Samsung Digimax V4000 User Manual

							READY
21
Instructions on how to use the memory card
NOTICE
If you open the memory card cover when the camera power is turned on, the power will turn
off automatically.
Don’t remove the memory card when the Autofocus indicator lamp(Green) is blinking as this
may cause damage to data in the memory card.
You can use both an SD memory card and Multi Media Card (MMC).
We recommend using the SD memory card as the Multi-Media Card need more time to stored the
image than the SD memory card.
When using a 32MB SD memory card, the specified shooting capacity will be as follows. 
(These figures are intended as an indication of expected performance).
These figures are approximate as image capacities can be affected by variables such as memory
performance and subject matter.
The SD memory card has a write protect switch that
prevents image files from being deleted or formatted. By
sliding the switch to the bottom of the SD memory card, the
data will be protected. By sliding the switch to the top of the
SD memory card, the data protection will be canceled.
Check the switch position before taking an image.
Recorded image size TIFF Super fine Fine Normal
2272X1704 (Large) 2 12 25 38
2272X1504 (Photo) 2 14 29 43
1120X840 (Medium) 8 53 106 159
544X408 (Small) 35 225 451 676
Print Memo E-mail
14 106 676
Write
protect
switch
Label  Card pins
SD(Secure Digital) memory card 
EASY mode
Downloaded From camera-usermanual.com Samsung Manuals 
						

							22
Instructions on how to use the memory card
Maintenance of the memory card
Turn off the camera power whenever the memory card is being inserted or removed.
Repeated use of the memory card will eventually reduce the memory cards performance.
Should this be the case, you will need to purchase a new memory card.
Wear and tear on the memory card is not covered by the Samsung warranty.
The memory card is an electronic precision device. Do not bend, drop or subject the memory card
to any heavy impact.
Do not store the memory card in an environment with strong electronic or magnetic fields, e.g.
near loud speakers or TV receivers.
Please do not use or store in an environment where there are extremes in temperature.
Do not allow the memory card to become dirty or to come into contact with any liquid. 
Should this happen, clean the memory card with a soft cloth.
Please keep the memory card in its case when not in use.
During and after periods of extended use, you may notice that the memory card is warm. 
This is perfectly normal.
Do not use the memory card that is used in another digital camera or memory card reader.
Do not use the memory card formatted by another digital camera or memory card reader.
Preserving the memory card data
If the memory card is subjected to any of the following, the recorded data may become corrupted :
- When the memory card is used incorrectly.
- If the power is switched off or the memory card is removed while recording, deleting (formatting)
or reading.
Samsung cannot be held responsible for lost data.
It is advisable to copy important data onto other media as back-up e.g. floppy disks, hard disks,
CD etc.
If there is insufficient memory available : 
If you press the shutter button for the shot, [CARD FULL !] message is displayed and the camera
will not operate. To optimize the amount of memory in the camera, replace the memory card or
delete unnecessary images stored on the memory.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							READY
23
Selecting the date and time
You can record the date and time with the image data in the memory card.
2. Select the [SETUP] tab by pressing the RIGHT button.
Select the [FORMAT] menu by pressing the DOWN/button. 
Press the DOWN / button again and the next menu page will be
displayed.
Press the UP or DOWN button and select [DATE SET].
3. Shift the cursor to the [DATE SET] sub menu by pressing the
RIGHT button. 1. Turn on the power and press the MENU button.
The recording mode menu will be displayed in the RECORDING mode, and the play mode menu
will be displayed in the PLAY mode. 
(There is no associated menu in VOICE RECORDING mode.)
INFORMATION
Date setting range : 2002/01/01 ~ 2050/12/31 
(Leap years and months are corrected automatically)
MOVE:
PLAY SETUP MyCAM
CHANGE:
‘04/04/01
12:00 PM
YY/MM/DD
OFFDATE SET
TIME SET
D.TYPE
IMPRINT
BACK:
PLAY SETUP MyCAM
SET:OK
DATE SET
TIME SET
D.TYPE
IMPRINTYEAR
04  /04/01
Downloaded From camera-usermanual.com Samsung Manuals 
						

							24
Selecting the date and time
6. To select the correct time, select [TIME SETUP] at step 2.
Press the MENU button again and the menu will be cancelled. 5. Press the OK button to confirm the setting.
To return to the main menu or cancel the setting, press the LEFT button.
4. Select the correct date by pressing the 5-function button. 
RIGHT button : selects YEAR/ MONTH/ DAY item.
UP or DOWN button : changes the value of each item.
NOTICE
You will need to check and select the correct Date / Time when the batteries have been
removed for a period longer than 1 hour.
BACK:
PLAY SETUP MyCAM
SET:OK
DATE SET
TIME SET
D.TYPE
IMPRINT
MOVE:
PLAY SETUP MyCAM
CHANGE:
DATE SET
TIME SET
D.TYPE
IMPRINT‘04/04/01
12:00 PM
YY/MM/DD
OFF
MONTH
04/  04  /01
Downloaded From camera-usermanual.com Samsung Manuals 
						

							READY
25
Language
There is a choice of languages that can be displayed on the LCD monitor.
INFORMATION
You can select 15 languages. Those are listed below.
English, Korean, T. Chinese, S. Chinese, Japanese, Russian, Germany, Spanish, French,
Italian, Danish, Dutch, Swedish, Finnish, Portuguese.
Even if the camera is restarted, the language setting will be maintained.
Even if the [SOUND] function is [ON], the sound will not activate in this menu.
1. Turn on the power and press the MENU button.
The recording mode menu will be displayed in RECORDING mode, and the play mode menu will be
displayed in the PLAY mode. (There is no associated menu in VOICE RECORDING mode.)
2. Select the [SETUP] tab by pressing the RIGHT button.
Press the UP or DOWN button and select [LANGUAGE].
3. Shift the cursor to the [LANGUAGE] sub menu by pressing the
RIGHT button and select the language that you want by pressing
the UP or DOWN button.
4. Press the OK button to confirm the setting.
To return to the main menu or cancel the setting, press the LEFT button.
Press the MENU button again and the menu will be cancelled.
BACK:
PLAY SETUP MyCAM
SET:OK
FILE
PWR OFF
LANGUAGE
FORMATENGLISH
EXIT:MENU
PLAY SETUP MyCAM
PAGE:
FILE
PWR OFF
LANGUAGE
FORMATSERIES
OFF
ENGLISH
NO
Downloaded From camera-usermanual.com Samsung Manuals 
						

							26
Recording mode
Downloaded From camera-usermanual.com Samsung Manuals 
						

							RECORDING
27
LCD monitor indicator
The LCD monitor displays information about the shooting functions and selections.
Image & Full Status 
No. Description Icons Page
1Recording modep.15
2Camera shake warningp.31
3Flashp.37
4Self-timer, Remotep.40
5 Voice memo p.35
6  Macro/ Super macro  p.36
Downloaded From camera-usermanual.com Samsung Manuals 
						

							28
LCD monitor indicator
No. Description Icons Page
7 Metering p.53
8 ISO  p.55
9 Exposure compensation p.44
Aperture compensation F5.6 p.44
Shutter speed compensation 1/250 p.44
10 Manual focus  p.43
11  Date / Time 2004/04/01 10:34 AM
12 White Balance  p.56
13 Sharpness p.58
14 Image quality p.50
15 Image size p.49
Continuous shot, AEB p.54
16Number of available shots remaining161
Remaining time( Movie clip/ Voice recording)00:01:40 (hour : minute : second)
17 Auto focus frame
18 Zoom / Digital Zoom p.33
19 Battery p.17
20 Aperture value F5.6 p.51
Shutter speed 1/250 p.51
Downloaded From camera-usermanual.com Samsung Manuals 
						

							29
RECORDING
Starting recording mode
1. Insert the batteries (p.17).
Insert the batteries taking note of the polarity (+ / -).
2. Insert the memory card (p.20).
3. Close the memory card cover.
4. Slide the power switch to turn on the camera.
5. Select the PROGRAM mode by rotating the mode dial.
6. 
Point the camera towards the subject and compose the image by
using either the viewfinder or LCD monitor.
7. Press the shutter button to capture an image.
[DELETE] message may be displayed after taking a picture.
Refer to p.93 for more information about [DEL. ANSWER].
Recording a still image
PROGRAM mode 
PROGRAM mode 
INFORMATION
Manner mode
Pressing the power button over 2 seconds changes the buzzer and start-up sound setting to
OFF, though you have set the settings to ON. If you wish to hear the buzzer sound and start-
up sound, set the [SOUND] and [S.SOUND] settings in the SETUP mode to ON.
There are two LED lamps (one green, one red) positioned next to the viewfinder.
- If the camera is in focus when you press the shutter button halfway, the green LED will
illuminate and you can take an image. If the camera can focus on the subject, the
autofocus frame in the center of the LCD monitor will change from white to green.
- If the red lamp illuminates, the flash can fire.
- If the red lamp blinks, the flash is being charged.
- When an image is being stored onto the memory card, the green lamp blinks slowly. When
the image data has been stored, the green LED light will go out. After the green LED light
has gone out, you can resume taking images.
NOTICE
A Blinking autofocus indicator lamp means that the camera cannot focus on the subject.
Should this be the case, the camera is unable to capture an image clearly. 
Downloaded From camera-usermanual.com Samsung Manuals 
						

							30
Starting recording mode
Recording audio
Steps from 1-4 are the same as those for recording a still image.
5. Select the VOICE RECORDING mode by rotating the mode dial.
6. Press the shutter button to record audio.
- Press the shutter button once and audio is recorded for as
long as the available recording time allows. The recording
time will be displayed on the LCD monitor.
- Audio will still be recorded if the shutter button is released.
- If you wish to stop recording, press the shutter button again.
VOICE RECORDING mode 
MOVIE CLIP mode 
MOVIE CLIP mode 
VOICE RECORDING mode 
Recording a Movie clip
Steps from 1-4 are the same as those for recording a still image.
5. Select the MOVIE CLIP mode by rotating the mode dial.
6. Point the camera towards the subject and compose the
image by using either the viewfinder or LCD monitor.
7. Press the shutter button to take a movie clip.
Press the shutter button once and movie clips are
recorded for as long as the available recording time allows.
Movie clips will still be recorded if the shutter button is
released.
If you wish to stop recording, press the shutter button again.
Image size and type are listed below.
- Image size : 288 x 208
- File type : *.AVI
INFORMATION
The available recording time may vary depending on shooting conditions and camera settings.
Downloaded From camera-usermanual.com Samsung Manuals