Samsung Hl-r5087w Dlp Tv Instruction Manual
Have a look at the manual Samsung Hl-r5087w Dlp Tv Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
English - 51 Checking the Digital-Signal Strength Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels. 1 Press the MENU button. Press the …or †button to select “Channel”, then press the ENTER button. 2 Press the …or †button to select “Signal Strength”, then press the ENTER button. If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal. Press the EXIT button to exit. Channel Antenna : Cable√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Channel ▲ More Signal Strength√LNA : Off√ MoveEnterReturn Input Picture Sound Channel Setup Guide Signal Strength EnterReturn Input Picture Sound Channel Setup Guide OK Digital 3_BP68-00448A-01(32~53) 1/20/05 5:11 PM Page 51
English - 52 Channel Control LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). 1 Press the MENU button. Press the …or †button to select “Channel”, then press the ENTER button. 2 Press the …or †button to select “LNA”, then press the ENTER button. 3 Press the …or †button to select “On”, then press the ENTER button. Pressing the …or †button will alternate between “On” and “Off”. 4 Press the EXIT button to exit. NOTE •LNA functions only when antenna is set to AIR. The settings will be stored separately in each channel. Channel Antenna : Air√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Channel ▲ More Signal Strength LNA : On MoveEnterReturn Input Picture Sound Channel Setup Guide Channel ▲ More Signal Strength√LNA : On√ MoveEnterReturn Input Picture Sound Channel Setup Guide OffOn 3_BP68-00448A-01(32~53) 1/20/05 5:11 PM Page 52
Picture Control 3_BP68-00448A-01(32~53) 1/20/05 5:11 PM Page 53
English - 54 Picture Control Picture Control You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”, and “Tint” according to personal preference. (Alternatively, you can use one of the automatic settings. See next page.) Customizing the Picture 1 Press the MENU button. Press the …or †button to select “Picture”, then press the ENTER button. 2 Press the ENTER button to select “Mode”. 3 Press the …or †button to select a particular item, then press the ENTER button. Press the œor √button to decrease or increase the value of a particular item. Resetting the Picture Settings to the Factory Defaults You can return to the factory default picture settings. 4 Press the MENU button to display the “Mode” menu. Press the …or †button to select “Reset”, then press the ENTER button. The previously adjusted picture settings will be reset to the factory defaults. ▲Contrast▼90 NOTE •“Tint” doesn’t operate in HDMI/DVI or 480p- Component or higher modes. Picture Mode : Standard√Color Tone : Warm1√Size : 16:9√Digital NR : On√DNIe : On√My Color Control√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Mode Mode : Standard√Contrast 90 Brightness 50 Sharpness 65 Color 55 Tint G 50 R 50 Reset MoveEnterReturn Input Picture Sound Channel Setup Guide Mode Mode : Standard√Contrast 90 Brightness 50 Sharpness 65 Color 55 Tint G 50 R 50 Reset MoveEnterReturn Input Picture Sound Channel Setup Guide 4_BP68-00448A-01(54~73) 1/20/05 5:13 PM Page 54
English - 55 Using Automatic Picture Settings Your TV has automatic picture settings (“Dynamic”, “Standard” and “Cinema”) that are preset at the factory. You can select “Standard” which automatically recalls your personalized picture settings. 1 Press the MENU button. Press the …or †button to select “Picture”, then press the ENTER button. 2 Press the ENTER button to select “Mode”. 3 Press the ENTER button again to select “Mode”. Press the …or †button to select a particular item, then press the ENTER button. Press the EXIT button to exit. •Choose “Dynamic” for viewing the TV during the day or when there is a bright light in the room. •Choose “Standard” for the standard factory settings. •Choose “Cinema” when viewing a movie. Picture Mode : Standard√Color Tone : Warm1√Size : 16:9√Digital NR : On√DNIe : On√My Color Control√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Mode Mode : Standard√Contrast 90 Brightness 50 Sharpness 65 Color 50 Tint G 50 R50 Reset MoveEnterReturn Input Picture Sound Channel Setup Guide Mode Mode Standard Contrast 90 Brightness 50 Sharpness 65 Color 50 Tint G 50 R50 Reset MoveEnterReturn Input Picture Sound Channel Setup GuideDynamic Standard Cinema 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 55
English - 56 Picture Control Selecting the Color Tone 1 Press the MENU button. Press the …or †button to select “Picture”, then press the ENTER button. 2 Press the …or †button to select “Color Tone”, then press the ENTER button. 3 Press the …or †button to select “Cool2”, “Cool1”, “Normal”, “Warm1”, or “Warm2”, then press the ENTER button. Press the EXIT button to exit. NOTE •Color tone is not available in the “Cinema” picture mode. Picture Mode : Standard√Color Tone : Warm1√Size : 16:9√Digital NR : On√DNIe : On√My Color Control√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Picture Mode : Standard√Color Tone : Warm1√Size : 16:9√Digital NR : On√DNIe : On√My Color Control√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Picture Mode : Standard Color Tone : Warm1 Size Digital NR : On DNIe : On My Color Control ▼ More MoveEnterReturn Input Picture Sound Channel Setup GuideCool2 Cool1 Normal Warm1 Warm2 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 56
Changing the Picture Size You can select the picture size which best corresponds to your viewing requirements. English - 57 1 Press the MENU button. Press the …or †button to select “Picture”, then press the ENTER button. Press the …or †button to select “Size”, then press the ENTER button. 2 Press the œor √button to select the screen format you want, then press the ENTER button. Press the EXIT button to exit. Alternate method Press the ASPECT button on the remote control repeatedly to select one of the picture size settings. •“16:9”: Sets the picture to 16:9 wide mode. •“Panorama”: Use this mode for the wide aspect ratio of a panoramic picture. •“Zoom1”: Magnifies the size of the picture on screen. •“Zoom2”: Magnifies the size of the picture more than “Zoom1”. You can also move the picture on screen using the scrooll function. Press the …or †button to scroll the picture. •“4:3”: Sets the picture to 4:3 normal mode. This is a standard TV screen size. NOTE •You can select only the 16:9 and 4:3 screen sizes in the Component (720p, 1080i) mode. Picture Mode : Standard√Color Tone : Warm1√Size : 16:9√Digital NR : On√DNIe : On√My Color Control√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Size MoveEnterReturn Input Picture Sound Channel Setup Guide 16:9Panorama Zoom1 Zoom2 4:3 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 57
Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. English - 58 Picture Control 1 Press the MENU button. Press the …or †button to select “Picture”, then press the ENTER button. 2 Press the …or †button to select “Digital NR”, then press the ENTER button. 3 Press the …or †button to select “Off” or “On”, then press the ENTER button. Press the EXIT button to exit. Picture Mode : Standard√Color Tone : Warm1√Size : 16:9√Digital NR : On√DNIe : On√My Color Control√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Picture Mode : Standard√Color Tone : Warm1√Size : 16:9√Digital NR : On√DNIe : On√My Color Control√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Picture Mode : Standard Color Tone : Warm1 Size : 16:9 Digital NR : On DNIe : On My Color Control ▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide OffOn 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 58
English - 59 DNIeTM (Digital Natural Image engine) This feature brings you a more detailed image with 3D noise reduction and detail, contrast and white enhancement. 1 Press the MENU button. Press the …or †button to select “Picture”, then press the ENTER button. 2 Press the …or †button to select “DNIe”, then press the ENTER button. 3 Press the …or †button to select “Off”, “Demo” or “On”, then press the ENTER button. Press the EXIT button to exit. Alternate method Press the DNIe button on the remote control repeatedly to select one of the settings. •On: Switches on the DNIe mode. •Off: Switches off the DNIe mode. •Demo: The screen before applying DNIe appears on the right and the screen after applying DNIe appears on the left. DNIe Demo DNIe OnDNIe Off Picture Mode : Standard√Color Tone : Warm1√Size : 16:9√Digital NR : On√DNIe : On√My Color Control√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Picture Mode : Standard√Color Tone : Warm1√Size : 16:9√Digital NR : On√DNIe : On√My Color Control√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Picture Mode : Standard Color Tone : Warm1 Size : 16:9 Digital NR : On DNIe : On My Color Control ▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide OffDemoOn 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 59
Operation Setting the My Color Control Mode My Color Control allows users to adjust colors according to their preferences, by adjusting skin, sky, and grass tones using the predefined settings (“Blue”, “Green”, “Pink”, “Standard”, and “Custom”) without affecting other colors on the screen. Using the Easy Control Menu 1 Press the MENU button. Press the …or †button to select “Picture”, then press the ENTER button. 2 Press the …or †button to select “My Color Control”, then press the ENTER button. 3 Press the ENTER button to select “Easy Control”. Press the œor √button to select one of the picture settings you want. The original picture (before adjustment) is shown on the left side, while the selected mode is shown on the right side. Press the ENTER button to accept the selected mode. Press the EXIT button to exit. •“Blue”: Emphasizes Clear Blues. •“Green”: Emphasizes Mild Greens. •“Pink”: Emphasizes Warm Skin Colors. •“Standard”: Standard Picture. English - 60 NOTES •Changing the settings in the “Detail Control” menu (see next page) will automatically set the My Color Control mode to “Custom”. •The My Color Control feature operates only when DNIe is set to On and “Demo” mode. œ Easy Control MoveReturnEnter OriginalCustom Picture Mode : Standard√Color Tone : Warm1√Size : 16:9√Digital NR : On√DNIe : On√My Color Control√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide Picture Mode : Standard√Color Tone : Warm1√Size : 16:9√Digital NR : On√DNIe : On√My Color Control√▼ More MoveEnterReturn Input Picture Sound Channel Setup Guide My Color Control Easy Control : Custom√Detail Control√ MoveEnterReturn Input Picture Sound Channel Setup Guide StandardCustom 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 60