Samsung HL-R4667W DLP TV User Manual

							Appendix
BP68-00469A-00(118~135)  2/24/05  10:11 AM  Page 131 
						

							Appendix
English - 132
PIP Settings
O:PIP and swap operate
▲:PIP operate and swap doesn’t operate
X:PIP doesn’t operate
Replacing the Lamp
•Why do I need to replace the lamp?
The lamp used in a DLP TV has a limited lifespan. For the best screen quality it needs to be 
replaced periodically. After replacing the lamp, the screen quality will be bright and clear as new.
•When do I need to replace it?
It should be replaced when the screen becomes darker, less clear or when all three LEDs on the
front (TIMER, LAMP, & STAND BY/TEMP) are flashing.
•Check before lamp replacement 
1. The lamp must be the same code number and type. 
2. The lamp type is indicated on the right side of the TV. It is also indicated on the lamp case. 
3. After checking the code number for the lamp, give the code number to the store where you 
purchased the TV or to a Samsung Service center. 
•Caution
1. Replace with the correct code numbered lamp to avoid damage to the TV. 
2. Turn the power off and wait for 30 minutes before replacing the lamp as it will be hot. 
3. Do not touch the glass part of the lamp with your bare hands nor insert any foreign object
inside the cover as it may cause poor screen quality, electric shock or fire.
4. Do not place the old lamp near flammable objects or within the reach of children. 
5.  Be sure to connect this TV directly to an AC wall outlet. If the TV’s AC plug is connected to a
cable box or other source, it will not allow for proper cool down time. 
SubMain
ATSC  QAM  NTSC  AV1  AV2  AV3  S-Video1  S-Video2  S-Video3  Component1  Component2  HDMI  PC   D-Net
X
X
▲
▲
▲
▲
▲
▲
▲
▲
▲X
X
▲
▲
▲
▲
▲
▲
▲
▲
▲X
X
O
O
O
O
O
O
O
O
OX
X
O
X
O
O
O
O
O
O
OX
X
O
O
X
O
O
O
O
O
OX
X
O
O
O
X
O
O
O
O
OX
X
O
O
O
O
X
O
O
O
OX
X
O
O
O
O
O
X
O
O
OX
X
O
O
O
O
O
O
X
O
OX
X
O
O
O
O
O
O
O
X
OX
X
O
O
O
O
O
O
O
O
XX
X
▲
▲
▲
▲
▲
▲
▲
▲
▲X
X
▲
▲
▲
▲
▲
▲
▲
▲
▲▲
▲
▲
▲
▲
▲
▲
▲
▲
X
XATSC
QAM
NTSC
AV1
AV2
AV3
S-Video1
S-Video2
S-Video3
Component1
Component2
BP68-00469A-00(118~135)  2/24/05  10:11 AM  Page 132 
						

							English - 133
• For replacement, you will need a 5.91-Inch screwdriver and a pair of gloves.
1
Unplug TV, then use a 
screwdriver to remove the 
screws.
2
Remove the Lamp cover.
3
Remove the screw securing
the Lamp by using a 
screwdriver.
4
Separate the Lamp from the
engine by holding the handle
and pulling it out.
5
To reinstall the Lamp, follow
these steps in reverse order.
NOTES
•Be sure the replacement Lamp is the same type.
•After replacing the lamp, align the lamp cover with the groove and secure the screws.
•The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective 
circuit).
BP68-00469A-00(118~135)  2/24/05  10:11 AM  Page 133 
						

							Appendix
English - 134
Troubleshooting 
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these
troubleshooting tips apply, then call your nearest Samsung authorized service center.
Possible Solution
Try another channel.
Adjust the antenna.
Check all wire connections.
Try another channel.
Adjust the antenna.
Make sure the MUTE button is off.
Try another channel.
Press the SOURCE button.
Make sure the TV is plugged in.
Check the antenna connections.
Make sure the program is broadcasted in color.
Adjust the picture settings.
Adjust the antenna.
Check all wire connections.
If you are using a VCR, check the tracking.
Unplug the TV for 30 seconds, then try operating it
again.
Press the MODE button to put your remote control 
into TV mode.
Make sure the remote has batteries.
Make sure the wall outlet is working.
Make sure the TV is plugged in.
Make sure the remote has batteries.
Please check the digital signal strength and input
antenna.
•The display panel used for the DLP TV is composed of many tiny pixels.
These pixels may occasionally appear on the screen.
Problem
Poor picture quality.
Poor sound quality.
No picture or sound.
No color, wrong colors or tints.
Picture rolls vertically.
The TV operates erratically.
Your remote control does not 
operate your TV.
The TV won’t switch on.
Digital broadcasting screen 
problem.
BP68-00469A-00(118~135)  2/24/05  10:11 AM  Page 134 
						

							English - 135
Cleaning and Maintaining Your TV
With proper care, your TV will give you many years of service. Please follow these guidelines to 
get the maximum performance from your TV.
Placement
•Do not put the TV near extremely hot, cold, humid or dusty places.
•Do not place the TV near appliances with electric motors that create magnetic fields, such as 
vacuum cleaners.
•Keep the ventilation openings clear; do not place the TV on a soft surface, such as cloth or 
paper.
•Place the TV in a vertical position only.
Liquids
•Do not handle liquids near or on the TV. Liquids that spill into it can cause serious damage.
Cabinet
•Never open the cabinet or touch the parts inside.
•Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or chemicals.
•Do not put heavy objects on top of the cabinet.
•This DLP TV projects the image onto a large screen by applying an optical system. 
If you place the TV set face down, it might cause a problem because dirt, or some other 
contaminant may become attached to the inside of the TV set. 
Temperature
•If your TV is suddenly moved from a cold to a warm place, unplug the power cord, and allow 
at least two hours for moisture that may have formed inside the unit to dry completely.
Using Your TV in Another Country
If you plan to take your TV with you to a foreign country, please be aware of the different 
television systems that are in use around the world. A TV designed for one system may not work
properly with another system due to differences in the TV channel frequencies.
Specifications
Model
Voltage
Frequency of Operation
Power Consumption
Dimensions
(W x D x H)
WeightHL-R4667W 
AC 110-120V~ 
60Hz
230 watts
42.83 x 13.44 x 32.05 inches
1088 x 341.5 x 814 mm
30.3 Kg / 66.80 lbsHL-R5067W 
AC 110-120V~ 
60Hz
230 watts
46.54 x 14.00 x 34.25 inches
1182 x 355.5 x 870 mm
33 Kg / 72.75 lbsHL-R5667W 
AC 110-120V~ 
60Hz
230 watts
52.36 x 15.26 x 37.87 inches
1330 x 387.5 x 962 mm
36.7 Kg / 80.91 lbsHL-R6167W 
AC 110-120V~ 
60Hz
230 watts
56.93 x 18.37 x 41.59 inches
1446 x 466.5 x 1056.5 mm
42.9 Kg / 94.58 lbs
BP68-00469A-00(118~135)  2/24/05  10:11 AM  Page 135 
						

							1-800-SAMSUNG (1-800-726-7864)
Samsung Electronics America 
Service Division
400 Valley Road, Suite 201
Mount Arlington, NJ 07856
www.samsung.com
Samsung Electronics Canada Inc. 
Samsung Customer Care  
7037 Financial Drive  
Mississauga, Ontario  
L5N 6R3
www.samsung.ca
BP68-00469A-00
BP68-00469A-00(cover)  2/22/05  8:54 AM  Page 2