Samsung Digimax U Ca3 Users Manual

							101
Setting up the application software
29. The Installation Wizard is finished now. Choose [Yes, I
want to restart my computer now], and then click [Finish]
to restart your PC. 
Choose  [No, I will restart my computer later], and then
click 
Finishto restart your PC later.
To proceed with the installation of DigiStudio (an
avatar creation program), choose [No, I will restart my
computer later].
30. After restarting the computer, connect the PC to the camera with the USB cable.
31. Turn the camera power on. [Found New Hardware Wizard] will open and the computer will
recognize the camera. If you have ever installed an image viewer program or your OS is
Windows XP, an image viewer program will open. If the image viewer program opens, the
camera driver was setup successfully.
[Click !]
* The MGI III file will open. 
Click on the Close button to close the window.[Click !]
32. If you can see [Removable Disk] under [My computer], the
camera driver installation was successful. Now you can
transfer image files from the camera to PC via the USB
cable.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							102
Setting up the application software
If you have installed the camera driver, [Found New
Hardware Wizard] may not open.
On a Windows 98 or 98 SE system, the Found
New Hardware Wizard dialog box opens and a
window asking you to select a driver file may
appear. In this case, specify the [D:\Digimax U-
CA3\Win 98FE_SE Driver] folder on the supplied
software CD.
When connecting the camera to your PC, it is
recommended that you use an AC power adapter.
Before connecting the camera to the PC, You
should first install the camera driver.
After installing the camera driver, you have to restart your PC.
If you connect the camera to the PC before installing the camera driver, the [Found New
Hardware Wizard] will open.
In this case, cancel the [Found New Hardware Wizard] and disconnect the camera.
Install the camera driver and connect the camera to the PC again.
Should the computer not find the camera driver after installation, please try one or more
of the following measures.
1. Delete the camera driver (p.108), and re-install the driver.
2. Refer to FAQ (p.123) to check for a possible solution to the problem.
3. If your PC’s central processing unit is VIA chip (This is shown in the USB Host
Controller), download the patch file from the Samsung Camera web page.
(http://www.samsungcamera.com)
INFORMATION
Downloaded From camera-usermanual.com Samsung Manuals 
						

							103
DigiStudio Installation guide
System Requirements for DirectX 8.1
1. If your PC does not have DirectX (version 8.1 or later) installed, follow the instructions provided
during the installation process to install DirectX.
2. If you are asked to confirm the installation of DirectX, click [Next >].
3. You will be asked to reboot after DirectX is installed.
Once the installation of DigiStudio is complete, be sure to reboot your PC.
System Requirements for QuickTime
1. In order to view 3D avatars you created with DigiStudio in MOV format from the camera or PC,
you must follow the instructions provided during the installation process and install the
QuickTime Player (version 6.0 or later).
2. If you are asked to confirm the installation of QuickTime, click [Next >].
3. Please select the [Recommended] installation type.(p.106)
System Requirements for DigiStudio 
DigiStudio requires the following minimum system configuration for smooth 3D performance. 
If your system does not meet the requirements, you will receive error messages and the
installation will not continue.
DigiStudio
Recommended System RequirementsMinimum System Requirements
CPU Pentium III 500Mhz   Pentium II 400Mhz 
RAM 128MB   64MB
Graphic Card
Sound Card
Hard Disk
Operating System
Web Browser
Graphic card with 3D acceleration and at
least 8MB of video RAM Graphic card with 3D acceleration and at
least 16MB of video RAM
16 Bit Stereo Sound Card
150MB or more available space 
Windows 98SE/2000/ME/XP  
Internet Explorer 5.0 or later
Downloaded From camera-usermanual.com Samsung Manuals 
						

							104
DigiStudio Installation guide
Cautions on the Graphic Card (VGA)
The DigiStudio software will not install on a PO with a graphic card that does not support 3D
acceleration and that has less than 8 MB video RAM. If the graphic card error screen appears
while using DigiStudio, please go through the following steps:
Depending on your graphics card, 3D avatars may not be supported.
Step 1: Go to My Computer Control Panel Display Settings, check the display type
and color palette settings.
Step 2: Set the color palette to High Color (16 bit) or True Color (32 bit).
For Voodoo3 or Savage4, set the color palette to High Color (16 bit).
Step 3: The following graphic cards do not support 3D acceleration and cannot be used with
DigiStudio: 
(1)ATI 3D (Charger /Pro Turbo /Xpression)/All in wonder pro
(2)ATI Rage (
/iic)/Rage 3D(LT Pro /Pro)/Xpert (98 /@play)
(3)nVidia Riva 128
(4)3dfx Voodoo 2
(5)SiS (6215A0 /6125B0 /6215C /5598 /530 /620 /540)
(6)Intel i740 graphics chip
(7)Hercules Terminator Beast
(8)Trident 3D /Blade /CyberBlade
(9)Diamond Multimedia FireGL 1000 Pro
(10)Number 9 SR9
Step 4: If the display type is set to Standard PCI Graphic
Adapter (VGA), refer to the graphic card error
screen and install the latest graphic card driver.
Graphic Card Error Screen
Downloaded From camera-usermanual.com Samsung Manuals 
						

							105
DigiStudio Installation
DigiStudio is a 3D avatar creation program. You can store
3D avatar files on the camera and use one of the avatars as
the startup image.
Be sure to check the system requirements (p. 103) before
installing the program.
This software is available in the Windows version only.
Be sure to install the camera driver before transferring the
avatars to the camera. (See page 95.)
For instructions on how to use DigiStudio, please refer to
Help.
1. When the installation screen shown on the right appears,
click [Install].
2. An installation start window will open. Click [Next >].
3. The Language Selection window will open. Click [Next >].
4. The QuickTime 6.3 Installation window will open. Click [Next >].
*For more information on the QuickTime installation, please refer to page 95.
5. The Welcome window will appear. Click [Next >].
Downloaded From camera-usermanual.com Samsung Manuals 
						

							106
DigiStudio Installation
6. The Software License Agreement window will appear, asking
you to agree to the licensing. Use the button on the bottom
left to select the language of your choice, and then click
[Agree] to accept the license agreement. The installation will
proceed to the next stage. If you do not agree to the license
agreement, click [Disagree]. The installation will be canceled.
If the language of your choice is not listed, please select
[English].
7. The Choose Destination Location window will open. 
Click [Next >]. To copy the files to a different folder, click
[Browse..] Browse to a folder you want to copy the files to.
8. The Choose Installation Type will open. 
Select [Recommended], and then click [Next >].
9. The Select Program Folder window will open. Click [Next >].
If you want to add the program icons to a different folder,
choose another folder, and then click [Next >].
10. The Enter Registration window will open. Enter your name
and organization in the respective fields, and then click
[Next >]. You may skip the Registration Number field.
11. The QuickTime program folder will appear. Click on the Close button to close the folder.
12. The Introduction window will open. Click [Next].
Downloaded From camera-usermanual.com Samsung Manuals 
						

							107
DigiStudio Installation
13. The [Connection Speed] window will open. Click [Next]. To choose another transfer rate, click
and select the desired transfer rate.
14. The Browser Plug-in window will open. Click [Next].
15. The File Type Association window will open. Click [Finish]. If you want to associate other file
formats with QuickTime, put a checkmark (V) besides the file formats you want.
16. The Finished window will open. Click [Close].
* The QuickTime Player will launch, the readme file will open, and the DirectX 8.1 Installation
window will open. Click on the Close button to exit the program.
17. The DirectX 8.1 Installation window will open. Click [Next >].
18. A window asking you to agree to licensing will open. 
Click [Yes] to agree to the license agreement. The
installation will proceed to the next stage. If you do not
agree to the license agreement, click [No]. The installation
will be canceled.
19. The Folder Selection window will open. Click [Next >]. 
To copy the files to a different folder, click [Browse..] Browse
to a folder you want to copy the files to.
20. Your installation is complete. Be sure to reboot your PC by
clicking [Finish].
Downloaded From camera-usermanual.com Samsung Manuals 
						

							108
Removing the USB Driver for Windows 98SE
To remove the USB driver, refer to the process shown below.
1. Trace [Start Settings] and click [Control Panel].
[Click !]
4. A window will open. Click the [OK] button and
the camera driver will be removed.5. Uninstallation is complete. 
Click the [Finish] button and the window
will disappear.
[Click !]
[Click !]
2. Double-click [Add/Remove programs].
3. The [Add/Remove Programs Properties] window will
open. Click [Digimax U-CA3 Camera] and click the
[Add/Remove] button.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							109
Removable Disk
To use this camera as a Removable Disk, install (p.95) the USB Driver.
1. Before turning the camera power on, connect the camera to the PC with the USB cable.
2. Click [Removable Disk] under [My computer] or [Windows Explorer].
3. Image files stored in the Removable Disk (DCIM 
100SSCAM) can be transferred to the PC.
Important information whilst using the Removable Disk
The [Removable Disk] indicator will not show when the camera power is off.
We recommend that you should copy the images to the PC to view them. Opening
images directly from the removable disk may be subject to unexpected disconnection.
When uploading images from the PC to the camera, ensure that the uploaded file
names are not the same as those already stored on the memory.
When you upload a file that is not taken by this camera to Removable Disk, the [FILE
ERROR!] message will be displayed on the LCD monitor in the PLAY mode, and
nothing is displayed in THUMBNAIL mode.
The camera status lamp will blink, when a file is transferred (copy or deletion) between
the PC and the camera.  Do not remove the USB cable until the lamp stops blinking. To
remove the USB cable in Windows 2000/ME/XP, use the [Unplug or Eject Hardware]
icon on the task bar.
INFORMATION
Downloaded From camera-usermanual.com Samsung Manuals 
						

							110
Removing the removable disk
Windows 98SE
1. Check whether the camera and PC are transferring a file. If the function lamp blinks, you have
to wait until the lamp illuminates.
2. Unplug the USB cable.
Windows 2000/ME/XP
(The illustrations may be different from the real display in accordance with
the Windows O/S.)
1. Check whether the camera and PC are transferring a file. If the function lamp blinks, you have
to wait until the lamp illuminates.
2. Double-click the [Unplug or Eject Hardware] icon on the
task bar.
3. The [Unplug or Eject Hardware] window will open.
Select the [USB Mass Storage Device] and click the
[Stop] button.
4. The [Stop a Hardware device] window will open. 
Select the [SAMSUNG DIGIMAX UCA3 USB Device]
and click the [OK] button.
5. A [Safe to Remove Hardware] window will open. 
Click the [OK] button.
[Click !]
[Double-click]
[Click !]
[Click !]
Downloaded From camera-usermanual.com Samsung Manuals