Samsung HL-R7178W Dlp Tv Owners Instructions
Have a look at the manual Samsung HL-R7178W Dlp Tv Owners Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
English - 131 Adjusting the Picture Quality The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen. 1Press the SOURCE button to select “PC”. 2 Press the MENU button. Press the …or †button to select “Setup”, then press the ENTER button. 3 Press the …or †button to select “PC”, then press the ENTER button. 4 Press the ENTER button to select “Image Lock”, then press the ENTER button. 5 Press the …or †button to select “Coarse” or “Fine”, then press the ENTER button. 6 Pressing the œor √button to remove the picture noise. Press the EXIT button to exit. NOTE •This feature may change the width of the image. If necessary, adjust the position to center. Setup Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√Color Weakness√▼ More MoveEnterReturn Input Picture Sound Channel Setup Listings Setup ▲ MorePC√Port Selection: G-Link√Function Help: Off√CableCARDTM√CableCARDTMSetup√ MoveEnterReturn Input Picture Sound Channel Setup Listings PC Image Lock√Position√Auto Adjustment Image Reset Resolution : 1024 x 768 @60Hz MoveEnterReturn Input Picture Sound Channel Setup Listings •You can also select these options (Coarse, or Fine) by pressing the …or †button. ▲Coarse▼800 ▲Fine▼0 Image Lock MoveEnterReturn Input Picture Sound Channel Setup Listings Coarse 800 Fine 0 BP68-00513A-00Eng(126~143) 6/3/05 3:15 PM Page 131
PC Display English - 132 Changing the Picture Position After connecting the TV to your PC, adjust the position of picture if it is not well-aligned. 1 Press the SOURCE button to select “PC”. 2 Press the MENU button. Press the …or †button to select “Setup”, then press the ENTER button. 3 Press the …or †button to select “PC”, then press the ENTER button. 4 Press the …or †button to select “Position”, then press the ENTER button. 5 Adjust the position of picture by pressing the …/†/œ/√ button. Press the EXIT button to exit. Setup Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√Color Weakness√▼ More MoveEnterReturn Input Picture Sound Channel Setup Listings Setup ▲ MorePC√Port Selection: G-Link√Function Help: Off√CableCARDTM√CableCARDTMSetup√ MoveEnterReturn Input Picture Sound Channel Setup Listings PC Image Lock√Position√Auto Adjustment Image Reset Resolution : 1024 x 768 @60Hz MoveEnterReturn Input Picture Sound Channel Setup Listings Position Input Picture Sound Channel Setup Listings AdjustEnterReturn ▲ ▼ ▼▼ BP68-00513A-00Eng(126~143) 6/3/05 3:15 PM Page 132
1 Press the SOURCE button to select “PC”. 2 Press the MENU button. Press the …or †button to select “Setup”, then press the ENTER button. 3 Press the …or †button to select “PC”, then press the ENTER button. 4 Press the …or †button to select “Auto Adjustment”, then press the ENTER button. The picture quality and position are automatically adjusted, and the picture returns to original view about a few seconds later. Press the EXIT button to exit. English - 133 Setup Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√Color Weakness√▼ More MoveEnterReturn Input Picture Sound Channel Setup Listings Setup ▲ MorePC√Port Selection: G-Link√Function Help: Off√CableCARDTM√CableCARDTMSetup√ MoveEnterReturn Input Picture Sound Channel Setup Listings PC Image Lock√Position√Auto Adjustment Image Reset Resolution : 1024 x 768 @60Hz MoveEnterReturn Input Picture Sound Channel Setup Listings Adjusting the Picture Quality and Position Automatically This feature allows the TV to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically. Auto Adjustment in Progress Please Wait.i BP68-00513A-00Eng(126~143) 6/3/05 3:15 PM Page 133
PC Display English - 134 Changing the Picture Size (PC Mode) You can select the picture size which best corresponds to your viewing requirements. 1 Press the SOURCE button to select “PC”. 2 Press the MENU button. Press the …or †button to select “Picture”, then press the ENTER button. Press the …or †button to select “Size”, then press the ENTER button. 3 Press the œor √button to select the screen format you want, then press the ENTER button. Press the EXIT button to exit. NOTES •“4:3”: Displays the picture as it is without changing the aspect ratio of input source. •“WidePC”: Scales the picture to 92% of the TV screen, regardless of the aspect ratio of the input source. The picture position ( , ) and size ( ) adjustment are available by pressing the …/†/œ/√button. Alternate method Press the P.SIZE button on the remote control repeatedly to change the picture Size. Picture Mode : Standard√Size : WidePC√Digital NR : On√DNIe Demo : Off√My Color Control√Film Mode : Off√PIP√ MoveEnterReturn Input Picture Sound Channel Setup Listings Size AdjustEnterReturn Input Picture Sound Channel Setup Listings WidePC4:3 BP68-00513A-00Eng(126~143) 6/3/05 3:15 PM Page 134
English - 135 Viewing the Current Resolution You can get the resolution information of your PC. 1 Press the SOURCE button to select “PC”. 2 Press the MENU button. Press the …or †button to select “Setup”, then press the ENTER button. 3 Press the …or †button to select “PC”, then press the ENTER button. The resolution information is displayed on the screen. NOTE •To change the resolution, see pages 129~130. Setup Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√Color Weakness√▼ More MoveEnterReturn Input Picture Sound Channel Setup Listings Setup ▲ MorePC√Port Selection: G-Link√Function Help: Off√CableCARDTM√CableCARDTMSetup√ MoveEnterReturn Input Picture Sound Channel Setup Listings PC Image Lock√Position√Auto Adjustment Image Reset Resolution : 1024 x 768 @60Hz MoveEnterReturn Input Picture Sound Channel Setup Listings BP68-00513A-00Eng(126~143) 6/3/05 3:15 PM Page 135
PC Display English - 136 Initializing the Picture Settings You can replace all picture settings with the factory default values. 1 Press the SOURCE button to select “PC”. 2 Press the MENU button. Press the …or †button to select “Setup”, then press the ENTER button. 3 Press the …or †button to select “PC”, then press the ENTER button. 4 Press the …or †button to select “Image Reset”, then press the ENTER button. The picture settings are replaced with the factory default values. Press the EXIT button to exit. Setup Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√Color Weakness√▼ More MoveEnterReturn Input Picture Sound Channel Setup Listings Setup ▲ MorePC√Port Selection: G-Link√Function Help: Off√CableCARDTM√CableCARDTMSetup√ MoveEnterReturn Input Picture Sound Channel Setup Listings PC Image Lock√Position√Auto Adjustment Image Reset Resolution : 1024 x 768 @60Hz MoveEnterReturn Input Picture Sound Channel Setup Listings Image Reset is completed.i BP68-00513A-00Eng(126~143) 6/3/05 3:15 PM Page 136
Appendix BP68-00513A-00Eng(126~143) 6/3/05 3:15 PM Page 137
Appendix English - 138 Replacing the Lamp •Why do I need to replace the lamp? The lamp used in a DLP TV has a limited lifespan. For the best screen quality it needs to be replaced periodically. After replacing the lamp, the screen quality will be bright and clear as new. •When do I need to replace it? It should be replaced when the screen becomes darker, less clear or when all three LEDs on the front (TIMER, LAMP, & STAND BY/TEMP) are flashing. •Check before lamp replacement 1. The lamp must be the same code number and type. 2. The lamp type is indicated on the side of the TV. It is also indicated on the lamp case. 3. After checking the code number for the lamp, give the code number to the store where you purchased the TV or to a Samsung Service center. •Caution 1. Replace with the correct code numbered lamp to avoid damage to the TV. 2. Turn the power off and wait for 30 minutes before replacing the lamp as it will be hot. 3. Do not touch the glass part of the lamp with your bare hands and do not insert any foreign object inside the cover as it may cause poor screen quality, electric shock or fire. 4. Do not place the old lamp near flammable objects or within the reach of children. 5. Be sure to connect this TV directly to an AC wall outlet. If the TVs AC plug is connected to a cable box or other source, it will not allow for proper cool down time. BP68-00513A-00Eng(126~143) 6/3/05 3:15 PM Page 138
English - 139 NOTES •Be sure the replacement Lamp is the same type. •After replacing the lamp, align the lamp cover with the groove and secure the screws. •The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective circuit). • For replacement, you will need a 5.91-Inch screwdriver and a pair of gloves. 1 Unplug TV, then use a screwdriver to remove the screws. 2 Remove the Lamp cover. 3 Remove the screw securing the Lamp by using a screwdriver. 4 Separate the Lamp from the engine by holding the handle and pulling it out. 5 To reinstall the Lamp, follow these steps in reverse order. BP68-00513A-00Eng(126~143) 6/3/05 3:15 PM Page 139
Appendix English - 140 Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest Samsung authorized service center. Possible Solution Try another channel. Adjust the antenna. Check all wire connections. Try another channel. Adjust the antenna. Try another channel. Press the SOURCE button. Make sure the TV is plugged in. Check the antenna connections. Check that the Mute feature is off. Make sure the program is broadcast in color. Adjust the picture settings. Adjust the antenna. Check all wire connections. If you are using a VCR, check the tracking. Unplug the TV for 30 seconds, then try operating it again. Press the MODE button to put your remote control into TV mode. Make sure the remote has batteries. Make sure the wall outlet is working. Make sure the TV is plugged in. Make sure the remote has batteries. Please check the digital signal strength and input antenna. There is a sound when both Air and Cable are set to “Yes” in the TV Guide On ScreenTMSetup. The sound is made by the TV trying to receive TV Guide On Screen TMdata in Standby mode, and is not a defect. Set up the Antenna (Air)/Cable according to the connection status in the TV Guide On Screen TMSetup. Continued... Problem Poor picture quality. Poor sound quality. No picture or sound. No color, wrong colors or tints. Picture rolls vertically. The TV operates erratically. Your remote control does not operate your TV. The TV won’t switch on. Digital broadcasting screen problem. There is a “clicking” sound repeatedly in Standby mode. BP68-00513A-00Eng(126~143) 6/3/05 3:15 PM Page 140