Samsung Digimax S700 User Manual
Have a look at the manual Samsung Digimax S700 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 66
]65^
Software Notes
About the software
System Requirements
Please ensure that you read the instruction manual carefully before use.
®The attached software is a camera driver and image editing software tool for
Windows.
®Under no circumstances should all or part of either the software or the user
manual be reproduced.
®Copyrights for software are licensed only for use with a camera.
®In the unlikely event of a manufacturing fault, we will repair or exchange your
camera. We cannot, however, be held...](http://img.usermanuals.tech/thumb/66/38356/w64_Samsung_Digimax_S700-65.png "Page 66
]65^
Software Notes
About the software
System Requirements
Please ensure that you read the instruction manual carefully before use.
®The attached software is a camera driver and image editing software tool for
Windows.
®Under no circumstances should all or part of either the software or the user
manual be reproduced.
®Copyrights for software are licensed only for use with a camera.
®In the unlikely event of a manufacturing fault, we will repair or exchange your
camera. We cannot, however, be held...")
![Page 67
]66^
Setting up the application software
ˆTo use this camera with a PC, install the application software first.
After this has been done, the stored images in the camera can be moved to the
PC and can be edited by an image editing program.
ˆYou can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
1. The auto run frame will display.
Click the [Install] menu in the Auto run
frame.2. Install the DirectX, Digimax Master by...](http://img.usermanuals.tech/thumb/66/38356/w64_Samsung_Digimax_S700-66.png "Page 67
]66^
Setting up the application software
ˆTo use this camera with a PC, install the application software first.
After this has been done, the stored images in the camera can be moved to the
PC and can be edited by an image editing program.
ˆYou can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
1. The auto run frame will display.
Click the [Install] menu in the Auto run
frame.2. Install the DirectX, Digimax Master by...")
![Page 68
]67^
Setting up the application software
Starting PC mode
4. Turn the camera power on.
The [Found New Hardware Wizard] will
open and the computer will recognize the
camera.
If your OS is Windows XP, an image
viewer program will open.
If the download window of Digmax Master
opens after starting Digimax Master, the
camera driver was setup successfully. 3. After restarting the computer, connect the PC to the camera with the USB
cable. ®If you connect the USB cable to a USB port on your PC and then...](http://img.usermanuals.tech/thumb/66/38356/w64_Samsung_Digimax_S700-67.png "Page 68
]67^
Setting up the application software
Starting PC mode
4. Turn the camera power on.
The [Found New Hardware Wizard] will
open and the computer will recognize the
camera.
If your OS is Windows XP, an image
viewer program will open.
If the download window of Digmax Master
opens after starting Digimax Master, the
camera driver was setup successfully. 3. After restarting the computer, connect the PC to the camera with the USB
cable. ®If you connect the USB cable to a USB port on your PC and then...")
![Page 69
]68^
Starting PC mode
ˆDownloading stored images
You can download the still images stored on the camera to your PCs hard disk
and print them or use a photo editing software to edit them.
1. Connect the camera to your PC with the USB cable.
2. On your computers desktop display, select
[My computer] and double click [Removable
Disk DCIM 100SSCAM].
The image files will then be displayed.
3. Select an image and press the right
mouse button.
4. A pop-up menu will open.
Click the [Cut] or [Copy] menu.
-...](http://img.usermanuals.tech/thumb/66/38356/w64_Samsung_Digimax_S700-68.png "Page 69
]68^
Starting PC mode
ˆDownloading stored images
You can download the still images stored on the camera to your PCs hard disk
and print them or use a photo editing software to edit them.
1. Connect the camera to your PC with the USB cable.
2. On your computers desktop display, select
[My computer] and double click [Removable
Disk DCIM 100SSCAM].
The image files will then be displayed.
3. Select an image and press the right
mouse button.
4. A pop-up menu will open.
Click the [Cut] or [Copy] menu.
-...")
![Page 70
]69^
Removing the removable disk
Starting PC mode
ƒWe recommend that you should copy the images to the PC to view them.
Opening images directly from the removable disk may be subject to
unexpected disconnection.
ƒWhen you upload a file that is not taken by this camera to the Removable
Disk, the [File Error!] message will be displayed on the LCD monitor in the
PLAY mode, and nothing is displayed in THUMBNAIL mode.CAUTION7. An image file is transferred from the camera
to your PC. 6. Press the right...](http://img.usermanuals.tech/thumb/66/38356/w64_Samsung_Digimax_S700-69.png "Page 70
]69^
Removing the removable disk
Starting PC mode
ƒWe recommend that you should copy the images to the PC to view them.
Opening images directly from the removable disk may be subject to
unexpected disconnection.
ƒWhen you upload a file that is not taken by this camera to the Removable
Disk, the [File Error!] message will be displayed on the LCD monitor in the
PLAY mode, and nothing is displayed in THUMBNAIL mode.CAUTION7. An image file is transferred from the camera
to your PC. 6. Press the right...")
![Page 71
]70^
Setting up the USB Driver for MAC
Removing the removable disk
6. A [Unplug or Eject Hardware] window will
open. Click the [Close] button and the
removable disk will be removed safely.
7. Unplug the USB cable.
1. A USB Driver for MAC is not included with the software CD as MAC OS
supports the camera driver.
2. Check the MAC OS version during start-up.
This camera is compatible with MAC OS 9.2 ~ 10.3.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be...](http://img.usermanuals.tech/thumb/66/38356/w64_Samsung_Digimax_S700-70.png "Page 71
]70^
Setting up the USB Driver for MAC
Removing the removable disk
6. A [Unplug or Eject Hardware] window will
open. Click the [Close] button and the
removable disk will be removed safely.
7. Unplug the USB cable.
1. A USB Driver for MAC is not included with the software CD as MAC OS
supports the camera driver.
2. Check the MAC OS version during start-up.
This camera is compatible with MAC OS 9.2 ~ 10.3.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be...")
![Page 72
]71^
Removing the USB Driver for Windows 98SE
Digimax Master
ˆYou can download, view, edit and save your images and movies with this
software. This software is only compatible with Windows except for
the Windows 98.
ˆTo start the program, click [Start Programs Samsung Digimax Master
Digimax Master].
3. Click [Next >] button.ƒDownloading images
1. Connect the camera to your PC.
2. A window for downloading images will
display after connecting the camera to
your PC.
- To download the captured images,...](http://img.usermanuals.tech/thumb/66/38356/w64_Samsung_Digimax_S700-71.png "Page 72
]71^
Removing the USB Driver for Windows 98SE
Digimax Master
ˆYou can download, view, edit and save your images and movies with this
software. This software is only compatible with Windows except for
the Windows 98.
ˆTo start the program, click [Start Programs Samsung Digimax Master
Digimax Master].
3. Click [Next >] button.ƒDownloading images
1. Connect the camera to your PC.
2. A window for downloading images will
display after connecting the camera to
your PC.
- To download the captured images,...")
![Page 73
]72^
Digimax Master
ƒImage viewer : You can view the stored images.¹
½
¾
¿
º
»
¼- Image viewer functions are listed below.
¹Menu bar : You can select menus.
File, Edit, View, Tools, Change functions, Auto download, help, etc.
ºImage selection window : You can select the desired images in this window.
»Media type selection menu : You can select image viewer, image edit and
movie edit functions in this menu.
¼Preview window : You can preview an image or a movie clip and check the
multi media...](http://img.usermanuals.tech/thumb/66/38356/w64_Samsung_Digimax_S700-72.png "Page 73
]72^
Digimax Master
ƒImage viewer : You can view the stored images.¹
½
¾
¿
º
»
¼- Image viewer functions are listed below.
¹Menu bar : You can select menus.
File, Edit, View, Tools, Change functions, Auto download, help, etc.
ºImage selection window : You can select the desired images in this window.
»Media type selection menu : You can select image viewer, image edit and
movie edit functions in this menu.
¼Preview window : You can preview an image or a movie clip and check the
multi media...")
![Page 74
ƒImage edit : You can edit the still image.¹
º
»¼- Image edit functions are listed below.
¹Edit menu : You can select the following menus.
[Tools] : You can resize or crop the selected image. See the [Help] menu.
[Adjust] : You can modify image quality. See the [Help] menu.
[Retouch] : You can change image or insert effects on the image.
See the [Help] menu.
ºDrawing tools : Tools for editing an image.
»Image display window : A selected image displays in this window.
¼Preview window : You can...](http://img.usermanuals.tech/thumb/66/38356/w64_Samsung_Digimax_S700-73.png "Page 74
ƒImage edit : You can edit the still image.¹
º
»¼- Image edit functions are listed below.
¹Edit menu : You can select the following menus.
[Tools] : You can resize or crop the selected image. See the [Help] menu.
[Adjust] : You can modify image quality. See the [Help] menu.
[Retouch] : You can change image or insert effects on the image.
See the [Help] menu.
ºDrawing tools : Tools for editing an image.
»Image display window : A selected image displays in this window.
¼Preview window : You can...")
![Page 75
]74^
FA Q
Case 6 When I open the Device Manager (by clicking Start (Settings)
Control Panel (Performance and Maintenance) System
(Hardware) Device Manager), there are Unknown Devices or Other
Devices entries with a yellow question mark(?) beside them or devices
with an exclamation mark(!) beside them.
Right-click on the entry with the question (?) or exclamation (!) mark
and select Remove. Restart the PC and connect the camera again.
For Windows 98 PC, remove the camera driver also, restart the PC,...](http://img.usermanuals.tech/thumb/66/38356/w64_Samsung_Digimax_S700-74.png "Page 75
]74^
FA Q
Case 6 When I open the Device Manager (by clicking Start (Settings)
Control Panel (Performance and Maintenance) System
(Hardware) Device Manager), there are Unknown Devices or Other
Devices entries with a yellow question mark(?) beside them or devices
with an exclamation mark(!) beside them.
Right-click on the entry with the question (?) or exclamation (!) mark
and select Remove. Restart the PC and connect the camera again.
For Windows 98 PC, remove the camera driver also, restart the PC,...")
![Page 76
ƒWhen the DirectX 9.0 or later is not installed
Install the DirectX 9.0 or later
1) Insert the CD provided with the camera
2) Run the windows explorer and select the [CD-ROM drive: USB
Driver\DirectX 9.0] folder and click the DXSETUP.exe file.The DirectX will be
installed. Visit the following site for downloading the
DirectX.http://www.microsoft.com/directx
ƒIf a PC (Windows 98) stops responding while the camera and PC are connected
repeatedly.
If a PC (Windows 98) is turned on for a long time and the...](http://img.usermanuals.tech/thumb/66/38356/w64_Samsung_Digimax_S700-75.png "Page 76
ƒWhen the DirectX 9.0 or later is not installed
Install the DirectX 9.0 or later
1) Insert the CD provided with the camera
2) Run the windows explorer and select the [CD-ROM drive: USB
Driver\DirectX 9.0] folder and click the DXSETUP.exe file.The DirectX will be
installed. Visit the following site for downloading the
DirectX.http://www.microsoft.com/directx
ƒIf a PC (Windows 98) stops responding while the camera and PC are connected
repeatedly.
If a PC (Windows 98) is turned on for a long time and the...")
]70^ Setting up the USB Driver for MAC Removing the removable disk 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely. 7. Unplug the USB cable. 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version during start-up. This camera is compatible with MAC OS 9.2 ~ 10.3. 3. Connect the camera to the Macintosh and turn the camera power on. 4. A new icon will be displayed on the desktop after connecting the camera to the MAC. 1. Double click a new icon on the desktop and the folder in the memory will be displayed. 2. Select an image file and copy or move it to MAC.ƒFor Mac OS 10.0 or later : First complete uploading from computer to camera and then remove the removable disk with the Extract command.CAUTION Using the USB Driver for MAC Downloaded From camera-usermanual.com Samsung Manuals
]71^ Removing the USB Driver for Windows 98SE Digimax Master ˆYou can download, view, edit and save your images and movies with this software. This software is only compatible with Windows except for the Windows 98. ˆTo start the program, click [Start Programs Samsung Digimax Master Digimax Master]. 3. Click [Next >] button.ƒDownloading images 1. Connect the camera to your PC. 2. A window for downloading images will display after connecting the camera to your PC. - To download the captured images, select the [Select All] button. - Select desired folder in the window and click the [Select All] button. You can save captured images and selected folder. - If you click the [Cancel] button, downloading will be cancelled. ˆTo remove the USB driver, refer to the process shown below. 1. Connect the camera to your PC and turn them on. 2. Check whether the Removable Disk is on the [My Computer]. 3. Remove the [Samsung Digital Camera] on the Device manager. 6. Uninstallation is complete. 4. Disconnect the USB cable. 5. Remove the [Samsung USB Driver] on the Add/Remove Programs Properties. Downloaded From camera-usermanual.com Samsung Manuals
]72^ Digimax Master ƒImage viewer : You can view the stored images.¹ ½ ¾ ¿ º » ¼- Image viewer functions are listed below. ¹Menu bar : You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. ºImage selection window : You can select the desired images in this window. »Media type selection menu : You can select image viewer, image edit and movie edit functions in this menu. ¼Preview window : You can preview an image or a movie clip and check the multi media information. ½Zoom bar : You can change preview size. ¾Folder display window : You can see the folder location of the selected image. ¿Image display window : Images of the selected folder are displayed. Refer to the [Help] menu in Digimax Master for further information. 4. Select a destination and make a folder to save downloaded images and folders. - Folder names can be made in order of date and images will be downloaded. - Folder name will be made as you want and images will be downloaded. - After selecting a folder that was made before, images will be downloaded. 5. Click [Next >] button. 6. A window will open as shown alongside. The destination of the selected folder will be displayed on the upper side of the window. Click the [Start] button to download the images.7. Downloaded images will be displayed. Downloaded From camera-usermanual.com Samsung Manuals
ƒImage edit : You can edit the still image.¹ º »¼- Image edit functions are listed below. ¹Edit menu : You can select the following menus. [Tools] : You can resize or crop the selected image. See the [Help] menu. [Adjust] : You can modify image quality. See the [Help] menu. [Retouch] : You can change image or insert effects on the image. See the [Help] menu. ºDrawing tools : Tools for editing an image. »Image display window : A selected image displays in this window. ¼Preview window : You can preview the changed image. A still image edited with Digimax Master can’t be played back on the camera. Refer to the [Help] menu in Digimax Master for further information. ]73^ Digimax Master ƒMovie edit : You can get the still image, movie clip, narration, music files together in a movie clip. ¹ º- Movie clip edit functions are listed below. ¹Edit menu : You can select the following menus. [Add Media] : You can add other media elements to a movie. [Edit Clip] : You can change the brightness, contrast, colour and saturation. [Effects] : You can insert an effect. [Set Text] : You can insert texts. [Narrate] : You can insert a narration. [Produce] : You can save the edited multi media as a new file name. You can select AVI, Windows media (wmv), Windows media (asf) and movie clip for this camera (avi, MPEG-4) file types. ºFrame display window : You can insert multi media in this window. Some movie clips that were compressed with a codec that is not compatible with the Digimax Master can’t play back in the Digimax Master. Refer to the [Help] menu in Digimax Master for further information. Downloaded From camera-usermanual.com Samsung Manuals
]74^ FA Q Case 6 When I open the Device Manager (by clicking Start (Settings) Control Panel (Performance and Maintenance) System (Hardware) Device Manager), there are Unknown Devices or Other Devices entries with a yellow question mark(?) beside them or devices with an exclamation mark(!) beside them. Right-click on the entry with the question (?) or exclamation (!) mark and select Remove. Restart the PC and connect the camera again. For Windows 98 PC, remove the camera driver also, restart the PC, and then reinstall the camera driver. Case 7 In some security programs (Norton Anti Virus, V3, etc.), the computer may not recognise the camera as a removable disk. Stop the security programs and connect the camera to the computer. Refer to the security program instructions about how to temporarily disable the program. Case 8 The camera is connected to the USB port located on the front of the computer. When the camera is connected to the USB port located on the front of the computer, the computer may not recognise the camera. Connect the camera to the USB port located on the back of the computer. ˆWhen the movie clip doesn’t play back on the PC. When the movie clip recorded by the camera doesn’t play back on the PC, the causes are mostly due to the codec installed on the PC. ˆPlease check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. Connect the supplied USB cable. Case 2 The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. Install the camera driver correctly. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera. Case 3 There is an unexpected error during file transfer. Turn the camera power off and on again. Transfer the file again. Case 4 When using the USB hub. There may be a problem in connecting the camera to the PC through the USB hub if the PC and the hub are not compatible. Wherever possible, connect the camera to the PC directly. Case 5 Are other USB cables connected to the PC? The camera may malfunction when it is connected to the PC at the same time as another USB cable. In this case, disconnect the other USB cable, and connect only one USB cable to the camera. Downloaded From camera-usermanual.com Samsung Manuals
ƒWhen the DirectX 9.0 or later is not installed Install the DirectX 9.0 or later 1) Insert the CD provided with the camera 2) Run the windows explorer and select the [CD-ROM drive: USB Driver\DirectX 9.0] folder and click the DXSETUP.exe file.The DirectX will be installed. Visit the following site for downloading the DirectX.http://www.microsoft.com/directx ƒIf a PC (Windows 98) stops responding while the camera and PC are connected repeatedly. If a PC (Windows 98) is turned on for a long time and the camera is connected repeatedly, the PC may not recognise the camera. In this case, re- start the PC. ƒIf a PC connected with the camera stops responding while Windows is starting. In this case, disconnect the PC and the camera and Windows will start. If the problem happens continuously, set the Legacy USB Support to disable and re-start the PC. The Legacy USB Support is in the BIOS setup menu. (The BIOS setup menu differs from the PC manufacturers and some BIOS menus don’t have Legacy USB Support) If you can’t change the menu by yourself, contact to the PC manufacturer or BIOS manufacturer. ƒIf the movie clip can’t be deleted, removable disk can’t be extracted or an error message displays during the file transfer. If you install only the Digimax Master, the problems mentioned above occasionally happen. - Close the Digimax Master program by clicking the Digimax Master icon on the Taskbar. - Install all the application programs included in the software CD. (You must install the Movie clip codec) ]75^ FA Q Correct Disposal of This ProductCorrect Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents Samsung Techwin’s will to create environment-friendly products, and indicates that the product satisfies the EU RoHS Directive. Downloaded From camera-usermanual.com Samsung Manuals
]76^ MEMO FCC notice ˆ ˆ NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/ TV technician for help. ˆ ˆ CAUTION : Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. ˆ ˆ Declaration of Conformity Trade Name : SAMSUNG TECHWIN Model No. : Digimax S700 Responsible Party : Samsung Opto-Electronics America, INC. Address : 40 Seaview Dr. Secaucus, NJ 07094 Telephone No. : 201-902-0347 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Downloaded From camera-usermanual.com Samsung Manuals
SAMSUNG TECHWIN CO., LTD. OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU, SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : ( 82) 31-740-8086, 8088, 8090, 8092, 8099 FAX : ( 82) 31-740-8398 www.samsungcamera.com SAMSUNG OPTO-ELECTRONICS AMERICA, INC. HEADQUARTERS 40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A. TEL : ( 1) 201-902-0347 FAX : ( 1) 201-902-9342 WESTERN REGIONAL OFFICE 18600 BROADWICK ST., RANCHO DOMINGUEZ, CA 90220, U.S.A. TEL : ( 1) 310-900-5263/5264 FAX : ( 1) 310-537-1566 www.samsungcamerausa.comSAMSUNG OPTO-ELECTRONICS FRANCE S.A.S. TOUR MAINE MONTPARNASSE 33, AVENUE DE MARINE 75755, PARIS CEDEX 15, FRANCE TEL: +33 (0)1 4279 2200 FAX : +33 (0)1 4320 4510 www.samsungphoto.fr SAMSUNG OPTO-ELECTRONICS GmbH ZENTRALE, KEINE REPARATUR AM KRONBERGER HANG 6 D-65824 SCHWALBACH/TS, GERMANY TEL: 49 (0) 6196 66 5303 FAX: 49 (0) 6196 66 5366 TECHNISCHE SERVICE HOTLINE: 00800 4526 3727 (nur kostenfrei für Anrufe aus Deutschland) Die Adressen Ihrer Kundendienste sowie die Garantiebestimmungen entnehmen Sie bitte aus dem beiliegenden Faltblatt (SAMSUNG INTERNATIONAL WARRANTY CERTIFICATE) INTERNET: www.samsungcameras.deTIANJIN SAMSUNG OPTO-ELECTRONICS CO.,LTD. 7 PINGCHANG ROAD NANKAI DIST., TIANJIN P.R CHINA POST CODE : 300190 TEL : ( 86) 22-2761-4599 FAX : ( 86) 22-2769-7558 www.samsungcamera.com.cn SAMSUNG OPTO-ELECTRONICS UK LIMITED SAMSUNG HOUSE 1000 HILLSWOOD DRIVE HILLSWOOD BUSINESS PARK CHERTSEY KT16 OPS U.K. TEL: 00800 12263727 (free for calls from UK only) UK Service Hotline : 01932455320 www.samsungcamera.co.uk RUSSIA INFORMATION CENTER SAMSUNG ELECTRONICS 117545 ST. DOROZHNAYA BUILDING 3, KORPUS 6, ENTRANCE 2, MOSCOW, RUSSIA TEL : ( 7) 095-363-1700 CALL FREE : ( 8) 800 200 0 400 (from Russia only) www.samsungcamera.ru The CE Mark is a Directive conformity mark of the European Community (EC) Internet address - http : //www.samsungcamera.com 6806-0430 Downloaded From camera-usermanual.com Samsung Manuals