Samsung DLPTV HLN467w User Manual

61
Special Features
60
BBEBBE is a built-in effect that adds clarity, punch and dynamics to the sound.
1
Press the Menu button. Move
the joystick down to select 
SOUND, then press the 
joystick to enter.
2
Move the joystick down to
select BBE.
3
Move the joystick to the right
or left to select “On”or “Off”.
4
Press the Menu button to exit.
NOTE•Dolby Virtual and BBE cant be set ON at the same time.
Dolby VirtualThis feature allows the TV’s L/R speakers to provide a home Theater-like Dolby effect.
The...

63
Special Features
62
Viewing Closed Caption InformationYour TV decodes and displays the closed captions information that is broadcast along with some
television shows. These captions are usually subtitles for the hearing impaired or translations into
other languages. All VCRs record the closed caption signal from television programs, so pre-
recorded video tapes can also deliver closed-caption information. Check for the closed caption
symbol ( ) on the tape’s package or your TV program-schedule.
Closed...

65
Special Features
64
Selecting an External SignalYou can use PIP to view a signal from an external source, such as a VCR.
1
Press the Menu button. Move
the joystick down to select
PIP, then press the joystick to
enter. Quick way to access PIP
source:  Just press “Source” on
the remote control. 
2
Move the joystick down to
select “Source”.
3
Move the joystick right or left
to select an external signal.
You can choose between
“TV”, “Video 1~3”, or 
“S-Video 1~3”.                  
The signal from these...

67
Special Features
66
Swapping the Contents of the PIP and Main image
1
Press the Menu button. Move
the joystick down to select
PIP, then press the joystick to
enter. Quick way to access PIP
Swap:  Just press “Swap” on
the remote control. 
2
Move the joystick down to
select “Swap”.
3
Move the joystick to the right or
left.
The channel in the PIP image will
appear in the main image, and
vice versa.
4
Press Menu to exit.
NOTE•When ANT-B, Component mode, PC, or DVI is selected, the PIP Swap function...

69
68
Changing the Picture-in-Picture ChannelAfter you set the PIP signal source (antenna or cable), it is easy to change channels.
1
Press the Menu button. Move
the joystick down to select
PIP, then press the joystick to
enter. Quick way to access PIP
channel: Just press “PIP CH
(,)” on the remote control. 
2
Move the joystick down to
select “Channel”.
3
Move the joystick to the right
or left to change the channel
of the PIP image. 
4
Press Menu to exit.
NOTE•The PIP channels are not available when RF...

71
70
Using the V-ChipThe V-Chip feature automatically locks out programming that is deemed inappropriate for chil-
dren.
The user must first enter a PIN (personal ID number) before any of the V-Chip restrictions can be
set up or changed. 
Note: The V-chip doesn’t function when the Picture-in-Picture is active.  Setting Up Your Personal ID Number (PIN)
1
Press the Menu button.  Move
the joystick down to select
SETUP, then press the joystick
to enter.
Quick way to access the
V-chip: Just press “V-chip”...

73
72
3
The “TV guidelines” screen will appear.
Move the joystick up or down to highlight
one of the six age-based categories:
TV-Y Young children                  
TV-Y7 Children 7 and over           
TV-G General audience             
TV-PG Parental guidance            
TV-14 Viewers 14 and over         
TV-MA Mature audience 
Note: These categories consist of two separate groups: TV-Y and TV-Y7 (young children
through age 7), and  TV-G through TV-MA (everybody else). The restrictions for these two...

75
74
3
The “MPAA Ratings” screen will appear.
4
Repeatedly move the joystick
down to highlight a particular MPAA 
category.                               
The MPAA categories are as follows.
G General audience (no restrictions).       
PG Parental guidance suggested.
PG-13 PG-13 (Parents strongly cautioned).            
R R (Restricted.  Children under 17 should be 
accompanied by an adult).                          
NC-17 No children under age 17.                         
X X (Adults only)....

PC Display
SAMSUNG 

PC Display
7879
Using Your TV as a Computer (PC) DisplayHow to connect Your PC to the TVNote: This figure shows the Standard Connector-jack panel. The actual configuration on your TV
may be different, depending on the model.NOTEJack RS232C is for repair and software upgrade.
How to Set up Your PC Software (Windows only)The Windows display-settings for a typical computer are shown below. The actual screens on your
PC will probably be different, depending upon your particular version of Windows and your...