Samsung Gear VR 2016 User Manual

							   
 
    
 
 
 
     
N

ote: Ensure that the connector is fully inserted into the mobile 
device’s USB port. The device makes a sound when properly 
connected. 
Caution: Do not forcefully insert the connector into the mobile 
device as this may damage the connector. Improper installation can 
scratch the mobile device. 
4.	  Insert the mobile device into the center of the Gear VR and gently 
push the mobile device until it 
locks into place (2). The device holder (right) will return to the 
previous position and hold the mobile device (3). The mobile 
device will emit a sound when it is connected to the Gear VR 
properly. 
Caution: If the mobile device is not securely locked, the mobile 
device may accidentally separate from the Gear VR and be damaged. 
Do not twist or bend the Gear VR’s connector when you connect or 
disconnect the mobile device. Doing so may damage the connector. 
Getting Started 41   
						

							  
 
33 
22 
11 
5. Verify the orientation of the mobile device. 
Caution: If you insert the mobile device tilted to one side, it may 
cause discomfort. In this case, the mobile device screen will not be 
aligned properly to the lenses. 
42  
						

							   
 
   
   
C

orrectly Mounted 
Alignment 
Device Holder (right) 
Tabs 
N

ote: Verify that your device volume is not set to silent. If the sound 
is not emitted when you insert the connector into the mobile device, 
the Gear VR did not recognize the connection. Carefully reconnect 
the mobile device until you hear the sound. 
Caution: Do not leave the Gear VR in direct sunlight. Exposure to 
direct sunlight can damage the Gear VR and the connected mobile 
device. 
Getting Started  43  
						

							   
   
 
     
 
     
   
 
   
Installing Gear VR Software 
You must install the Gear VR software in order to use the Gear VR. 
When you connect the mobile device to the Gear VR for the �rst time, 
the set up process automatically begins. 
Note: Connect your mobile device to an active cellular network or 
Wi-Fi connection before performing the setup process. 
1.	 If using the device for the �rst time, go to www�oculus�com to 
create an account and follow the onscreen prompts. 
2.	  Unlock your mobile device and turn up the volume. 
3.	  Carefully install the compatible mobile device into the Gear VR 
compartment. 
Important: If the mobile device is not connected properly, you are 
not prompted to continue with the set up process. 
4.	  At the voice prompt, separate the mobile device from the 
Gear VR. 
5.	  Tap  START  on the Welcome! screen and follow the prompts. 
44  
						

							   
 
 
   
   
 
    
   
 
    
6.	 
Read and agree to the health and safety warnings, and the terms 
and conditions in the End User License Agreement (EULA), and 
then tap  NEXT > IN S TA L L . 
Note: During this initial process, you might be prompted to install 
additional software or update your mobile device �rmware. 
7.	  When prompted, tap  Sign In and enter your previously created 
email and password. 
8.	  Follow the onscreen prompts to con�gure your account. 
9.	  When the software is installed, the Oculus app will appear on the 
Apps screen of the mobile device. 
10.  Reconnect your mobile device to the Gear VR and place the 
Gear VR on your head. 
Note: If the screen appears tilted or skewed while using the 
Gear VR, take it off and then place the Gear VR on a �at surface. 
Wait 5-7 seconds before using it again. Getting Started  45  
						

							  
 
 
 
 
 
 
 
 
  
 
Completing the Set Up Process 
1.  Con�rm the mobile device is securely mounted into the Gear VR. 
2.	  Read the displayed  Health & Safety Warning! information and 
then use your head to position the onscreen Pointer (crosshair) 
into the Oculus logo area to continue. 
3.  Follow the prompts to learn how to: 
• Position the cursor at desired locations. 
• Use the Touchpad to make selections. 
• Swipe forward and backward using the Touchpad. 
• Swipe up and down. 
• Use the VR’s   Back key to return to a previous selection. 
• Press and hold the   Back key to access the Universal 
menu. 
Press the   Back key again to exit. 
46  
						

							   
   
   
    
  
  
 
This menu contains items such as: Oculus Home, Passthrough 
Camera, Reorient, Volume, and Brightness. 
• A proximity sensor inside the Gear VR detects the position of your 
face. When you wear the Gear VR, the screen will unlock and you 
can then use the touchpad. 
• The 3D viewing experience may vary depending on your visual 
acuity. 
• Unlock your mobile device before using the Gear VR. 
• If the screen appears tilted or skewed while using the Gear VR, 
take it off. Then, place the Gear VR on a �at surface with the 
lenses facing forwards and the Focus adjustment wheel at the top. 
Wait 5–7 seconds before using it again. 
Getting Started 
4

7  
						

							    
 
 
    
     
     
 
 
   
Wearing the Gear VR 
1.	 Align your face and the foam cushion and put on the Gear VR. 
Caution: Do not walk or drive while 
wearing the Gear VR. Always be aware 
of your surroundings while using the 
Gear VR to avoid injury to yourself or 
others. 
2.	  Secure the Gear VR to your head 
with the straps and place it 
comfortably over your face. 
3.	 Adjust the length of the top head 
strap and the main strap. 
Note: The foam cushioning may get dirty and cause the foam 
cushioning to deteriorate. Ensure that you keep your face clean and 
dry when wearing the Gear VR. If the screen shifts to the left or right, 
check if the device holder is in the correct position. 
48  
						

							   
 
 
   
   
 
Connecting a Headset 
You can connect a headset or a Bluetooth headset to the mobile 
device when using the Gear VR. 
Note: Some audio jacks on headphones/earbuds may not �t properly 
in your mobile device while mounted to the Gear VR.  If this is the 
case, do not force the connector into the mobile device as this may 
cause damage. 
►

	 
T
 o use a headset or a Bluetooth headset while using the Gear VR, 
connect it to your mobile device before connecting the mobile 
device to the Gear VR. Headsets and Bluetooth headsets are sold 
separately. 
Getting Started  49  
						

							 
 
 
Removing the Mobile Device 
Remove the mobile device from the Gear VR when not in use. 
1.	  Remove the protective cover (that aids in securing the mobile 
device). 
2.	  Carefully pull the device holder (right) outward (1), remove the 
connected mobile device (2) by carefully sliding it outwards at an 
angle, and then replace the front cover. 
50