Samsung E715 User Guide
Have a look at the manual Samsung E715 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Camera 77 Camera Using the camera module built in your phone, you can take pictures of people or events while on the move. Additionally, you can send photos to other people in a picture message. The camera produces JPG pictures. Take and Send This menu provides the option to take a picture to send the photo as a picture message to other destinations. Taking a Picture to Send a Message Note: When you take a picture in direct sunlight or under too bright illumination, shading may occur on the picture. 1. Accessing the Take and Send menu turns on the camera at the front of the phone’s outer display. You can see the picture to be captured on the display. 2. Adjusting the image and aiming it to the subject: OUse the Left and Right keys to adjust the brightness of the image. OUse the Volume keys on the left side of the phone to zoom in and out from the image. OTo use the camera options, press the left soft key. For details, see page 78. 3. If lighting is poor and a flash is required, select the right soft key to toggle the flash on and off. 4. Press the Camera soft key on the right side of the phone or the the to take the picture. 5. Press the Save soft key. 6. When you press the Next soft key after saving a picture, the following options are available: e715.book Page 77 Thursday, October 2, 2003 7:53 PM
Camera 78 Send: allows you to send the picture using a multimedia message. Set as Wallpaper: allows you to set the picture as your wallpaper for the idle screen. Set as Caller ID: allows you to assign the picture to a number as that number’s caller ID image. Protection: allows you to set the picture not to be deleted.Delete this: deletes the picture.Rename: allows you to rename the picture title. Properties: shows the properties about the picture with the thumbnail image. Using the Camera options In the capture mode, you can use various options by pressing the Opt soft key. The following options are available:Effects: allows you to change the color tone or apply special effects to the picture. When you select an option, the display shows your setting and prompts you to confirm it. Press the Select soft key. Frames: allows you to use the frame. Select a frame from the list. Move the frame to your selection and press the Select soft key to use it. Multi-shot: allows you to take action stills. Select High Speed or Normal Speed to use this option. When you press the soft key, the camera takes up to six, nine, fifteen pictures successively depending on the option you’ve selected. Rotation: rotates the picture. You can reverse the picture as a mirror image or flip the picture vertically. Self Timer: allows you to have a delay time. Select the length of time you want from either three, five and ten seconds. When you press the soft key, the camera takes the picture after a specified time. Settings: allows you the following two options: e715.book Page 78 Thursday, October 2, 2003 7:53 PM
Camera 79 Photo Size: allows you to select a picture size. The higher the value, the higher the image quality and larger the file size. Available photo sizes are: VGA(640X480); QVGA(320X240); QQVGA(160X120); and Mobile (128x120). Photo Quality: allows you to change the image quality. You may choose from Ecomony, Normal, Fine and Super Fine. My Photos This menu allows you to review your pictures. When you access this menu, the display shows the latest pictures on the full screen. Use the Left and Right keys to scroll through the pictures. To change the view mode, press the right soft key, labeled with the following modes:View: shows a picture on the full screen.Multi: shows six thumbnails on one screen. Note: Once you have changed the view mode, it is saved for the next access. Press the Options soft key to use the following options:Send: allows you to send the photo as a multimedia message. Set as Wallpaper: allows you to set the picture as your wallpaper for the idle screen. Set as Caller ID: allows you to assign the picture to a number as that number’s caller ID image. Protection: allows you to set the picture not to be deleted.Delete this: deletes the picture. Delete all: funtionality currently not supported.Rename: allows you to change the name of the picture. Properties: shows the properties of the picture, such as date and time it was taken, file size, image size, protection status, file format and file name. e715.book Page 79 Thursday, October 2, 2003 7:53 PM
Camera 80 My Album This option provides the ability for you to store your pictures using the t-zone browser. When a picture is taken and you have selected the Save soft key; you are prompted with the option to select Next or NewPhoto. Use the following procedures to send a picture to your album: 1. Select Next to go to the Photo Menu. 2. Select 1 or Send to name the picture and then press the OK soft key. 3. Select option 2 or Send to My Album. The Picture Messages screen is displayed and your picture is stored in the Picture Outbox and sent to your album. My Journal This option provides the ability for you to post your multimedia content to the Internet. When a picture is taken and you have selected the Save soft key; you are prompted with the option to select Next or NewPhoto. Use the following procedures to send a picture to your journal: 1. Select Next to go to the Photo Menu. 2. Select 1 or Send to name the picture and then press the OK soft key. 3. Select option 3 or Send to My Journal. The Picture Messages screen is displayed and your picture is sent to your journal and is also stored in the Picture Outbox. Memory Status The Memory Status screen displays the Total, Free and Used photo memory. e715.book Page 80 Thursday, October 2, 2003 7:53 PM
Sound Settings 81 Sound Settings You can use the Sound Settings feature to customize various settings, such as the: ORing melody, volume and type OSounds made when you press a key, make an error or receive a message Note: When the phone is in the Silent mode (see page 31), you cannot change the sound settings. Ring Tone This option allows you to select the required ring melody. You can choose between many different melodies. Each time you select a melody, it is played for a few seconds. If you have downloaded any sounds from the Internet or received any ring tone messages, you can view the list in this menu. Ring Volume This option allows you to adjust the ring volume to one of five levels. Use the Up and Down keys on the left side of the phone. Alert Type This option allows you to specify how you are to be informed of any incoming calls. The following options are available. Light Only: only the backlight is switched on; the phone neither rings nor vibrates. Melody: the phone rings using the ring melody selected via the Ring Tone menu option. Vibration: the phone vibrates but does not ring. Vibra+Melody: the phone first vibrates three times and then starts ringing. e715.book Page 81 Thursday, October 2, 2003 7:53 PM
Sound Settings 82 Keypad Tone This option allows you to select the tone that the keypad generates when you press a key. The following options are available.Off: the keys do not make any sound.Cool: each key, when pressed, makes the same sound but is a different tone from the Beep option. Piano: each key, when pressed, plays the piano melody.Tone: each key, when pressed, makes a different sound. Beep: each key, when pressed, makes the same sound. Message Tone This option allows you to select how the phone informs you that a new message has been received. SMS Tone This option allows you to select how the phone informs you that a new SMS message has been received. The following options are available.SMS Tone1~10: the phone uses an SMS tone. You are provided with ten SMS tones. OFF: the phone does not use the SMS tone.Light Only: the service light at the top of the phone flashes. Vibration: the phone vibrates.Single Beep: the phone beeps once. SMS CB Tone* This option allows you to select how the phone informs you that a new cell broadcast (CB) message has been received. The following options are available.OFF: the phone does not use the CB tone. Light Only: the service light at the top of the phone flashes.Vibration: the phone vibrates. e715.book Page 82 Thursday, October 2, 2003 7:53 PM
Sound Settings 83 Single Beep: the phone beeps once. SMS CB Tone1~10: the phone uses a CB tone. You are provided with ten CB tones. *This option is available only if supported by your SIM card. Multi-Media Messaging Service (MMS) Tone This option allows you to select how the phone informs you that MMS message has been received. The following options are available. OFF: the phone does not use the MMS tone.Light Only: the service light on the front of the phone flashes. Vibration: the phone vibrates.Single Beep: the phone beeps once. MMS Tone1~10: You are provided with ten MMS tones. *This option is available only if supported by your SIM card. Folder Tone T h i s o pt ion a l low s yo u to se le c t a to n e t h a t s ou n ds wh en yo u open or close the phone. The following options are available: Off, Future or Crystal. Power On/Off Use this option to chose the sound you prefer when turning your phone on or off. The following options available: Off, Classical, and Cheerful. e715.book Page 83 Thursday, October 2, 2003 7:53 PM
Sound Settings 84 Extra Tones You can customize various other tones used by the phone. The following options are available. Error Tone: sets whether the phone informs you that you have made a mistake or not. Minute Minder: sets whether the phone must beep every minute during an outgoing call to keep you informed of the length of your call. Connect Tone: sets your phone to beep when the person you are calling answers the phone. To turn a given tone...Then press the... OnOn soft key.A check mark is displayed in front of the option. OffOff soft key again.The check mark is no longer displayed. e715.book Page 84 Thursday, October 2, 2003 7:53 PM
Phone Settings 85 Phone Settings Many different features of your phone can be customized to suit your preferences. All of these features are accessed via the Phone Settings menu. Infrared Activate This feature allows you to send or receive data through the infrared port. To use an infrared connection, you must: Oconfigure and activate an IrDA-compliant infrared port on your PC. Oactivate the infrared feature on the phone; the IrDA icon appears on the top line of the display. Oalign the IrDA port on the phone with the IrDA port on your computer. The connection is ready for data transmission. If there is no communication between your phone and the IrDA-compliant device within 30 seconds of activating the feature, it is automatically deactivated. Note: For the best performance, use the data link cable supplied in your SGH-e715 kit. e715.book Page 85 Thursday, October 2, 2003 7:53 PM
Phone Settings 86 Display Settings You can change the background image and the color of the components in the display according to your preference. Wallpaper This option allows you to change the background image (wallpaper) to be displayed in idle mode. To change the background image, proceed as follows. 1. Scroll through the list by pressing the Up or Down key. You have various preset images available. You can also select the blank background and any images downloaded from the Internet. 2. Press the Select soft key when the required image is highlighted. The selected image is displayed. 3. After viewing the image, press the Select soft key to display it on the idle screen. To c h a n g e t h e Text Color, scroll through the list by pressing the Up or Down key. Select the color desired and press the Select soft key. Menu Style This option allows you to select the menu display style. You can choose between Bar Style and Page Style. 1. Adjust the contrast by using the Up and Down keys or the keys on the left side of the phone. 2. When you are satisfied, press the OK soft key to save the selection. e715.book Page 86 Thursday, October 2, 2003 7:53 PM