Samsung HL-R6767W Dlp Tv Owners Instructions

English - 111
When Connecting D-Net (IEEE1394) Compatible devices
1
The last device in the chain may not be looped back to the TV as the TV may not be able to
work with the other devices.
To connect two or more D-Net (IEEE1394) Compatible devices, follow the diagram below.
A maximum 10 D-Net (IEEE1394)
Compatible devices can be 
connected.
Do not connect D-Net (IEEE1394)
Compatible devices in a way 
that creates a loop.
NOTE
•IEEE1394 cables longer than 14.76 feet (177.16 inches) should not be used...

Using the D-Net
English - 112
Connection Options
There are two different connection options for connecting D -Net (IEEE1394) compatible devices. 
Select the most suitable option according to your network of audio/video products.
The Direct Device-To-Device Option
D-Net (IEEE1394) permits the chaining of devices, unlike 
analog audio and video connections where each device
needs to be individually connected to the TV. This allows
you to connect your D-VHS to your 1394 Set-Top Box
only, then connect the...

English - 113
4-Pin and 6-Pin Connectors
Two different types of connectors are used for IEEE1394 terminals and cables, a 4-pin and 
a 6-pin.
The 4-pin connector sends digital audio, digital video and digital
control signals to and from devices. The TV has two available 4-pin
connection jacks, of which two are at the back.
The 6-pin connector also sends digital audio, video and control 
signals, but can also send low voltage electrical power. There are 
no 6 pin connectors on this TV.
It is not possible...

Using the D-Net
English - 114
Selecting a D-Net device
Prior to viewing an IEEE1394 device, it first needs to be selected in the D-Net Device List.
1
Connect the relevant D-Net (IEEE1394) Compatible device in the list.
(See “How to connect compatible IEEE1394 Devices” on page 110)
2
Press the D-Net button on the remote control.
3
Select a connected D-Net device by pressing
the …or †button.
4
To select a device, press the ENTER button. 
Then display the D-Net device control panel 
and operate the selected...

English - 115
Follow the instructions below to activate D-Net in the menu.
1
Press the MENU button. 
Press the ENTER button to select “Input”.
2
Press the …or †button to select 
“D-Net”, then press the ENTER button.
3
Press the …or †button to select a 
D-Net (IEEE1394) connected device. •The TV and all other devices,
connected on the D-Net (IEEE1394)
chain, appear in the D-Net device list.
•This is also available using the D-Net
button on the remote control.
Input
Source List : TV√Edit Name√Anynet
D-Net...

Using the D-Net
English - 116
The D-Net control panel
Select an IEEE1394 from the D-Net device list. The TV will then display the D-Net control panel. 
This panel allows you to use the TV remote control to control the selected IEEE1394 device.
1
Press the D-Net button on the remote control.
2
Press the …or †button to select a 
D-Net (IEEE1394) connected device. 
Press the ENTER button.
3
Use the …, †, œ, √buttons on the remote 
control to move through the options (see next 
page) available in the D-Net...

English - 117
NOTES
•Press the …, †, œ, √buttons on the remote control to select a control panel button and press the
ENTER button on the remote control.
•Depending on the device being controlled, not all options on the D-Net control panel may be available.
•The selected IEEE1394 device and its functions can be controlled through the equivalent buttons on the
TV’s remote control.
•Not all functions are supported for all IEEE1394 devices.
•It is possible to use direct keys on the remote control (rewind,...

Using the D-Net
English - 118
Operating Tips
1) When the screen is switched to the TV program. 
- When you select the first button, the TV button, in the Device List, it switches to the TV program. 
- Although you have selected another device from the Device List, if detecting a video signal from 
the device fails, the “Connection failed” message appears and the screen automatically switches 
to the TV program.
- When the 1394 connection to the selected device is disconnected, the screen automatically...

English - 119
10) When multiple devices are connected, some devices may appear and then disappear periodically 
in the Device List. This is because some devices malfunction when multiple devices are connected.
If this occurs, you have to discover and remove the defective device from the connection by 
removing the devices one by one.  
11)  When multiple devices are connected, the response time may be relatively long when selecting a 
device. This may happen when there is a device(s) that malfunctions...

Using the D-Net
English - 120
Recording Tips
1) Recording using the Target List while also watching the screen being recorded. 
- Check that the AVHDD and DVHS devices are connected. 
- Select a source device to be recorded and press the Target button. 
- Select a device to be recorded from the Target List. 
2) Recording a program in the Program List of AVHDD using another device. 
- Select an AVHDD program to be recorded from the Program List and press Copy. 
- Select the target device from the Target...