Samsung Hl-r5087w Dlp Tv Instruction Manual
Have a look at the manual Samsung Hl-r5087w Dlp Tv Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
English - 71 Freezing the Picture Press the STILL button to freeze a moving picture. (Normal sound will still be heard.) Press again to cancel. NOTE •In the PIP mode, the main and sub pictures are stilled at the same time. 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 71
English - 72 Picture Control Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue Screen” mode to “Off”. 1 Press the MENU button. Press the …or †button to select “Setup”, then press the ENTER button. 2 Press the …or †button to select “Blue Screen”, then press the ENTER button. 3 Press the …or †button to select “On” or “Off”, then press the ENTER button. Press the EXIT button to exit. Setup Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Setup Language : English√Time√V-Chip√Caption√Menu Transparency: Medium√Blue Screen : Off√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Setup Language : English Time V-Chip Caption Menu Transparency: Medium Blue Screen : Off ▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide OffOn 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 72
Sound Control 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 73
English - 74 Sound Control Sound Control You can control and customize the sound levels and settings of the TV with the remote control. Adjusting the Volume Press the VOL+ or VOL– buttons to increase or decrease the volume. Using the MUTE Button At any time, you can temporarily cut off the sound. Press the MUTE button on the remote control. The message “Mute” is displayed and the sound cuts off. To turn mute off, press the MUTE button again or press either the VOL+ or VOL– button. Customizing the Sound The sound settings can be adjusted to suit your personal preference. (Alternatively, you can use one of the automatic settings. See next page.) 1 Press the MENU button. Press the …or †button to select “Sound”, then press the ENTER button. 2 Press the …or †button to select “Equalizer”, then press the ENTER button. Continued... Mute Sound Mode : Standard√Equalizer√SRS TSXT : Off√Multi-Track Options√Auto Volume : Off√Internal Mute : Off√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Sound Mode : Standard√Equalizer√SRS TSXT : Off√Multi-Track Options√Auto Volume : Off√Internal Mute : Off√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide 5_BP68-00448A-01(74~83) 1/20/05 5:15 PM Page 74
English - 75 3 Press the œor √button to select a particular item to be changed. Press the …or †button to increase or decrease the selected frequency. Press the EXIT button to exit. Using Automatic Sound Settings Your TV has automatic sound settings (“Standard”, “Music”, “Movie”, and “Speech”) that are preset at the factory. You can select “Custom”, which automatically recalls your personalized sound settings. 1 Press the MENU button. Press the …or †button to select “Sound”, then press the ENTER button. 2 Press the ENTER button to select “Mode”. Press the …or †button to select a particular item, then press the ENTER button. Press the EXIT button to exit. •Choose “Standard” for the standard factory settings. •Choose “Music” when watching music videos or concerts. •Choose “Movie” when watching movies. •Choose “Speech” when watching a show that is mostly dialog (i.e., news). •Choose “Custom” to recall your personalized settings. Equalizer MoveAdjustReturn Input Picture Sound Channel Setup Guide 100 300 1K 3K 10K R L+ 0 - Sound Mode : Standard√Equalizer√SRS TSXT : Off√Multi-Track Options√Auto Volume : Off√Internal Mute : Off√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Sound Mode : Custom Equalizer SRS TSXT : Off Multi-Track OptionsAuto Volume : Off Internal Mute : Off ▼ More MoveEnterReturn Input Picture Sound Channel Setup GuideStandard Music Movie Speech Custom 5_BP68-00448A-01(74~83) 1/20/05 5:15 PM Page 75
English - 76 Sound Control Setting the SRS TSXT TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. Trusurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. 1 Press the MENU button. Press the …or †button to select “Sound”, then press the ENTER button. 2 Press the …or †button to select “SRS TSXT”, then press the ENTER button. 3 Press the …or †button to select “Off”, “3D Mono” or “Stereo”, then press the ENTER button. Press the EXIT button to exit. Alternate method Press the SRS button on the remote control repeatedly to select one of the settings. Sound Mode : Standard√Equalizer√SRS TSXT : Off√Multi-Track Options√Auto Volume : Off√Internal Mute : Off√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Sound Mode : Standard√Equalizer√SRS TSXT : Off√Multi-Track Options√Auto Volume : Off√Internal Mute : Off√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Sound Mode : Standard Equalizer SRS TSXT : Off Multi-Track OptionsAuto Volume : Off Internal Mute : Off ▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Off3D MonoStereo 5_BP68-00448A-01(74~83) 1/20/05 5:15 PM Page 76
English - 77 Auto Volume Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the volume every time the channel is changed. “Auto Volume” automatically adjusts the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. 1 Press the MENU button. Press the …or †button to select “Sound”, then press the ENTER button. 2 Press the …or †button to select “Auto Volume”, then press the ENTER button. 3 Press the …or †button to select “Off” or “On”, then press the ENTER button. Press the EXIT button to exit. Sound Mode : Standard√Equalizer√SRS TSXT : Off√Multi-Track Options√Auto Volume : Off√Internal Mute : Off√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Sound Mode : Standard√Equalizer√SRS TSXT : Off√Multi-Track Options√Auto Volume : Off√Internal Mute : Off√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Sound Mode : Standard Equalizer SRS TSXT : Off Multi-Track OptionsAuto Volume : Off Internal Mute : Off ▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide OffOn 5_BP68-00448A-01(74~83) 1/20/05 5:15 PM Page 77
English - 78 Sound Control Choosing a Multi-Channel Sound (MTS) track The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages). The availability of these additional “multitracks” depends upon the program. 1 Press the MENU button. Press the …or †button to select “Sound”, then press the ENTER button. 2 Press the …or †button to select “Multi-Track Options”, then press the ENTER button. 3 Press the ENTER button to select “Preferred Language”. Press the …or †button to choose the language (English, Español or Français) you want, then press the ENTER button. Press the EXIT button to exit.•Quick way to access the MTS menu: Just press the MTS button on the remote control. You can listen in a language other than the favorite language by pressing the MTS button. •The text at the bottom of the menu tells you if the incoming audio is Spanish, French or English. Sound Mode : Standard√Equalizer√SRS TSXT : Off√Multi-Track Options√Auto Volume : Off√Internal Mute : Off√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Sound Mode : Standard√Equalizer√SRS TSXT : Off√Multi-Track Options√Auto Volume : Off√Internal Mute : Off√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Multi-Track Options Preferred Language: EnglishMulti-Track Sound: Stereo MoveEnterReturn Input Picture Sound Channel Setup GuideEnglishEspañolFrançais Digital 5_BP68-00448A-01(74~83) 1/20/05 5:15 PM Page 78
English - 79 Choosing a Multi-Channel Sound (MTS) track Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP. 1 Press the MENU button. Press the …or †button to select “Sound”, then press the ENTER button. 2 Press the …or †button to select “Multi-Track Options”, then press the ENTER button. 3 Press the …or †button to select “Multi-Track Sound”, then press the ENTER button. Press the …or †button to select a setting you want, then press the ENTER button. Press the EXIT button to exit. Alternate method Press the MTS button on the remote control repeatedly to select an external signal source. NOTES •Choose “Mono” for channels that are broadcasting in mono, or if you are having difficulty receiving a stereo signal. •Choose “Stereo” for channels that are broadcasting in stereo. •Choose “SAP” to listen to the Separate Audio Program, which is usually a foreign-language translation. Sound Mode : Standard√Equalizer√SRS TSXT : Off√Multi-Track Options√Auto Volume : Off√Internal Mute : Off√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Sound Mode : Standard√Equalizer√SRS TSXT : Off√Multi-Track Options√Auto Volume : Off√Internal Mute : Off√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Multi-Track Options Preferred Language: EnglishMulti-Track Sound: Stereo MoveEnterReturn Input Picture Sound Channel Setup GuideMonoStereoSAP Stereo Analog 5_BP68-00448A-01(74~83) 1/20/05 5:15 PM Page 79
English - 80 Sound Control Choosing a Digital Sound Format Digital sound can be output from the rear-panel connector on your TV. The digital sound output is an optical connector labeled “Optical Out”. After connecting an optical digital-audio component, you must specify the transmission format (Dolby or PCM, as appropriate to your digital audio component). See the owners manual of your Digital Audio component for further information. 1 Press the MENU button. Press the …or †button to select “Sound”, then press the ENTER button. 2 Press the …or †button to select “Digital Output”, then press the ENTER button. Press the …or †button to select “Dolby Digital” or “PCM”, then press the ENTER button. Press the EXIT button to exit. Manufactured under license from Dolby Laboratories. “Dolby” and the double D-symbol are trademarks of Dolby Laboratories. Sound Mode : Standard√Equalizer√SRS TSXT : Off√Multi-Track Options√Auto Volume : Off√Internal Mute : Off√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Sound ▲ More Digital Output : PCM Sound Select : Main Melody : On MoveEnterReturn Input Picture Sound Channel Setup GuideDolby DigitalPCM Digital 5_BP68-00448A-01(74~83) 1/20/05 5:15 PM Page 80