Samsung DLPTV HLN467w User Manual

2021
Connections
Connecting VHF and UHF AntennasIf you do not have a cable system, you will need to connect an antenna to your TV.  Antennas with 300-ohm Flat Twin LeadsIf your antenna looks like this:                           it has 300-ohm flat twin leads.1
Place the wires from the twin
leads under the screws on the
300-75 ohm adapter. Use a
screwdriver to tighten the
screws.
2
Plug the adapter into the
ANT-A terminal on the back
panel of the TV.
Antennas with 75-ohm Round LeadsIf your antenna looks...

23
Connections
22
Connecting Cable TV and VCRYou can connect different cable systems to your TV, including cable without a cable box, and
cable with a cable box that descrambles some or all channels.Cable without a Cable BoxIf you want to connect cable, and you do not need to use a cable box:1
Plug the incoming cable
into the ANT-A antenna ter-
minal on the back of the
TV.
Cable with a Cable Box that Descrambles All Channels1
Find the cable that is con-
nected to the ANTENNA
OUT terminal on your
cable...

Connecting a DVD PlayerThe rear panel jacks on your TV make it easy to connect a DVD player to your TV.Connecting to Y,P
b,Pr
1
Connect a set of audio
cables between the
Component1AUDIO IN
jacks on the TV and the
AUDIO OUT jacks on the
DVD player.
2
To enable Component video
viewing, connect video
cables between the
Component1 (Y, P
band P
r)
jacks on the TV and Y, Pb
and P
r(or Y, C
b, Cr) output
jacks on the DVD player.
Note: For an explanation of
Component video, see your
DVD players owners man-
ual....

Connecting a DTV Set Top BoxConnecting to Y,P
b,Pr
1
Connect a set of audio
cables between the
Component2 or
Component3 AUDIO IN
jacks on the TV and the
AUDIO OUT jacks on the
Set Top Box.
2
Connect video cables
between the Component2
or Component3 Y, P
band P
r
inputs on the TV and Y, P
b
and P
r(or Y, C
b, Cr) outputs
on the Set Top Box.
Note: For an explanation of
Component video, see your
Set Top Box owners manu-
al.  
Connecting to DVI (Digital Visual
Interface)1
Connect a set of audio
cables...

Operation
SAMSUNG 

Operation
3031
Turning the TV On and OffPress the Power button on the remote control or on the side panel to turn your TV on and off. 
Note that audio on this product can being working before screen video.Viewing the Menus and DisplaysThe on-screen menu system allows you to control the settings of your TV. Access the on-screen menu
system by pressing the Menu button on the remote control. Once the on-screen menu appears, use
the joystick button on your remote control to move between menu items, select...

33
Operation
32
Channel MemoryYour TV can memorize and store all of the channels available. Once the channels are memorized,
you can use the CH and CH buttons to scan through the available channels.  Selecting the Broadcast SourceBefore memorizing available channels, you must select what broadcast source your TV is connect-
ed to, either an antenna or a cable system.
1
Press the Menu button. 
Move the joystick down to
select SETUP, then press the 
joystick to enter.  
2
Press the joystick to enter. The...

Selecting Your Favorite ChannelsYou can store up to ten of your favorite channels for each available input source (such as TV and
CATV). Then, when you press the Fav.CH button on the remote control, the TV displays only the
favorite channels you previously stored, allowing you to quickly and easily find frequently
watched channels. 
To Store Your Favorite Channels:1
Press the Menu button. Move
the joystick down to select 
SETUP, then press the joystick 
to enter.
2
Press the joystick to enter.
The...

Setting The On/Off MelodyYou can hear clear melody sound when the TV is powered On or Off.
1
Press the Menu button. Move
the joystick down to select 
SETUP, then press the joystick 
to enter.
2
Move the joystick down to
select Melody.
3
Move the joystick to the right
or left to select “On”.
4
Press the Menu button to exit.
37
Labeling the ChannelsUse this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,
“PBS2”, CNN1”, etc.) A label consists of four fields, where each field...

Picture ControlUsing the remote, you can change the contrast, brightness, tint, color, and sharpness settings of
the TV.
Customizing the Picture1
Press the Menu button. 
Press the joystick to enter. 
2
Move the joystick down to
select Adjust, then press the 
joystick to enter. You will see 
the items “Contrast”, 
“Brightness”, “Sharpness”, 
“Color” and “Tint”. 
3
Move the joystick up or down
to select the item you want to 
change. 
4
Move the joystick right or left
to raise or lower the value of
the...