Samsung HL P4674W DLP TV User Manual

HL-P4674W
DLPTV
This device is a Class B digital apparatus.
INSTRUCTION MANUAL
BP68-00423A-00(cover)  9/2/04  4:51 PM  Page 3 

Your New Wide TV ............................................................................................6
Replacing the Lamp ................................................................................................6
List of Features .......................................................................................................8
Accessories ...........................................................................................................8
Side Panel Buttons...

Special Features ...............................................................................................46
Customizing Your Remote Control ..........................................................................46
Remote Control Codes ..........................................................................................47
Fine Tuning Channels ...........................................................................................48
LNA (Low Noise Amplifier)...

SAMSUNG
BP68-00423A-00(02~13)  9/2/04  4:08 PM  Page 4 

Your New Wide TV
BP68-00423A-00(02~13)  9/2/04  4:08 PM  Page 5 

Your New Wide TV
English - 6
Replacing the Lamp
•Why do I need to replace the lamp?
The lamp used in a projection TV has a limited lifespan. For the best screen quality it needs to be
replaced periodically. After replacing the lamp, the screen quality will be bright and clear as new.
•When do I need to replace it?
It should be replaced when the screen becomes darker, less clear or when all three LEDs on the front
(TIMER, LAMP, & STAND BY/TEMP) are flashing.
•Check before lamp replacement 
1. The lamp...

• For replacement, you will need a 5.91 Inches-long Phillips screwdriver and a pair of gloves. 
1
Unplug TV, then use a screwdriver
to remove the screw as shown in 
the picture.
(Remove the rubber cap and 
unscrew the screw. )
2
Remove the Lamp cover.  
(Exert a bit of force to the right 
and pull for easy opening.)
3
Use a screwdriver to remove the
screws securing the Lamp. 
There are 2 screws: one on the 
left and one on the right. When 
the screws have been completely 
unfastened, they will still be...

English - 8
List of Features
Your TV was designed and engineered using the latest technology. It is a full-featured, high-performance
unit that exceeds industry standards. In addition, it has these special features:
• Easy-to-operate remote control
• Easy-to-use on-screen menu system you can access from the side panel or remote control
• Automatic timer to turn the TV on and off at any time you choose
• Adjustable picture and sound settings and the ability to memorize your favorite settings
• Automatic...

English - 9
Side Panel Buttons
The buttons on the right side panel control your TV’s basic features, including the on-screen menu
system. To use the more advanced features, you must use the remote control.
ŒSOURCEPress to switch between viewing TV programs and signals from connected components.
´MENUPress to see the on-screen menu.
ˇ+ VOL –Press to lower or raise the volume and to select items when using the on-screen menu.
¨CH Press to change channels and move between items on the on-screen menu.
ˆPress...

Your New Wide TV
English - 10
Front Panel LED Indicators 
The three lights on the front panel indicate the status of your TV. 
Indicator Light Key
: Light is On
: Light is Blinking
: Light is Off
•  It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately.
•  The TV has a fan to keep the inside lamp from overheating. You’ll occasionally hear it working.
TIMER
Standby state.
The picture will automatically appear in about 15 seconds.
Auto Timer ON/OFF has been set...