PIP
Swap
Size
Position
Air/Cable...

English - 73
Changing the Location of the Sub (PIP) Picture
1
Press the MENU button.
Press the 
œor √button to select
“PIP”, then press the ENTER button.
2
Press the …or †button to select
“Position”, then press the ENTER 
button.
Press the 
…or †button to select a
position you want, then press the
ENTER button.
Select “Return” by pressing the 
…or † button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
NOTE
•In Double (     ,     ) mode, you cannot set the...

Picture Control
English - 74
Selecting a Signal Source (Air or Cable) for PIP
If the PIP source is TV while PIP is On, you can select a different broadcasting source 
for the PIP picture from the main picture.
1
Press the MENU button.
Press the 
œor √button to select
“PIP”, then press the ENTER button.
2
Press the …or †button to select
“Air/Cable”, then press the ENTER
button.
3
Press the …or †button to select
“Air” or “Cable”, then press the
ENTER button.
Select “Return” by pressing the 
…or † button,...

English - 75
Changing the Channel of the Sub (PIP) Picture
After you set the signal source (antenna or cable) of the sub picture, it is easy to change channels.
1
Press the MENU button.
Press the 
œor √button to select
“PIP”, then press the ENTER button.
2
Press the …or †button to select
“Channel”, then press the ENTER 
button.
3
Press the …or †button to select a
channel you want, then press the
ENTER button.
Select “Return” by pressing the 
…or † button, then press the ENTER
button to return to the...

Picture Control
English - 76
Freezing the Picture
Press the STILL button to freeze a moving picture. (Normal sound will
still be heard.) 
To cancel this function, press the STILL button again or press any
button on the remote control.
NOTE
•In the PIP mode, the main and sub pictures are stilled at the same
time.
BP68-00587A-00Eng(060~079)  4/28/06  7:41 PM  Page 76 

English - 77
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically replaces 
the noisy picture background. If you wish to continue viewing the poor picture, you must set the 
“Blue Screen” mode to “Off”.
1
Press the MENU button. 
Press the 
œor √button to select
“Setup”, then press the ENTER 
button.
2
Press the …or †button to select
“Blue Screen”, then press the ENTER
button.
3
Press the …or †button to select
“Off” or “On”, then press the...

Picture Control
English - 78
Setting the Color Gamut
You can choose your favorite color gamut. Color gamut means a color matrix made up with the basic
colors of Red, Green and Blue.
1
Press the MENU button.  
Press the 
œor √button to select
“Picture”, then press  the ENTER 
button.
2
Press the …or †button to select
“Color Gamut”, then press the
ENTER button.
3
Press the …or †button to select
“Normal” or “Wide”, then press
the ENTER button.
Select “Return” by pressing the 
…or † button, then press the...

Sound Control
BP68-00587A-00Eng(060~079)  4/28/06  7:41 PM  Page 79 

Sound Control
English - 80
Sound Control
You can control and customize the sound levels and settings of the TV with the remote control.
Adjusting the Volume
Press the VOL+ or VOL– button to increase or decrease the volume.
Using the MUTE Button
At any time, you can temporarily
cut off the sound.
Press the MUTE button on the
remote control.
The message “Mute” is displayed
and the sound cuts off.
To turn mute off, press the 
MUTE button again or press either
the VOL+ or VOL– button.
Using Automatic Sound...