Samsung HL-R7178W Dlp Tv Owners Instructions
Have a look at the manual Samsung HL-R7178W Dlp Tv Owners Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
English - 51 Fine Tuning Analog Channels Use fine tuning to manually adjust a particular channel for optimal reception. 1 Press the MENU button. Press the …or †button to select “Channel”, then press the ENTER button. 2 Press the …or †button to select “Fine Tune”, then press the ENTER button. 3 Press the œor √button to adjust the fine tuning. 4 To store the fine tuning setting in the TV’s memory, press the ENTER button. To reset the fine tuning setting, press the †button to select “Reset”, then press the ENTER button. 5 Press the EXIT button to exit. NOTE •Only analog TV channels can be fine tuned. Channel Antenna : Cable√Auto Program√Add/Delete√Channel List√Favorite Channels√Name√LNA : Off√▼ More MoveEnterReturn Input Picture Sound Channel Setup Listings Channel ▲ More Fine Tune√Signal Strength√ MoveEnterReturn Input Picture Sound Channel Setup Listings Fine Tune Cable 26 Not Fine Tuned 0 MoveEnterReturn Reset Fine Tune Cable 26 Not Fine Tuned 3 AdjustSaveReturn Reset Fine Tune Cable 26 Fine Tuned 3 AdjustSaveReturn Reset Analog BP68-00513A-00Eng(030~053) 6/3/05 3:07 PM Page 51
Channel Control English - 52 Checking the Digital-Signal Strength Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels. 1 Press the MENU button. Press the …or †button to select “Channel”, then press the ENTER button. 2 Press the …or †button to select “Signal Strength”, then press the ENTER button. If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal. Press the EXIT button to exit. Channel Antenna : Cable√Auto Program√Add/Delete√Channel List√Favorite Channels√Name√LNA : Off√▼ More MoveEnterReturn Input Picture Sound Channel Setup Listings Channel ▲ More Fine Tune√Signal Strength√ MoveEnterReturn Input Picture Sound Channel Setup Listings Signal Strength EnterReturn Input Picture Sound Channel Setup Listings OK Digital BP68-00513A-00Eng(030~053) 6/3/05 3:07 PM Page 52
Picture Control BP68-00513A-00Eng(030~053) 6/3/05 3:07 PM Page 53
Picture Control English - 54 Picture Control You can select the type of picture which best corresponds to your viewing requirements. Changing the Picture Standard 1 Press the MENU button. Press the …or †button to select “Picture”, then press the ENTER button. 2 Press the ENTER button again to select “Mode”. 3 Press the ENTER button. Press the …or †button to select the desired picture mode (Dynamic, Standard, Movie, Custom), then press the ENTER button. Press the EXIT button to exit. •Choose “Dynamic” for viewing the TV during the day or when there is a bright light in the room. •Choose “Standard” for the standard factory settings. •Choose “Movie” when viewing the movie. •Choose “Custom” if you want to adjust the settings according to personal preference (see “Customizing the Picture Settings”, page 55). Picture Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√ MoveEnterReturn Input Picture Sound Channel Setup Listings Mode Mode : Standard√Contrast 80 Brightness 50 Sharpness 50 Color 50 Tint G 50 R 50 Color Tone : Warm1 √Reset MoveEnterReturn Input Picture Sound Channel Setup Listings Mode Mode : Standard Contrast 80 Brightness 50 Sharpness 50 Color 50 Tint G 50 R 50 Color Tone : Warm1 Reset MoveEnterReturn Input Picture Sound Channel Setup Listings Dynamic Standard Movie Custom BP68-00513A-00Eng(054~075) 6/3/05 3:08 PM Page 54
1 Press the MENU button. Press the …or †button to select “Picture”, then press the ENTER button. 2 Press the ENTER button to select “Mode”. 3 Press the ENTER button. Press the …or †button to select the desired picture mode (Dynamic, Standard, Movie, Custom), then press the ENTER button. 4 Press the …or †button to select a particular option (Contrast, Brightness, Sharpness, Color, or Tint), then press the ENTER button. Press the œor √button to decrease or increase the value of a particular item. Continued... English - 55 Customizing the Picture Settings You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”, “Tint”, and “Color Tone” according to personal preference. You can select “Standard” which automatically recalls your personalized picture settings. Picture Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√ MoveEnterReturn Input Picture Sound Channel Setup Listings Mode Mode : Standard√Contrast 80 Brightness 50 Sharpness 50 Color 50 Tint G 50 R 50 Color Tone : Warm1 √Reset MoveEnterReturn Input Picture Sound Channel Setup Listings Mode Mode : Dynamic√Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G 50 R 50 Color Tone : Cool1 √Reset MoveEnterReturn Input Picture Sound Channel Setup Listings ▲Contrast▼90•You can also select these options (Contrast, Brightness, Sharpness, Color, or Tint) by pressing the …or †button. NOTES •“Tint” doesn’t operate in HDMI or 480p Component or higher modes. •The Tint cannot be adjusted while watching Digital TV. Mode Mode : Standard Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G 50 R 50 Color Tone : Cool1 Reset MoveEnterReturn Input Picture Sound Channel Setup Listings Dynamic Standard Movie Custom BP68-00513A-00Eng(054~075) 6/3/05 3:08 PM Page 55
Picture Control English - 56 5 Press the ENTER button to return to “Mode”. Press the …or †button to select “Color Tone”, then press the ENTER button. 6 Press the …or †button to select a particular item (Cool2, Cool1, Normal, Warm1, or Warm2), then press the ENTER button. Press the EXIT button to exit. NOTE •Color tone is not available in the “Movie” picture mode. 7To return the factory defaults, select “Reset” by pressing the …or †button. Press the ENTER button. NOTE •The reset function is set for each mode (Dynamic, Standard, Movie, or Custom).•The previously adjusted settings will be reset to the factory defaults. Resetting the Picture Settings to the Factory Defaults Mode Mode : Dynamic√Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G 50 R 50 Color Tone : Cool1 √Reset MoveEnterReturn Input Picture Sound Channel Setup Listings Mode Mode : Dynamic√Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G 50 R 50 Color Tone : Cool1 √Reset MoveEnterReturn Input Picture Sound Channel Setup Listings Mode Mode : Dynamic Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G 50 R 50 Color Tone: Cool1 Reset MoveEnterReturn Input Picture Sound Channel Setup Listings Cool2 Cool1 Normal Warm1 Warm2 BP68-00513A-00Eng(054~075) 6/3/05 3:08 PM Page 56
English - 57 Changing the Picture Size You can select the picture size which best corresponds to your viewing requirements. 1 Press the MENU button. Press the …or †button to select “Picture”, then press the ENTER button. Press the …or †button to select “Size”, then press the ENTER button. 2 Press the œor √button to select the screen format you want, then press the ENTER button. Press the EXIT button to exit. Alternate method Press the P.SIZE button on the remote control repeatedly to select one of the picture size settings. •“16:9”: Sets the picture to 16:9 wide mode. •“Panorama”: Sets the picture to the wide aspect ratio of a panoramic picture. •“Zoom1”: Magnifies the size of the picture on screen. •“Zoom2”: Magnifies the size of the picture more than “Zoom1”. •“4:3”: Sets the picture to 4:3 normal mode. This is a standard TV screen size. NOTES •You can select only the 16:9 and 4:3 screen sizes in the DTV or Component (720p, 1080i) mode. •When Double ( , ) mode has been set in PIP, the Picture Size cannot be set. •For Zoom1 and Zoom2, you can adjust the size by using the …or †button after pressing the P.SIZE button under the remote’s cover. Picture Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√ MoveEnterReturn Input Picture Sound Channel Setup Listings Size MoveEnterReturn Input Picture Sound Channel Setup Listings 16:9Panorama Zoom1 Zoom2 4:3 BP68-00513A-00Eng(054~075) 6/3/05 3:08 PM Page 57
Picture Control English - 58 Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1 Press the MENU button. Press the …or †button to select “Picture”, then press the ENTER button. 2 Press the …or †button to select “Digital NR”, then press the ENTER button. 3 Press the …or †button to select “Off” or “On”, then press the ENTER button. Press the EXIT button to exit. Picture Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√ MoveEnterReturn Input Picture Sound Channel Setup Listings Picture Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√ MoveEnterReturn Input Picture Sound Channel Setup Listings Picture Mode : Standard Size : 16:9 Digital NR : On DNIe Demo : Off My Color Control Film Mode : Off PIP MoveEnterReturn Input Picture Sound Channel Setup Listings OffOn BP68-00513A-00Eng(054~075) 6/3/05 3:08 PM Page 58
English - 59 Viewing the DNIe Demonstration This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe Demo to On, you can view an applied DNIe and normal picture on the screen simultaneously, for demonstration purposes. Using this function, you can view the difference in the visual quality. 1 Press the MENU button. Press the …or †button to select “Picture”, then press the ENTER button. 2 Press the …or †button to select “DNIe Demo”, then press the ENTER button. 3 Press the …or †button to select “Off” or “On”, then press the ENTER button. Press the EXIT button to exit. Alternate method Press the DNIe button on the remote control repeatedly to select one of the settings. •On: Switches on the DNIe Demo mode. •Off: Switches off the DNIe Demo mode. NOTE •DNIeTM(Digital Natural Image engine) This feature brings you a more detailed image with 3D noise reduction and detail, contrast and white enhancement. DNIe Demo DNIe OnDNIe Off Picture Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√ MoveEnterReturn Input Picture Sound Channel Setup Listings Picture Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√ MoveEnterReturn Input Picture Sound Channel Setup Listings Picture Mode : Standard Size : 16:9 Digital NR : On DNIe Demo : Off My Color Control Film Mode : Off PIP MoveEnterReturn Input Picture Sound Channel Setup Listings Off On BP68-00513A-00Eng(054~075) 6/3/05 3:08 PM Page 59
Picture Control English - 60 Setting the My Color Control Mode My Color Control allows you to adjust colors according to your preference, by adjusting skin, sky, and grass tones using the predefined settings (Red, Green, Blue, Yellow, Pink, Standard, and Custom) without affecting other colors on the screen. Using the My Color Control Function in the Easy Control Menu Skin, sky and grass tones are easily adjustable to suit your preferences. 1Press the MENU button. Press the …or †button to select “Picture”, then press the ENTER button. 2 Press the …or †button to select “My Color Control”, then press the ENTER button. 3 Press the ENTER button to select “Easy Control”. 4 Press the œor √button to select the setting among the various picture settings. The original picture (before adjustment) is shown on the left side, while the selected mode is shown on the right side. •There are seven My Color Control modes: Red, Green, Blue, Yellow, Pink, Standard, and Custom. Press the EXIT button to exit. NOTE •Changing the settings in the “Detail Control” menu (see page 61) will automatically set the My Color Control mode to “Custom”. œ√ Easy Control MoveReturnEnter Picture Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√ MoveEnterReturn Input Picture Sound Channel Setup Listings Picture Mode : Standard√Size : 16:9√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√ MoveEnterReturn Input Picture Sound Channel Setup Listings My Color Control Easy Control : Custom√Detail Control√ MoveEnterReturn Input Picture Sound Channel Setup Listings Custom OriginalCustom œ√ Easy Control MoveReturnEnter RedBlueGreen OriginalBlue BP68-00513A-00Eng(054~075) 6/3/05 3:08 PM Page 60