Samsung E715 User Guide

							Call Functions 
27
Adjusting the Volume
During a call, if you want to adjust the earpiece volume, use the 
arrow keys on the left side of the phone. Press the UP key to 
increase and the 
DOWN key to decrease the volume.
Answering a Call
When you receive a call, the phone rings and shows the 
incoming call animation. 
If the caller’s phone number or name, is stored in your 
phonebook, the caller name and number is displayed.
1. Open the phone and press the  key or the Accept soft key to answer the incoming call.
2. If the Anykey Answer option in the Extra Settings menu  is 
checked, you can press any key to answer a call except for the  
 key and the Reject soft key.
If the Active Folder option in the Extra Settings is checked, 
you can answer the call simply by opening the phone.
Note: You can answer a call while using the phonebook or menu 
features.
Viewing Missed Calls
If you are unable to answer a call, you can find out who was 
calling you, provided that this service is available. This option 
provides the ability to return the call. The number of missed 
calls is displayed on the idle screen immediately after a call was 
missed.
To view the missed call immediately
1. Press the View soft key.
e715.book  Page 27  Thursday, October 2, 2003  7:53 PM 
						

							C a l l  F u n c t i o n s                                                                                        
 28
2. The number corresponding to the most recent missed call is 
displayed, if available.
Editing a Missed Call Number
Note: If the number corresponding to the missed call is not available, 
the Edit Number option is not displayed.
1. Press the Options soft key.
2. Press the Up or Down key to highlight the Edit option.
3. Press the Select soft key.
4. Change the number as required. Press the Save soft key. If no 
change is required press the Exit soft key.
To....Then press the...
Scroll through the missed 
callsUp or Down key.
Call the number displayed key.
Edit or delete a missed call 
numberSelect soft key 
To...Then press the...
Call the number key.
Store the numberSave soft key and enter the name and 
location required (for further details, 
refer to 
page 33).
e715.book  Page 28  Thursday, October 2, 2003  7:53 PM 
						

							Call Functions 
29
Deleting a Missed Call
1. Press the Options soft key.
2. If necessary, press the Up or Down  key to highlight the Delete 
option.
3. Press the Select soft key to go to the Options menu.
You can press the  key at any time to exit the Missed 
Call feature.
Note: You can access the Missed Call feature at any time by selecting 
the Missed Calls menu option (Menu 3.1).
Switching Quickly to the Silent Mode
The Silent Mode is convenient when discretion is required and 
you a wish to stop the phone from making any noise, in a 
theater for example. 
In idle mode, to switch your phone quickly to the silent mode, 
simply press and hold down the # key until the “Silent Mode” 
message and vibration icon 
 are displayed.
In the silent mode, your phone changes the sound settings as 
follows.
Note: If you have your phone in silent mode when you turn it off, it 
will be in silent mode when you turn it on again.
OptionNew Setting
Alert Type (Menu 5.3)Vibration
Keypad Tone (Menu 5.4)Off
Message Tone (Menu 5.5)Vibration
Folder Tone (Menu 5.6)Off
Extra Tones (Menu 5.8)Off
e715.book  Page 29  Thursday, October 2, 2003  7:53 PM 
						

							C a l l  F u n c t i o n s                                                                                        
 30
To exit the silent mode and reactivate the previous Sound 
Settings, press and hold the # key again until “Exit Silent 
Mode” appears. The vibration icon () is no longer displayed.
e715.book  Page 30  Thursday, October 2, 2003  7:53 PM 
						

							Selecting Functions and Options 
31
Selecting Functions and 
Options
Your phone offers a set of functions that allow you to customize 
your phone. These functions are arranged in menus and sub-
menus, accessed via the two soft keys marked 
 and . Each 
menu and sub-menu allows you to view and alter the settings of 
a particular function.
The roles of the soft keys vary according to the current context; 
the label on the bottom line of the display screen just above 
each key indicates its current role.
To view the various functions/options available and select the 
one required, proceed as follows.
1. Press the appropriate soft key.
In some functions, you may be asked for a password or PIN. 
Enter the required code and press the OK soft key.
To...Then press the...
Select the:• Function displayed or• Option highlighted
Select soft key or the Right 
Arrow key.
View the next function or 
highlight the next option in a 
listDown key on the left side of 
the phone. 
Move back to the previous 
function or option in a listUp key on the left side of the 
phone. 
Move back up one level in the 
structureLeft key,  soft key or   key.
Exit the structure without 
changing the settings key.
e715.book  Page 31  Thursday, October 2, 2003  7:53 PM 
						

							S e l e c t i n g  F u n c t i o n s  a n d  O p t i o n s                                                                                        
 32
Setting the Display Language
1. When the idle screen is displayed, press the Menu soft key to 
access the menus.
2. Scroll through the menus until you reach the Phone Settings 
menu, by pressing the Up or Down  key.
3. To select the Phone Settings menu, press the Select soft key 
or the
  key.
Note: If the menu name is too long for the display, it will scroll when 
highlighted.
4. Scroll through the sub-menus until you reach the Language 
sub-menu, by pressing the Up or Down key.
5. To view the languages available, press the Select soft key or 
the
  key. The current setting is highlighted.
6. Scroll through the list of languages until the appropriate one is 
highlighted, by pressing the Up or Down key.
7. Press the Select soft key or the  key to confirm your 
selection.
8. Press the  or Left key twice to exit the menu structure.
e715.book  Page 32  Thursday, October 2, 2003  7:53 PM 
						

							Phonebook 
33
Phonebook
You can store phone numbers and their corresponding names in 
the memory of your SIM card. In addition, you can store up to 
1000 numbers in the phone memory. The SIM card and phone 
memories, although physically separate, are used as if they 
were a single entity, called the phonebook.
Storing a Number with a Name
There are two ways to store a number: 
 OUsing the Save soft key in idle mode  OUsing the New Entry option in the Phonebook menu
Storing a Number in Idle mode
As soon as you start to enter a number, Save appears above 
the left soft key to allow you to store the number in the 
phonebook.
1. Key in the number to be stored.
Note: If you make a mistake while entering a number, correct it 
using the  key. For further details, refer to page 25.
2. When you are sure that it is correct, press the Save soft key.
3. Select an entry type to identify the category of number to be 
stored. Three categories are available:
 OMobile Number OWo r k  N u m b e r   OHome Number
4. To select the category, press the Up or Down key, followed by 
the Select soft key.
5. Select the memory location (SIM or Phone).
6. Enter a name and press the OK soft key. 
The maximum length of a name depends on your SIM card. 
For information on how to enter characters, see page 41.
e715.book  Page 33  Thursday, October 2, 2003  7:53 PM 
						

							P h o n e b o o k                                                                                        
 34
The phone now displays the first free location in the last 
memory used to save a number and name. If that memory 
is full, the first free location in the other memory is 
displayed.
Note: If you change phones, any numbers stored in your SIM card 
memory will automatically be available with the new phone, whereas 
any numbers stored in the phone memory must be restored.
7. If you do not want to save the number and name in the 
suggested location, press the
  key to clear the location number and enter your preferred location by pressing the 
number keys.
8. Press the OK soft key to store the name and number.
9. After storing, the phone displays the phonebook entry or name 
just created.
Storing a Number Using the Phonebook Menu
1. When the idle screen is displayed, press the Ph.Book soft key. 
2. Scroll to New Entry by pressing the 2 or Down key and press 
the Select soft key.
3. Select an Entry Type to identify the category of the number to be 
stored.  The following four options are provided:
 OMobile Number OWo r k  N u m b e r OHome Number OE-mail Address
Note: The E-mail address option is available in this step. It allows 
you to save an E-mail address instead of a phone number.
4. Continue the procedure from Step 4 on page 33 to store the number.
To...Then press the...
Use the entry optionsOptions soft key.
Return to the idle screen key.
e715.book  Page 34  Thursday, October 2, 2003  7:53 PM 
						

							Phonebook 
35
Using Phonebook Entry Options
While accessing any phonebook entry, press the Options soft 
key to access the options for the entry.
The following options are available. OPaste: allows you to paste the selected number into the normal 
dialing mode. Use this option to dial a number similar to one in 
the phonebook, a different extension in the same office, for 
example.Use the
  key to change the number as required; refer to page 25 for further details. When you are ready to dial, 
press the  key.
 OEdit: allows you to edit One Entry or All Entry. Select the 
name and number and press the Select soft key.
 OPhoto Caller ID: allows you to select a picture that you have 
taken to display when the assigned caller is phoning you.
 ODelete: allows you to erase the selected name and number 
from the phonebook. You are asked to confirm that you wish to 
erase the name and number by pressing the Yes soft key.
 OCopy: allows you to copy the selected number to another 
location. Use this option to store a number similar to one 
already in memory; once copied, edit the number and store it in 
the phonebook.
 OCaller Group: allows you to assign the entry to a caller group 
so that the phone alerts you in a particular way when the 
corresponding person calls you. Select one of the ten groups 
available. To remove an entry from a group, select the No Group 
option. For more information on how to change caller group 
properties, see 
page 37. OAdd Entry: allows you to add a new number in a different 
category (mobile, work, home or E-mail) to the currently 
selected name. A phonebook entry or name can contain up to 
four numbers, one in each category.
To...Then press the...
Select the highlighted optionSelect soft key or the Right key.
Highlight a different optionUp or Down key until the 
required option is highlighted.
e715.book  Page 35  Thursday, October 2, 2003  7:53 PM 
						

							P h o n e b o o k                                                                                        
 36
Searching for and Dialing a Number in 
the Phonebook
After storing numbers in the phonebook, you can search for 
them in two ways: by name and by caller group.
Searching for a Number by Name
1. When the idle screen is displayed, press the Ph.Book soft key. 
When Search is highlighted, press the Select soft key. You are 
asked to enter a name.
2. Enter the first few letters of the name that you wish to find.
3. The phonebook entries are listed, starting with the first entry 
matching your input. This entry is also highlighted.
4. Once you have found the required entry, press the  key to 
dial the number, or press the Options soft key to access the 
phonebook entry options; for further details, see page 35.
To...Then press the...
View the highlighted 
entryView soft key.
Select a different entryUp or Down key until the required 
entry is highlighted.
Look for a name starting 
with a different letterTo clear previously entered text, 
press the  Key labeled with the required letter. 
e715.book  Page 36  Thursday, October 2, 2003  7:53 PM