Samsung Digimax U CA501 User Manual

							41
Effect
[ PROGRAM mode ][ Lightly press the shutter button ]
Photo Frame
Allows the user to adjust the R (Red), G (Green), and B (Blue) values of the images to be
captured.
Setting RGB Values
1. Select the [RGB] sub menu and then press the OK
button. The RGB menu bar will appear as shown.
2. Use the UP/ DOWN/ LEFT and RIGHT buttons to select
the desired RGB value.
- UP/ DOWN Button: Navigates between R, G, and B
icons.
- LEFT/ RIGHT Button: Changes value of each icon.
3. When you press the OK button, the value you set will be
saved and RGB setup mode will end.
EXIT:SH1 SET:OK
- When you press the Shutter button half-way, autofocus will be performed and the selected
photo frame will appear simultaneously.
- You can check the photo frame you added to pictures in Quick View or Play mode.
- If you select the [OFF] sub menu in the [P.FRAME] menu or turn on and off the camera in
the PROGRAM mode, the selected photo frame will be cancelled.
- Available photo frames are as follows:
You can add 9 types of frame-like borders to a still image you want to capture. 
2048
P.FRAME
RGB


1
FRAME                     OFF
Downloaded From camera-usermanual.com Samsung Manuals 
						

							42
Photo Frame
[ FRAME 1 ] [ FRAME 2 ] [ FRAME 3 ]
[ FRAME 4 ] [ FRAME 5 ] [ FRAME 6 ]
[ FRAME 7 ] [ FRAME 8 ] [ FRAME 9 ]
You can adjust the sharpness of the picture you want to
take. You cannot check the sharpness effect on the LCD
monitor before you take a picture, because this function is
applied only when the captured image is stored on the
memory. 
[ PROGRAM mode ]
2048
SHARPNESSSOFT
NORMAL
VIVID
RGB
Sharpness
Sub menu Icon  Description 
The edges of the image are softened. 
This effect is suitable for editing images on your PC.
The edges of the image are sharp. 
This is suitable for printing.
The edges of the image are emphasized. The edges will
appear sharp, but noise may occur in the recorded image.
VIVID NORMALSOFT
Downloaded From camera-usermanual.com Samsung Manuals 
						

							43
Save / Load the camera configuration (MYSET)
[PROGRAM mode]
2048
MYSET
LOAD
SAVECANCEL
MYSET1
Use the MYSET mode to save frequently used camera settings (SAVE) and use it later
(LOAD)
Saving the camera configuration: Available in the PROGRAM mode.
1. Select the STILL IMAGE mode by sliding the mode
switch.
2. Press the MENU button and select [PROGRAM] menu.
3. Press the Left/Right buttons to select the [MYSET] menu
tap.
4. Press the UP/DOWN buttons to select the [SAVE] menu
and press the right button.
5. Press the UP/DOWN buttons to select desired MYSET
slot number to save.
6. Press the OK button to save the current configuration in the selected MYSET slot.
EXIT: MENU MOVE:

Loading the saved camera configuration: available in the PROGRAM mode.
1. Select the STILL IMAGE  mode by sliding the mode
switch.
2. Press the MENU button and select [PROGRAM] menu.
3. Press the Left/Right buttons to select the [MYSET]
menu tap.
4. Press the UP/DOWN buttons to select the [LOAD] menu
and press the right button.
5. Press the UP/DOWN buttons to select desired MYSET
slot number to load.
6. Press the OK button to set the camera configuration as saved in the MYSET slot.
* The current MYSET slot number is displayed in the top left of the LCD.
* If you select [CANCEL] in the [LOAD] menu or turn on and off the camera in the MYSET
mode, the MYSET mode will be cancelled.
[ PROGRAM mode ]
2048
MYSET
CANCEL
MYSET1
MOVE: CHANGE : 

LOAD
SAVE
Downloaded From camera-usermanual.com Samsung Manuals 
						

							44
Starting play mode
If the memory card is inserted in the camera, all the camera functions apply only to the
memory card.
If the memory card is not inserted in the camera, all the camera functions apply only to the
internal memory.
If you have turned on the camera by pressing the POWER button, you can press the PLAY
MODE button once to switch to Play mode and press it again to switch to Recording mode.
You can set up the PLAY mode function by using the camera buttons and LCD monitor.
Playing back a still image
1. Select the PLAY mode by pressing the play
mode button (         ).
2. The last image stored on the memory is
displayed on the LCD monitor.
3. Select an image that you want to play back by
pressing the LEFT / RIGHT button.
Press and hold the LEFT or RIGHT button to
fast forward the images played.
Press the shutter button in Play mode to switch to the currently set shooting mode with
the mode switch.
INFORMATION
Downloaded From camera-usermanual.com Samsung Manuals 
						

							45
Starting play mode
Playing back a movie clip
Steps from 1-2 are the same as those to play back a still
image.
3. Select the recorded movie clip that you want to play back
by using the LEFT/RIGHT button. If you select a movie
clip, the movie clip indicator (        ) will be displayed on the
LCD monitor.
4. Press the play & pause button (           ) to play back a
movie clip file.
- To pause a movie clip file while playing it back, press the
play & pause button again.
- Pressing the play & pause button again will cause the
movie clip file will restart.
- To rewind the movie clip while it is playing, press the
LEFT button. To fast forward the movie clip, press the
RIGHT button.
- To stop playback of the movie clip, press the play & pause button, and then press the
LEFT or RIGHT button.
Playing back a recorded voice
Steps from 1-2 are the same as those to play back a still
image.
3. Select the recorded voice that you want to play back by
using the LEFT/RIGHT button. If you select a recorded
voice file, the voice indicator (        ) will be displayed on
the LCD monitor.
4. Press the play & pause button (            ) to play back a
recorded voice file.
- To pause a recorded voice file, while playing it back,
press the play & pause button again.
- To resume playback of the voice file, press the play & pause button.
- To rewind the voice file while it is playing, press the LEFT button. 
To fast forward the voice file, press the RIGHT button.
- To stop playback of the voice file, press the play & pause button, and then press the
LEFT or RIGHT button.
PLAY : 
00:00:02PLAY:
Downloaded From camera-usermanual.com Samsung Manuals 
						

							46
LCD monitor indicator
SIZE : 2560X1920 Size 
AV : F3.2 Aperture value
TV : 1/18 Shutter speed
FLASH: OFF Whether or not the flash
is used. 
DATE : 2004/10/01 Recording date
SIZE : 2560X1920
AV : F3.2
TV : 1/18
FLASH : OFF
DATE : 2004/10/01
If you press the LCD button, you can check the following recording information: 
The LCD monitor displays information about the shooting conditions.
100-0009
No. Description Icon Page 
1 Battery p.14
2 Play mode
3 File Type
4 Voice memo p.48
5 Protect indicator p.58
6 DPOF indicator p.59
7  Stored image number 100-0009
Downloaded From camera-usermanual.com Samsung Manuals 
						

							47
Using the camera buttons to adjust the camera
In Play mode, you can use the buttons on the camera to conveniently set up the Play mode
functions.
Image enlargement
1. Select an image that you want to enlarge and press the enlargement button.
2. Different parts of the image can be viewed by pressing the
5 function button.
3. Pressing the thumbnail button will zoom back to the
original full sized image.
- You can tell whether the image displayed is an enlarged
view by checking the image enlargement indicator shown
at the bottom left of the LCD monitor. (If the image is not
an enlarged view, the indicator will not be displayed.)
You can also check the area of enlargement.
- Movie clips and WAV files can’t be enlarged.
- If an image is enlarged, a loss of quality may occur.
You can view multiple pictures, enlarge a selected picture, and crop and save a selected area
of an image.
Thumbnail display
1. While an image is displayed full screen, press the
thumbnail  button.
2. The thumbnail display will highlight the image that had
been showing at the time the thumbnail mode was
selected.
3. Press the 5 function button to move to a desired image.
4. To view an image separately, press the enlargement
button.
100-0009
[ Normal display mode ] [ Thumbnail display mode ]
Pressing the thumbnail
button(       )
Pressing the
enlargement button(       )
Highlighted image
: MOVE
: DELETE
Thumbnail(       ) / Enlargement(       ) button 
Downloaded From camera-usermanual.com Samsung Manuals 
						

							48
Thumbnail(      ) / Enlargement(      ) button 
The maximum enlargement rate in proportion to the image size.
Trimming : You can extract part of the image that you want
and save it separately.
1. Select an image that you want to enlarge and press the
enlargement button.
2. Different parts of the image can be viewed by pressing
the 5 function button.
3. Press the MENU button and a message will be
displayed as shown alongside.
4. Select the submenu values by pressing the UP/DOWN
button and then press the OK button.
TRIM : trimmed images are saved in their last file names. 
CANCEL : cancels trimming.
If there is little memory space to save the trimmed image, the image cant be trimmed.
Voice (     ) memo / Up button
When the menu is displayed on the LCD monitor, pressing the UP button makes the menu
cursor move up. 
When the menu is not displayed on the LCD monitor, the UP button operates as the voice
memo button. You can add your audio to a stored still image.
Adding a Voice Memo to a Still Image
1. Press the LEFT/ RIGHT button to select an image that
you wish to add sound to.
2. Press the voice memo button (       ) and the voice memo
indicator will display. The camera is now ready to record
a voice memo.100-0009
START:SHUTTERSTANDBY
Image size 2560 2048 1600 1024  640
Maximum enlargement rateX8.0 X5.0 X3.0 X2.0 X2.0
TRIMMING?
TRIM
CANCEL
CONFIRM :OK
Downloaded From camera-usermanual.com Samsung Manuals 
						

							49
Voice (     ) memo / Up button
3. Press the shutter button to start recording and voice will
be recorded to the still image for 10 seconds. 
While the voice is recording, the recording status
window will be displayed as shown alongside.
4. The recording can be stopped by pressing the shutter
button again.
5. The (        ) icon will be displayed on the LCD monitor
after voice memo recording has finished. 
- Voice memos can’t be recorded onto movie clip files.
- A distance of 40cm between you and the camera
(microphone) is the best distance to record sound.
- The voice memo will be saved in *.wav format, but has
the same file name as the still image to which it
corresponds.
- If you add a new voice memo to the still image that
already has a voice memo, the existing voice memo will be erased.
Play & Pause (         ) / Down button
Play mode, the play & pause/ down button works as follows:
- If the menu is displayed
Press the DOWN button to move from the main menu to a sub menu, or to move down the
sub menu cursor.
- If a movie clip is playing
In Stop mode  : Plays a movie clip
During playback  : Temporarily stops playback
In Pause mode  : Resumes playback
100-0009
00:00:00
100-0009
[ Movie clip is paused ] [ Movie clip is playing ]
00:00:04
100-0009
00:00:06
100-0009
[ Movie clip is stopped ]
100-0009
REC
STOP:SHUTTER
Downloaded From camera-usermanual.com Samsung Manuals 
						

							50
LEFT/ RIGHT/ MENU/ OK button
LEFT / RIGHT/ MENU/ OK buttons activate the following.
- LEFT button : While the menu is showing, press the LEFT button to select the menu tab
to the left of the cursor.
- RIGHT button : While the menu is showing, press the RIGHT button to select the menu
tab to the right of the cursor, or to move an secondary menu.
- MENU button : When you press the MENU button, the play mode menu will be displayed
on the LCD monitor. Pressing it again will return the LCD to the initial
display.
- OK button : When the menu is displayed on the LCD monitor, the OK button is used
for confirming data that is changed by using the 5 function button.
The shooting information will be displayed on the LCD monitor.
The last image stored in the memory is displayed on the
LCD monitor by pressing the play mode button.
Pressing the LCD(          ) button in the PLAY mode will
change the display as shown below. [Image & Icons] 
[Image & Information] [Image only]
[ Image & Icons ] [ Image & Information ] [ Image only ]
Pressing the LCD button
Pressing the
LCD buttonPressing the
LCD button
LCD (       ) button 
Downloaded From camera-usermanual.com Samsung Manuals