Samsung Digimax U CA501 User Manual

41
Effect
[ PROGRAM mode ][ Lightly press the shutter button ]
Photo Frame
Allows the user to adjust the R (Red), G (Green), and B (Blue) values of the images to be
captured.
Setting RGB Values
1. Select the [RGB] sub menu and then press the OK
button. The RGB menu bar will appear as shown.
2. Use the UP/ DOWN/ LEFT and RIGHT buttons to select
the desired RGB value.
- UP/ DOWN Button: Navigates between R, G, and B
icons.
- LEFT/ RIGHT Button: Changes value of each icon.
3. When you press the OK button,...

42
Photo Frame
[ FRAME 1 ] [ FRAME 2 ] [ FRAME 3 ]
[ FRAME 4 ] [ FRAME 5 ] [ FRAME 6 ]
[ FRAME 7 ] [ FRAME 8 ] [ FRAME 9 ]
You can adjust the sharpness of the picture you want to
take. You cannot check the sharpness effect on the LCD
monitor before you take a picture, because this function is
applied only when the captured image is stored on the
memory. 
[ PROGRAM mode ]
2048
SHARPNESSSOFT
NORMAL
VIVID
RGB
Sharpness
Sub menu Icon  Description 
The edges of the image are softened. 
This effect is...

43
Save / Load the camera configuration (MYSET)
[PROGRAM mode]
2048
MYSET
LOAD
SAVECANCEL
MYSET1
Use the MYSET mode to save frequently used camera settings (SAVE) and use it later
(LOAD)
Saving the camera configuration: Available in the PROGRAM mode.
1. Select the STILL IMAGE mode by sliding the mode
switch.
2. Press the MENU button and select [PROGRAM] menu.
3. Press the Left/Right buttons to select the [MYSET] menu
tap.
4. Press the UP/DOWN buttons to select the [SAVE] menu
and press the right...

44
Starting play mode
If the memory card is inserted in the camera, all the camera functions apply only to the
memory card.
If the memory card is not inserted in the camera, all the camera functions apply only to the
internal memory.
If you have turned on the camera by pressing the POWER button, you can press the PLAY
MODE button once to switch to Play mode and press it again to switch to Recording mode.
You can set up the PLAY mode function by using the camera buttons and LCD monitor.
Playing back a...

45
Starting play mode
Playing back a movie clip
Steps from 1-2 are the same as those to play back a still
image.
3. Select the recorded movie clip that you want to play back
by using the LEFT/RIGHT button. If you select a movie
clip, the movie clip indicator (        ) will be displayed on the
LCD monitor.
4. Press the play & pause button (           ) to play back a
movie clip file.
- To pause a movie clip file while playing it back, press the
play & pause button again.
- Pressing the play & pause...

46
LCD monitor indicator
SIZE : 2560X1920 Size 
AV : F3.2 Aperture value
TV : 1/18 Shutter speed
FLASH: OFF Whether or not the flash
is used. 
DATE : 2004/10/01 Recording date
SIZE : 2560X1920
AV : F3.2
TV : 1/18
FLASH : OFF
DATE : 2004/10/01
If you press the LCD button, you can check the following recording information: 
The LCD monitor displays information about the shooting conditions.
100-0009
No. Description Icon Page 
1 Battery p.14
2 Play mode
3 File Type
4 Voice memo p.48
5 Protect indicator...

47
Using the camera buttons to adjust the camera
In Play mode, you can use the buttons on the camera to conveniently set up the Play mode
functions.
Image enlargement
1. Select an image that you want to enlarge and press the enlargement button.
2. Different parts of the image can be viewed by pressing the
5 function button.
3. Pressing the thumbnail button will zoom back to the
original full sized image.
- You can tell whether the image displayed is an enlarged
view by checking the image enlargement...

48
Thumbnail(      ) / Enlargement(      ) button 
The maximum enlargement rate in proportion to the image size.
Trimming : You can extract part of the image that you want
and save it separately.
1. Select an image that you want to enlarge and press the
enlargement button.
2. Different parts of the image can be viewed by pressing
the 5 function button.
3. Press the MENU button and a message will be
displayed as shown alongside.
4. Select the submenu values by pressing the UP/DOWN
button and then press...

49
Voice (     ) memo / Up button
3. Press the shutter button to start recording and voice will
be recorded to the still image for 10 seconds. 
While the voice is recording, the recording status
window will be displayed as shown alongside.
4. The recording can be stopped by pressing the shutter
button again.
5. The (        ) icon will be displayed on the LCD monitor
after voice memo recording has finished. 
- Voice memos can’t be recorded onto movie clip files.
- A distance of 40cm between you and the...

50
LEFT/ RIGHT/ MENU/ OK button
LEFT / RIGHT/ MENU/ OK buttons activate the following.
- LEFT button : While the menu is showing, press the LEFT button to select the menu tab
to the left of the cursor.
- RIGHT button : While the menu is showing, press the RIGHT button to select the menu
tab to the right of the cursor, or to move an secondary menu.
- MENU button : When you press the MENU button, the play mode menu will be displayed
on the LCD monitor. Pressing it again will return the LCD to the initial...