Samsung Digimax U Ca3 Users Manual

							61
PictBridge: Picture Printing
When printing pictures by connecting the camera to the printer, use the AC adapter.
If the printer is turned off during printing, the printing will stop and the paper will be dispelled.
If there are continuous print error, please check the print condition. 
INFORMATION 
Printing Pictures
1. Connect the camera to your printer. The USB menu must
be set to [PRINTER] before you connect the camera to
the printer.(See p.58)
2. The [PICTBRIDGE] menu will appear.
3. Use the UP and DOWN buttons to select the [PRINT]
menu, and then press the OK button.
4. The screen shown on the right will appear and the picture
will be printed. If no picture is selected, the [NO IMAGE!]
message will be displayed. If you press the SHUTTER
button during printing, printing will be cancel and the menu
from Step 2 will appear.
5. If an error occurs during printing, the screen shown below will appear.
Press the OK button to cancel printing.
Follow the Steps 1 to 4 again to print the
picture(s).Press the OK button to resume
printing, or press the RIGHT button to
cancel printing.
[ Fatal error ] [ Recoverable error ]
PICTBRIDGE
IMAGES
SETUP
PRINT00 PRINTS
CUSTOM
MOVE: SET:OK
STOP:SHUTTER
FATAL ERROR
SET:OK
WARING
R RE
ES
SU
UM
ME
E:
:O
OK
K
C CA
AN
NC
CE
EL
L:
:
Downloaded From camera-usermanual.com Samsung Manuals 
						

							62
PictBridge : DPOF AUTO PRINT
This allows you to directly print the files with DPOF information. 
For instructions on how to set up DPOF, refer to pages 55 to 57.
This allows you to restore the values of the PictBridge menu, which was changed in
CUSTOMIZE, to their default values.
1. Connect the camera to your printer. The USB menu must
be set to [PRINTER] before you connect the camera to
the printer.(See p.58)
2. The [PICTBRIDGE] menu will appear.
3. Select the [RESET] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
PictBridge : RESET
Default print setting varies depending on the printer manufacturer. 
For your printer
s default setting, refer to the users guide that came with your printer. 1. Connect the camera to your printer. The USB
menu must be set to [PRINTER] before you
connect the camera to the printer.(See p.58)
2. The [PICTBRIDGE] menu will appear.
3. Use the UP and DOWN buttons to select the
[DPOF PRINT] menu, and then press the OK
button.
4. The screen shown on the right will appear and
the picture will be printed. If no picture is
selected, the [NO IMAGE!] message will be
displayed. If you press the SHUTTER button
during printing, printing will be cancel and the
menu from Step 2 will appear.
5. If an error occurs during printing, the error message number 5 on page 61 will be displayed.
For details, please refer to page 61.
PICTBRIDGE
SETUP
PRINT
DPOF PRNCUSTOM
MOVE: SET:OK
STOP:SHUTTER
PICTBRIDGE
PRINT
DPOF PRN
RESET NO
MOVE: CHANGE:
- If [NO] is selected : Settings will not be reset.
- If [YES] is selected : All print and image settings will be reset.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							63
Setup menu
In this mode, you can set up basic settings. You can use the setup menu in all camera modes,
except Voice Recording mode. The changed setup mode values will be maintained even if you
turn the camera off and then back on.  
The items indicated by                        are default settings.
Menu tab Main menu Sub menu Secondary menu Page
RESETp.65
SERIES
CANCELp.65
KOREAN JAPANESEp.66
ENGLISH RUSSIAN
FRENCH PORTUGUESE
GERMAN DUTCH
SPANISH DANISH
ITALIAN SWEDISH
S.CHINESE FINNISH
T.CHINESE THAI
NOp.66
YES
p.67
Y/M/D
M/D/Y
D/M/Y
OFF p.67
DATE
D & TIME
OFF p.68
ON
01 ~ 03 ~10 MIN
03/01/01 13:00
FILE
POWER OFF
LANGUAGE
FORMAT
DATE
IMPRINT
LAMP
ON
Downloaded From camera-usermanual.com Samsung Manuals 
						

							64
Setup menu
This function allows the user to select the file naming format.
Assigning File Names
1. In any mode other than Voice Recording mode, press the
MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [FILE] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[RESET] : After using the reset function, the next file
name will be set from 0001 even after formatting, deleting all or inserting a new
memory card.
[SERIES] : Under this system, the file name will directly follow the last stored file name,
regardless of any actions such as file deletion or formatting.
5. Press the menu button twice and the menu will disappear.
File name
SETUPFILE
PWR OFF
LANGUAGERESET
SERIES
BACK:
SET:OK
Menu tab Main menu Sub menu Secondary menu Page
OFFp.69
LOW 
MEDIUM
HIGH
DARKp.69 
NORMAL
BRIGHT
NTSCp.70
PAL
OFFp.71
COMPUTER p.72
PRINTER
NO p.72
YES
DEL.ANS.ON
OFF
SOUND
LCD 
VIDEO
Q.VIEW
USB
RESET
1 ~ 5 SEC
Downloaded From camera-usermanual.com Samsung Manuals 
						

							65
File name
The first stored folder name is 100SSCAM, and the first file name is SUC30001.
Whenever you store an image, the file number is increased by 1.
The file numbers are named from SUC30001 to SUC39999 automatically, 9999 files will
be stored in a folder.
The folder number is assigned sequentially from 100 to 999 as follows: 100SSCAM 
101SSCAM ~  999SSCAM.
The files used with the memory card conform to the DCF(Design rule for Camera File
systems) format.
INFORMATION
Even if the batteries or AC adapter are removed and inserted again, the power off
setting will be preserved.
Note that the automatic power off function will not operate if the camera is in PC mode,
slide show, playing back a voice recording or movie clip.
INFORMATION
Auto power off
Setting Power Off
1. In any mode other than Voice Recording mode, press the
MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [PWR OFF] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
Selecting [CANCEL] : The power off function will not
operate.
Selecting [ON] : A menu will be displayed on the
LCD monitor as shown alongside.
Select the desired time by pressing
the UP/DOWN button.
5. Press the menu button twice and the menu will disappear.
This function switches the camera off after a set amount of time in order to prevent
unnecessary battery drainage.
SETUPFILE
PWR OFF
LANGUAGECANCEL
ON
BACK:
SET:OK
SETUPFILE
PWR OFF
LANGUAGE01   MIN
BACK:SET:OK
Downloaded From camera-usermanual.com Samsung Manuals 
						

							66
Language 
Setting Language
1. In any mode other than Voice Recording mode, press the
MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [LANGUAGE] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button. 
LANGUAGE sub menu
: 
Korean, English, French, German, Spanish, Italian,
T.Chinese, S.Chinese, Japanese, Russian, Portuguese, Dutch, Danish, Swedish, Finnish, Thai.
5. Press the menu button twice and the menu will disappear.
There is a choice of languages that can be displayed on the LCD monitor. Even if the batteries
or AC adapter are removed and inserted again, the language setting will be preserved.
Formatting a memory card
Formatting a Memory Card
1. In any mode other than Voice Recording mode, press the
MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [FORMAT] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [No] is selected : The memory card will not be
formatted. Press the menu button twice and the menu display will
disappear. 
If [Yes] is selected : A [PLEASE WAIT!] message appears and the memory card will be
formatted. If you ran FORMAT in Play mode, a [NO IMAGE!]
message will appear.
This is used for formatting the memory card. If you run [FORMAT] on the memory card, all
images, including the protected images, will be deleted. Be sure to download important images
to your PC before formatting the memory card.
Be sure to run [FORMAT] on the following types of memory card.
- A new memory card, or an unformatted memory card.
- A memory card that has a file this camera can
t recognize or one that has been taken
from another camera.
Always format the memory card using this camera. If you insert a memory card that has
been formatted using other cameras, memory card readers, or PCs, you will get a
[CARD ERROR!] message.
INFORMATION
SETUPPWR OFF
LANGUAGE
FORMATNO
YES
BACK:
SET:OK
SETUPFILE
PWR OFF
LANGUAGEENGLISH
FRANÇAIS
BACK:SET:OK
Downloaded From camera-usermanual.com Samsung Manuals 
						

							67
Setting up the Date/ Time/ Date type
You can change the date and time that will be displayed on the captured images and set up the
date type.
Setting Date/Time & Selecting Date type
1. In any mode other than Voice Recording mode, press the
MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [DATE] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. 
Use the UP, DOWN, LEFT, and RIGHT buttons to select the
desired submenu value, and then press the OK button.
RIGHT button : Selects the
year/month/day/hour/minute/date type.
LEFT button : Moves the cursor to the [DATE/TIME]
main menu if the cursor is at the first item
of the date and time setup. In all other
cases, the cursor will be shifted to the left
of its current position.
UP and DOWN buttons: Changes the setting value.
- Date type 
[YY/MM/DD] : year/month/day [MM/DD/YY] : month/day/year   
[DD/MM/YY] : day/month/year
5. Press the menu button twice and the menu will disappear.
There is an option to include DATE/TIME on still images.
Date Imprinting
1. In any mode other than Voice Recording mode, press the
MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [IMPRINT] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Use the UP and DOWN buttons to select the desired date
imprint type, and then press the OK button.
[OFF] : The DATE & TIME will not be imprinted on the image file.
[DATE] : Only the DATE will be imprinted on the image file.
[DATE&TIME] : The DATE & TIME will be imprinted on the image file.
5. Press the menu button twice and the menu will disappear.
Imprinting the recording date
SETUPLANGUAGE
FORMAT
DATE03/01/01 12:00
YY/MM/DD
BACK:SET:OK
SETUPLANGUAGE
FORMAT
DATE03/01/01 12:00
YY/MM/DD
BACK:SET:OK
SETUPFORMAT
DATE
IMPRINTOFF
DATE
D & TIME
BACK:
SET:OK
Downloaded From camera-usermanual.com Samsung Manuals 
						

							68
Imprinting the recording date
The Date & Time are imprinted at the bottom right side of the still image.
The date will be imprinted as a DATE TYPE setting.
TIME is imprinted in the following way : [Hour : Minute] and hours are shown using the
12 hour clock.
The imprint function is applied only to still images.
INFORMATION
Function lamp
Setting the function lamp
1. In any mode other than Voice Recording mode, press the
MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [LAMP] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button. 
If [OFF] is selected : The fucntion lamp will not light up.
If [ON] is selected : The function lamp will light up.
5. Press the menu button twice and the menu will disappear.
Description of the Function lamp
Function Description
During power-on7 color lights blink and then turns off when the camera is ready to take a picture
After an image is capturedThe green lamp will blink once.
While recording a movie clipThe purple lamp will blink at a 1-second interval. 
During voice recording The blue lamp will blink at a 1-second interval. 
You can turn on and off the function lamp located on the front of the camera.
When the self-timer is
activatedEven if the function lamp is set to OFF, the self-timer LED will
work. (See page 30.)
SETUPDATE
IMPRINT
LAMPOFF
ON
BACK:
SET:OK
Downloaded From camera-usermanual.com Samsung Manuals 
						

							69
Sound 
If you set the operation sound to ON, various sounds will be activated for camera startup, when
button are pressed, and if there is a card error, so that you can be aware of the camera
operation status.
Setting Operation Sounds
1. In any mode other than Voice Recording mode, press the
MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [SOUND] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [SOUND] sub menu : OFF/LOW/MEDIUM/HIGH
5. Press the menu button twice and the menu will disappear.
Adjusting LCD Brightness
1. In any mode other than Voice Recording mode, press the
MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [LCD] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [LCD] sub menu : DARK, NORMAL, BRIGHT
5. Press the menu button twice and the menu will disappear.
LCD brightness
You can adjust the LCD brightness.
SETUPIMPRINT
LAMP
SOUNDLOW
MEDIUM
HIGH
BACK:
SET:OK
SETUPLAMP
SOUND
LCDDARK
NORMAL
BRIGHT
BACK:
SET:OK
Downloaded From camera-usermanual.com Samsung Manuals 
						

							70
Selecting Video out type
The Movie output signal from the camera can be NTSC or PAL. 
Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the
camera is connected. PAL mode can support only BDGHI.
Setting the Video Out Type
1. In any mode other than Voice Recording mode, press the
MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [VIDEO] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [VIDEO] sub menu : NTSC, PAL
5. Press the menu button twice and the menu will disappear.
NTSC  : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland,
Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland,
Thailand, Norway.
When using a TV as an external monitor, you will need to select the external or AV
channel of the TV.
There will be a digital noise on the external monitor, but it is not a malfunction.
If the image is not in the centre of the screen, use the TV controls to centre it.
When the camera is connected to an external monitor, the menu will be visible on the
external monitor and the menu functions are the same as those indicated on the LCD
monitor.
INFORMATION
Connecting to an external monitor
In RECORDING/ PLAY mode,
you can view the stored still
images or movie clips by
connecting the camera to an
external monitor via the A/V
cable. When the camera is
connected to an external
monitor, the LCD monitor will be
turned off automatically.
SETUPSOUND
LCD
VIDEONTSC
PAL
BACK:
SET:OK
Yellow color-Video
White color-Voice
Downloaded From camera-usermanual.com Samsung Manuals