Samsung HL P5063W DLP TV User Manual

Changing the Location of the Sub Picture
61
Changing the Size of the Sub Picture
60
Special Features
1
Press the MENU button.
Press the 
…
or 
†
button to
select “Picture”, then press
the ENTER button.
2
Press the 
…
or 
†
button to
select “PIP”, then press the
ENTER button.
3
Press the 
…
or 
†
button to
select “Size”, then press the
ENTER button.
Press the 
…
or 
†
button to
select a size you want, then
press the ENTER button.
Press the EXIT button to exit.
Alternate methodPress the SIZE button on the...

Changing the Channel of the Sub PictureAfter you set the signal source (antenna or cable) of sub picture, it is easy to change channels.
63
62
Special Features
1
Press the MENU button.
Press the 
…
or 
†
button to
select “Picture”, then press
the ENTER button.
2
Press the 
…
or 
†
button to
select “PIP”, then press the
ENTER button.
3
Press the 
…
or 
†
button to
select “Channel”, then press
the ENTER button.
Press the 
…
or 
†
button to
select a channel you want,
then press the ENTER button.
Press the...

65
64
Special Features
Setting the SRS TSXTTruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel
content over two speakers. Trusurround delivers a compelling, virtual surround sound experience
through any two-speaker playback system, including internal television speakers. It is fully
compatible with all multichannel formats.
1
Press the MENU button.
Press the 
…
or 
†
button to
select “Sound”, then press
the ENTER button.
2
Press the 
…
or 
†
button to
select...

67
Special Features
66
Auto VolumeEach broadcasting station has its own signal conditions, and it is inconvenient to adjust the
volume every time the channel is changed. “Auto Volume” automatically adjusts the volume of the
desired channel by lowering the sound output when the modulation signal is high or by raising
the sound output when the modulation signal is low.
1
Press the MENU button.
Press the 
…
or 
†
button to
select “Sound”, then press
the ENTER button.
2
Press the 
…
or 
†
button to
select...

69
68
Special Features
Using the V-Chip (USA)Access to channels and programs is controlled by a password (i.e., a 4-digit secret code that is
defined by the user). The on-screen menu will instruct you to assign a password (and you can
change it later, if necessary).NOTE•
The V-Chip doesn’t function when the PIP is active.
How to Change Your Password1
Press the MENU button.
Press the 
…
or 
†
button to
select “Setup”, then press the
ENTER button.
Press the 
…
or 
†
button to
select “V-Chip”, then press...

71
70
Special Features
How to Set up Restrictions Using the “TV Parental Guidelines”The parental restrictions can be set up using either of two methods: The “TV Parental Guidelines”
or “MPAA Rating”.
1
Press the MENU button.
Press the 
…
or 
†
button to
select “Setup”, then press the
ENTER button.
2
Press the 
…
or 
†
button to
select “V-Chip”, then press
the ENTER button.
3
Press the number buttons to
enter your current 4-digit pin
number.
(The default pin number for
a new TV set is “0000”.)
The...

73
72
Special Features
How to Set up Restrictions Using the “MPAA Rating”The Movie rating system uses the “MPAA” (Motion Picture Association of America) system, and its
main application is for movies.
When the rating controls is on, the TV will automatically block any programs that are coded with
objectionable ratings (either “MPAA Rating” or “TV Parental Guidelines”).
1
Press the MENU button.
Press the 
…
or 
†
button to
select “Setup”, then press the
ENTER button.
2
Press the 
…
or 
†
button to
select...

75
Special Features
74
Viewing Closed Caption InformationYour TV decodes and displays the closed captions information that is broadcast along with some
television shows. These captions are usually subtitles for the hearing impaired or translations into
other languages. All VCRs record the closed caption signal from television programs, so pre-
recorded video tapes can also deliver closed-caption information. Check for the closed caption
symbol ( ) on the tape’s package or your TV program-schedule.
1...

Setting the Blue Screen ModeIf no signal is being received or the signal is very weak, a blue screen automatically replaces the
noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue
Screen” mode to “Off”.
77
Special Features
76
1
Press the MENU button.
Press the 
…
or 
†
button to
select “Setup”, then press
the ENTER button.
2
Press the 
…
or 
†
button to
select “Blue Screen”, then
press the ENTER button.
3
Press the 
…
or 
†
button to
select “On” or “Off”,...

PC Display
Using the Color Weakness Enhancement FeatureThis feature adjusts the Red, Blue or Green color to enhance the picture according to the users
particular color weakness.
78
Special Features
1
Press the MENU button.
Press the 
…
or 
†
button to
select “Setup”, then press
the ENTER button.
2
Press the 
…
or 
†
button to
select “Color Weakness”,
then press the ENTER button.
3
Press the ENTER button to
select “Color Weakness”.
Press the 
…
or 
†
button to
select “On”, then press the
ENTER button.
4...