Samsung HL-S5086W DLP TV User Manual

English - 101
Viewing Closed Captions (On-Screen Text Messages)
The Digital Captions function operates on digital channels.
1
Press the MENU button.
Press the …or †button to
select “Setup”, then press
the ENTER button.
2
Press the …or †button to
select “Caption”, then press
the ENTER button.
3
Press the ENTER button to
select “Caption”.
Press the …or †button to
select “On”, then press the
ENTER button.
4
Press the …or †button to
select “Caption Mode”, then
press the ENTER button.
Press the …or †button...

Special Features
English - 102
6
Press the …or †button to select “Size”,
then press the ENTER button.
Press the …or †button to select one you
want, then press the ENTER button.
Set other listed options below using the
same method as above.
Press the EXIT button to exit.
NOTE
•The availability of captions depends on the program being broadcast.
Alternate method
Press the CAPTION button on the remote
control repeatedly to select “On” or “Off”.
Size
This option consists of “Default”, “Small”, “Standard”,...

PC Display
BP68-00586A-00Eng(084~103)  2/16/06  8:19 PM  Page 103 

PC Display
English - 104
Using Your TV as a Computer (PC) Display
How to Connect Your PC to the TV
This figure shows the Standard Connector-jack panel. The actual configuration on your TV may be 
different, depending on the model.
Connecting a PC (15p D-SUB) to the TV
1
Connect a PC cable between
the PC Output jack on the 
PC and the RGB input jack 
(PC IN) on the TV.
2
Connect a Audio cable
between the Audio jack on 
the PC and the Audio input 
jack (PC AUDIO IN) on 
the TV.
NOTE
•You cannot connect...

English - 105
Setting up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. But the actual screens on your
PC will probably be different, depending upon your particular version of Windows and your particular
video card. But even if your actual screens look different, the same, basic set-up information will apply
in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1. Right click the mouse on the Windows Desktop,...

PC Display
English - 106
NOTES
•The PC text quality is optimum in XGA mode (1024 x 768@60Hz).
•Both screen position and size will vary, depending on the type of PC monitor and its resolution. 
The table above shows all of the display modes that are supported:
*The interlace mode is not supported.
*The TV will operate abnormally if a non-standard video format is selected.
•When this TV is used as a PC display, 32-bit color is supported (over 16 million colors).
•Your PC display screen might appear...

English - 107
Adjusting the Picture Quality
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not
removed by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again.
After the noise has been reduced, re-adjust the picture so that it is aligned to the center of screen.
1Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the …or †button to
select “Setup”, then press
the ENTER button.
3
Press the …or †button to...

PC Display
English - 108
Changing the Picture Position
After connecting the TV to your PC, adjust the position of picture if it is not well-aligned.
1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the …or †button to
select “Setup”, then press
the ENTER button.
3
Press the …or †button to
select “PC”, then press the
ENTER button.
4
Press the …or †button to
select “Position”, then press
the ENTER button.
5
Adjust the position of picture
by pressing the …/†/œ/√
button.
Press the EXIT...

1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the …or †button to
select “Setup”, then press
the ENTER button.
3
Press the …or †button to
select “PC”, then press the
ENTER button.
4
Press the …or †button to
select “Auto Adjustment”,
then press the ENTER button.
The picture quality and
position are automatically
adjusted, and the picture
returns to original view  
a few seconds later.
Press the EXIT button to exit.
English - 109
Adjusting the Picture Quality and Position...

PC Display
English - 110
Changing the Picture Size (PC Mode)
You can select the picture size which best corresponds to your viewing requirements.
1
Press the SOURCE button to select “PC”.
2
Press the MENU button.
Press the …or †button to
select “Picture”, then press
the ENTER button.
Press the …or †button to
select “Size”, then press the
ENTER button.
3
Press the œor √button to
select the screen format you
want, then press the ENTER
button.
Press the EXIT button to exit.
NOTES
•“Wide TV”: Scales the...