Samsung Digimax V4000 User Manual

							111
Setting up the application software
SOFTWARE
3. A window for which you can select application software will
be displayed. Select the application program and click the
[Install] button. 
Refer to page.109 for more information about the
application program.
4. Install Digimax Viewer. 
Click [Next >] button.
5. The Software License Agreement window will be displayed.
If you agree to this, click [Yes], the window will then move
to the next step. If you disagree, click [No] and the
installation program will be canceled.
6. A destination selection window will open. Click [Next >]. 
To copy to the files to another folder, click [Browse (R)..]
and choose a folder you want.
[Click!]
[Click!]
[Click!]
[Click!]
INFORMATION
If you select [Cancel] at step 4, a window for installing PhotoImpression will be displayed.
INFORMATION
If you select [Cancel] at step 4, a window for installing PhotoImpression will be displayed.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							112
Setting up the application software
7. A window will open, asking you to choose a folder to which
program icons will be added. Click [Next >] button. 
If you want to add the program icons to a different folder,
choose another folder, and then click [Next >] button.
[Click!]
8. Digimax Viewer Installation is completed. 
The PhotoImpression installation window will be displayed
as shown alongside. 
Click the [OK] button.
[Click!]
9. A Welcome window will be displayed.
Click the [Next >] button.
[Click!]
10. The Software License Agreement window will be
displayed. If you agree to this, click [Yes], the window will
then move to the next step. If you disagree, click [No] and
the installation program will be canceled.
[Click!]
INFORMATION
If you click [Cancel] in Step 8, the PhotoImpression installation will be canceled and the
Restart Computer window will appear.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							113
Setting up the application software
SOFTWARE
11. A destination selection window will open. Click [Next >].
To copy to the files to another folder, click [Browse...] and
choose a folder you want.
[Click!]
12. The [Select Components] window will appear. Click [Next
>] button.
[Click!]
13. A window will open, asking you to choose a folder to
which program icons will be added. Click [Next >] button. 
If you want to add the program icons to a different folder,
choose another folder, and then click [Next >] button.
[Click!]
14. Installation is complete. 
Click the [Finish] button.
[Click!]
Downloaded From camera-usermanual.com Samsung Manuals 
						

							114
Setting up the application software
15. To apply changes, you must restart the computer. 
Select [Yes, I want to restart my computer now], and then
click [OK].
16. After restarting the computer, connect the PC to the camera with the USB cable.
18. If you can see [Removable Disk] under [My computer], the
camera driver installation was successful. 
Now you can transfer image files from the camera to PC
via the USB cable.
[Click!]
17. Turn the camera power on. [Found New Hardware
Wizard] will open and the computer will recognize the
camera.
If you have ever installed an image viewer program or
your OS is Windows XP, an image viewer program will
open. 
If the image viewer program opens, the camera driver was
setup successfully.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							115
Setting up the application software
SOFTWARE
INFORMATION
If you have installed the camera driver, [Found New Hardware Wizard] may not open.
On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens and
a window asking you to select a driver file may appear. In this case, specify Digimax V4000
Driver in the CD supplied. (for Windows 98 and 98 SE).
When connecting the camera to your PC, it is recommended that you use an AC power
adapter.
Before connecting the camera to the PC, You should first install the camera driver.
After installing the camera driver, you have to restart your PC.
If you connect the camera to the PC before installing the camera driver, the [Found New
Hardware Wizard] will open.
In this case, cancel the [Found New Hardware Wizard] and disconnect the camera. Install
the camera driver and connect the camera to the PC again.
Should the computer not find the camera driver after installation, please try one or more of
the following measures.
1. Delete the camera driver (p.116), and re-install the driver.
2. Refer to FAQ (p.122) to check for a possible solution to the problem.
3. If your PC’s central processing unit is VIA chip (This is shown in the USB Host Controller),
download the patch file from the Samsung Camera web page.
(http://www.samsungcamera.com)
Downloaded From camera-usermanual.com Samsung Manuals 
						

							116
Removing the USB Driver for Windows 98SE
To remove the USB driver, refer to the process shown below.
1. Trace [Start Settings] and click [Control Panel].
[Click !]
4. Uninstallation is complete.  Click the [Finish] button and
the window will disappear.
[Click !]
2. Double-click [Add/Remove programs].
3. The [Add/Remove Programs Properties] window will
open. Click [Digimax V4000] and click the
[Add/Remove] button.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							117
SOFTWARE
Removable Disk
To use this camera as a Removable Disk, install (p.110) the USB Driver.
1. Before turning the camera power on, connect the camera to the PC with the USB cable.
2. Click [Removable Disk] under [My computer] or [Windows Explorer].
3. Image files stored in the Removable Disk (DCIM 
100SSCAM) can be transferred to the PC.
INFORMATION
Important information whilst using the Removable Disk
The [Removable Disk] indicator will not show when the camera power is off or the USB
cable is removed.
We recommend that you should copy the images to the PC to view them. Opening images
directly from the removable disk may be subject to unexpected disconnection.
When uploading images from the PC to the camera, ensure that the uploaded file names
are not the same as those already stored on the memory. 
When you upload a file that is not taken by this camera to Removable Disk, the [FILE
ERROR!] message will be displayed on the LCD monitor in the PLAY mode, and nothing is
displayed in THUMBNAIL mode.
The auto focus lamp will blink, when a file is transferred
(copy or deletion) between the PC and the camera. Do
not remove the USB cable until the lamp stops blinking.
To remove the USB cable in Windows 2000/ME/XP, use
the [Unplug or Eject Hardware] icon on the task bar.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							118
Removing the removable disk
[Click!]
[Double-click!]
[Click!]
[Click!]
Windows 98SE
1. Check whether the camera and PC are transferring a file. If the auto focus lamp blinks, you have
to wait until the lamp illuminates.
2. Unplug the USB cable.
Windows 2000/ME/XP
(The illustrations may be different from the real display in accordance with the Windows O/S.)
1. Check whether the camera and PC are transferring a file. If the auto focus lamp blinks, you have
to wait until the lamp illuminates.
2. Double-click the [Unplug or Eject Hardware] icon on
the task bar.
3. The [Unplug or Eject Hardware] window will open.
Select the [USB Mass Storage Device] and click the
[Stop] button.
4. The [Stop a Hardware device] window will open.
Select the [USB Device] and click the [OK] button.
5. A [Safe to Remove Hardware] window will open. 
Click the [OK] button.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							119
SOFTWARE
Removing the removable disk
1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera
driver.
2. Check the MAC OS. You can check the MAC OS version during MAC OS start-up. 
This camera is compatible with MAC OS 9.x ~ 10.2.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be displayed on the desktop after connecting the camera to the MAC.
Using the USB Driver for MAC
Setting up the USB Driver for MAC
1. Double click a new icon on the desktop and the folder in the memory will be displayed.
2. Select an image file and copy or move it to MAC. 6. A [Unplug or Eject Hardware] window will open. 
Click the [Close] button and the removable disk will be
removed safely.
7. Unplug the USB cable.
[Click!]
INFORMATION
If you use Mac OS 10.0 or later, you may experience an error occurring when you transfer
files from the PC to the camera.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							120
Using PhotoImpression
You can use PhotoImpression to perform the following tasks. With PhotoImpression, you can edit or store still images that you downloaded from the camera. This
software is only available in Windows version.
To start the program, click [Start 
Programs ArcSoft PhotoImpression 4 PhotoImpression4].
The following screen will appear.
[ Command Button ]
[ Tool Bar ]
Command Button
Button Description
Imports a picture from an album, a source folder, or the camera/scanner, or
captures screen shots of what is being viewed on the current monitor.
Selects Cut, Resize, Edit Image, Insert Text, Enhance Picture, Insert Effects, or
Layer.
Performs Insert Frame, Insert Borders, Insert Calendar, Insert Greeting Cards,
Insert Template, or Connect with Other Software.
Saves the edited picture, and sends an e-mail or uses it as the background image.
Outputs the edited picture according to your preferences.
[ Help Button ]
Downloaded From camera-usermanual.com Samsung Manuals