Samsung HL-S5679W Dlp Tv Owners Instructions

English - 111
Channel List Reorganization
Deletes and reorganizes the channel list provided by CableCARD.
This feature should be used if you change or upgrade your CableCARD service.
1
Press the MENU button. 
Press the 
œor √button to select
“Setup”, then press the ENTER 
button.
2
Press the …or †button to select
“CableCARDTMSetup”, then press the
ENTER button.
3
Press the …or †button to select
“Channel List Reorganization”, then
press the ENTER button.
Setup
Enter
CableCARDTMSetup
CableCARD™ Reset...

Special Features
English - 112
Using TV Guide On ScreenTM
Shows the on-screen information on the program, and sets the scheduled program options.
To activate TV Guide On ScreenTMfeature, follow the instructions below.
1
Press the MENU button.
Press the 
œor √button to select
“Listings”, then press the ENTER 
button.
2
Press the …or †button to select
“TV Guide On ScreenTM”, then press
the ENTER button.
Press the EXIT button to exit.
NOTES
•Refer to TV Guide On ScreenTMfor details about Timer Recording....

English - 113
Using TV Guide On ScreenTMSetup
1
If you want to set up the TV Guide On ScreenTMnow, select
“Set up TV Guide On Screen now“. For more information, refer
to INITIAL GUIDE SETUP in the TV Guide Manual.
2
If you want to set up TV Guide On ScreenTMlater and want the
reminder screen to be displayed each time you turn your TV
on, select “Remind me to set it up later”.
This option will return you to watching TV.
3
If you don’t want to set up TV Guide On ScreenTMnow and
also don’t want the reminder...

SAMSUNG
BP68-00587A-00Eng(114~129)  4/28/06  7:38 PM  Page 114 

Using the D-Net
BP68-00587A-00Eng(114~129)  4/28/06  7:38 PM  Page 115 

Using the D-Net
English - 116
How to connect compatible IEEE1394 Devices
Connecting compatible IEEE1394 devices is simple using this TV equipped with IEEE1394. 
A secure digital interface is provided to other digital home entertainment units, such as a DTV, 
a Set-Top Box, an AVHDD, a digital VCR, a MPEG Camcorder. 
1
Connect the IEEE1394 
cable from the jack of the 
component with IEEE1394 
capability, such as a 
Set-Top Box or a Digital 
VCR to the IEEE1394 jack 
on the TV.
2
Press the D-Net button on...

English - 117
When Connecting D-Net (IEEE1394) Compatible devices
1
The last device in the chain may not be looped back to the TV as the TV may not be able to
work with the other devices.
To connect two or more D-Net (IEEE1394) Compatible devices, follow the diagram below.
A maximum 10 D-Net (IEEE1394)
Compatible devices can be 
connected.
Do not connect D-Net (IEEE1394)
Compatible devices in a way 
that creates a loop.
NOTE
•IEEE1394 cables longer than 14.76 feet (177.16 inches) should not be used...

Using the D-Net
English - 118
Connection Options
There are two different connection options for connecting D-Net (IEEE1394) compatible devices. 
Select the most suitable option according to your network of audio/video products.
The Direct Device-To-Device Option
D-Net (IEEE1394) permits the chaining of devices, unlike 
analog audio and video connections where each device
needs to be individually connected to the TV. This allows
you to connect your D-VHS to your 1394 Set-Top Box
only, then connect the...

English - 119
4-Pin and 6-Pin Connectors
Two different types of connectors are used for IEEE1394 terminals and cables, a 4-pin and 
a 6-pin.
The 4-pin connector sends digital audio, digital video and digital
control signals to and from devices. The TV has two available 4-pin
connection jacks, of which two are at the back.
The 6-pin connector also sends digital audio, video and control
signals, but in addition, sends low voltage electrical power. 
There are no 6 pin connectors on this TV.
It is not...

Using the D-Net
English - 120
Selecting a D-Net device
Prior to viewing an IEEE1394 device, it first needs to be selected in the D-Net Device List.
1
Connect the relevant D-Net (IEEE1394) Compatible device in the list.
(See “How to connect compatible IEEE1394 Devices” on page 116)
2
Press the D-Net button on the remote control.
3
Select a connected D-Net device by pressing
the 
…or †button.
4
To select a device, press the ENTER button. 
Then display the D-Net device control panel 
and operate the...