Samsung Digimax S700 User Manual
Have a look at the manual Samsung Digimax S700 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
]40^ Delete ( ) button Printer button ˆIf you select [Computer] sub menu in the [USB] setup menu, [Connecting Computer] message will display when you connect the camera to your printer and the connection will not be established. In this case, press the Printer button. [Connecting Printer] message will display and the Easy printing mode will be selected. * In some instances the camera may not connect to the printer, this will depend on the make of the printer. - After the connection, the Easy printing menu will display on the LCD monitor. To display the PictBridge menu, press the Menu button. For more information about the PictBridge menu, refer to page 49. ˆThis deletes images stored on the memory. ƒDeleting Images in Play Mode 1. Select an image that you want to delete by pressing the LEFT / RIGHT button and press the DELETE( ) button. 2. A message will display as shown alongside on the LCD monitor. 3. Select the sub menu values by pressing the LEFT / RIGHT button and then press the OK button. If [Yes] is selected : deletes the selected images. If [No] is selected : cancels Delete Image.ƒBefore deleting images from the camera, you should protect or download images to your computer that you wish to keep.INFORMATION ƒDeleting Images in Thumbnail Display Mode 1. Use the UP, DOWN, LEFT, and RIGHT buttons to select the image you want to delete, and then press the DELETE ( ) button. 2. A message will display on the LCD monitor as shown below. 3. Select the sub menu values by pressing the LEFT / RIGHT button and then press the OK button. If [Yes] is selected : deletes the selected images. If [No] is selected : cancels Delete Image. Delete? Yes No Confirm:OK Delete? Yes No Confirm:OK Press the delete button. IMAGES One Pic All PicsExit:MENU Move: Downloaded From camera-usermanual.com Samsung Manuals
]41^ ˆPLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the PLAY mode button or shutter button.Menu tab Main menu Sub menu Secondary menu Page Show Play / Repeat PlayInterval 1, 3, 5, 10 sec OFF SelectAll PicsSelect -All Pics -2816 X 2112 -2592 X 1944 -2272 X 1704 -2048 X 1536 -1600 X 1200 -1024 X 768 -640 X 480 - User Image 1, 2 - SLIDE PROTECT DELETE RESIZE p.43~44p.44 p.45 p.45 Effect Unlock / Lock Left / Right / Menu / OK button Setting up the play back function using the LCD monitor ˆLEFT / RIGHT / MENU / OK buttons activate the following. - LEFT button : While the menu is showing, press the LEFT button to select the menu tab to the left of the cursor. While the menu is not showing, press the LEFT button to select the previous image. - RIGHT button : While the menu is showing, press the RIGHT button to select the menu tab to the right of the cursor, or to move to a secondary menu. While the menu is not showing, press the RIGHT button to select the next image. - MENU button : When you press the MENU button, the play mode menu will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. - OK button : When the menu is displayed on the LCD monitor, the OK button is used for confirming data that is changed by using the 5 function button. Downloaded From camera-usermanual.com Samsung Manuals
]42^ Setting up the play back function using the LCD monitor Menu tab Main menu Sub menu Secondary menu Page One Pic -All Pics -No -Yes - AutoPostcardCard4X6L2LLetterA4A3AutoFull1248916 Index IMAGES AUTO SET CUSTOM SETSizep.50 p.50 p.51 ˆThis menu is available while the camera is connected to a PictBridge supporting printer (direct connection to the camera, sold separately) with a USB cable. Layout Menu tab Main menu Sub menu Secondary menu Page Right 90° -Left 90° -180° -Horizontal -Vertical -Standard Select / All Pics / Cancel DPOF Index No / Yes p.46 Size Select / All Pics / Cancel No -Yes -Full -Basic - OSD Off - p.49 p.48 p.46 ROTATE COPY TO CARD OSD INFORMATION Downloaded From camera-usermanual.com Samsung Manuals
]43^ ƒStart the slide show : The slide show can start only in the [Show] menu. 1. Use the Up / Down buttons to select the [Show] menu and press the Right button. 2. Select a desired sub menu by pressing the Up / Down button. [Play] : The slide show is closed after one cycle. [Repeat Play] : The slide show is repeated until cancelled. 3. To save the changed settings, press the OK button. And then the slideshow will be started. ƒSetting play interval: Set the slide show play interval. 1. Select the [Interval] sub menu by pressing the UP / DOWN button and press the RIGHT button. 2. Use the Up / Down buttons to select the desired interval. 3. Press the OK button to save the configuration.ƒThe loading time depends on the image size and quality. ƒWhile the slide show is playing, only the first frame of a MOVIE file is displayed. ƒWhile the slide show is playing, the voice recording file will not display. INFORMATIONˆImages can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor. 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [SLIDE] menu tab. Setting up the play back function using the LCD monitor Starting the slide show SLIDE Show Interval EffectBack: Set:OK Play Repeat PlaySLIDE Show Interval EffectBack: Set:OK 1 sec 3 sec 5 sec 10 sec Menu tab Main menu Sub menu Secondary menu Page AutoPlainPhotoFastphotoAutoDraftNormalFineAuto Date Off OnAuto File name Off On Standard -Index - No -Yes -No - Yes -Type p.51 Menus are subject to change without prior notice.Quality CUSTOM SET p.51 p.52 p.52 PRINT DPOF PRINT RESET Downloaded From camera-usermanual.com Samsung Manuals
]44^ Starting the slide show Protecting images ˆThis is used to protect specific shots from being accidentally erased (Lock). It also unprotects images that have been previously protected (Unlock). ƒProtecting Images 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [PROTECT] menu tab. 3. Select a desired sub menu by pressing the UP / DOWN button and press the OK button. [Select ] : Selection window for an image to be protected / released is displayed. - Up / Down / Left / Right : Select an image - Zoom W / T Button : Protect / release the image - OK button : Your changes will be saved and the menu will disappear. [All Pics] : Protect / release all saved images - Zoom W / T Button : Protect / release the images - OK button : Your changes will be saved and the menu will disappear. - If you protect an image, the protect icon will be displayed on the LCD monitor. (An unprotected image has no indicator) - An image in LOCK mode will be protected from the delete function or [Delete] functions, but will NOT be protected from the [Format] function. PROTECT Select All PicsExit:MENU Move: Set:OK W Unlock T Set:OK W Unlock T ƒConfigure slide show effects : Unique screen effects can be used for the slide show. 1. Select the [Effect] sub menu by pressing the UP / DOWN button and press the RIGHT button. 2. Use the Up / Down button to select the type of effect. : Normal display. : Image is displayed slowly. : Image is displayed slowly from the centre outwards. : Image moves from the top left. : The image slides diagonally from top left to bottom right. : The image slides irregularly. 3. Press the OK button to confirm the setting. SLIDE Show Interval EffectBack: Set:OK OFF Downloaded From camera-usermanual.com Samsung Manuals
]45^ ˆChange the resolution (size) of pictures taken. Select the [User Image] to save an image to be the start-up image. The resized image will have a new file name. 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [RESIZE] menu tab. 3. Select a desired sub menu by pressing the UP / DOWN button and press the OK button. ƒA large sized image can be resized to a smaller sized image, but not vice versa. ƒOnly JPEG images can be resized. Movie clip (AVI), Voice recording (WAV) files can’t be resized. ƒYou can change the resolution of only those files compressed in the JPEG 4:2:2 format. ƒThe resized image will have a new file name. The [User Image] image is stored not on the memory card but on the internal memory. ƒOnly two [User Image] images can be saved. ƒIf the memory capacity is insufficient to store the resized image, a [Memory Full!] message will display on the LCD monitor and the resized image will not be stored. ƒImage Resize Types Deleting images Resize ˆOf all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place. The startup image is stored in the cameras internal memory (i.e., not on the memory card) and it will not be deleted even if you delete all files on the memory card. ƒDeleting images 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [Delete] menu tab. 3. Select a desired sub menu by pressing the UP / DOWN button and press the OK button. [Select] : Selection window for an image to delete is displayed. - Up / Down / Left / Right : Select an image - Zoom T Button : Select the image for deletion. ( mark) - OK Button : Press the OK button to display the confirmation message. Select the [Yes] menu and press the OK button to delete marked images. [All Pics] : Displays confirmation window. Select the [Yes] menu and press the OK button to delete all unprotected images. If there aren’t protected images, all the images are deleted and a [No Image!] message will display. 4. After deletion, the screen will be changed to the play mode screen. DELETE Select All PicsExit:MENU Move: Del:OKSelect:TDel:OKDelete? Yes No Confirm:OK RESIZE Exit:MENU Move: 2816X2112 2592X1944 2272X1704 2048X1536 1600X1200 7M O O O O O O O O6M X O O O O O O O5M X X O O O O O O4M X X X O O O O O3M X X X X O O O O2M X X X X X O O O1M X X X X X X O O VGA X X X X X X X OResize 2272X1704 2592x1944 2816X2112 2048X1536 1600X1200 1024X768 640X480 User Image 1,2 Downloaded From camera-usermanual.com Samsung Manuals
]46^ Rotating an image DPOF ˆYou can rotate the stored images by various degrees. Once the playback of the rotated picture is finished, it will switch back to the original state. 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [ROTATE] menu tab. 3. Select a desired sub menu by pressing the UP / DOWN button. [Right 90˚] : Rotate picture in a clock-wise direction [Left 90˚] : Rotate picture in a counter- clock-wise direction [Horizontal] : Rotate picture horizontally [Vertical] : Rotate picture vertically [180˚] : Rotate picture 180 degrees 4. Press the OK button and the rotated image will be displayed. If you display the rotated image on the LCD monitor, empty spaces may appear to the left and right of the image.ˆDPOF(Digital Print Order Format) allows you to embed printing information on your memory card’s MISC folder. Select the pictures to be printed and how many prints to make. ˆThe DPOF indicator will display on the LCD monitor when an image that has DPOF information plays back. Images can then be printed on DPOF printers, or at an increasing number of photo labs. ˆThis function is not available for Movie clips and Voice recording files. ˆWhen this menu is selected without inserting a memory card, you can select the [DPOF] menu but the menu cant be run. ROTATE Exit:MENU Move: Right 90J Left 90J 180J Horizontal Vertical Downloaded From camera-usermanual.com Samsung Manuals
]47^ DPOF : Standard DPOF : Index ˆThis function allows you to embed printing quantity information on a stored image. 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [DPOF] menu tab. 3. Select the [Standard] menu by pressing the UP / DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP / DOWN button and press the OK button. [Select] : Selection window for an image to print is displayed. - Up / Down / Left / Right : Select an image to print. - Zoom W / T Button : Select the number of prints. [All Pics] : Configure number of prints for all pictures except movie and voice files. - W / T button : Select a number of prints [Cancel] : Cancel the print setup. 5. Press the OK button to confirm the setting. If an image carries DPOF instructions, the DPOF indicator ( ) will show. ˆImages (except for movie clips and voice file) are printed as index type. 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [DPOF] menu tab. 3. Select the [Index] menu by pressing the UP / DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP / DOWN button. If [No] is selected : Cancel the index print setting. If [Yes] is selected : The image will be printed in index format. 5. Press the OK button to confirm the setting. DPOF Standard Index SizeBack: Set:OK Select All Pics CancelSet:OK W 00Prints T DPOF Standard Index SizeBack: Set:OK No Yes Set:OK ? 8ZQV\[ < Downloaded From camera-usermanual.com Samsung Manuals
]48^ DPOF : Print size Copy To Card ˆThis enables you to copy image files, movie clips and voice recording files to the memory card. ƒCopying to the Memory Card 1. Press the play mode button and press the menu button.2. Select the [COPY TO CARD] menu tab by pressing the LEFT / RIGHT button. 3. Select a desired sub menu by pressing the UP / DOWN button and press the OK button. - [No] : Cancels Copy to Card. - [Yes] : All images, movie clips and voice recording files saved in the internal memory are copied to the memory card after the [Processing!] message is displayed. After copying has been completed, the screen will return to play mode.ƒWhen this menu is selected without inserting a memory card, you can select the [COPY TO CARD] menu but the menu can’t be run. ƒIf there is not enough space available in the memory card to copy saved images in the internal memory (20MB), the [COPY TO CARD] command will copy only some of the images and display [Memory Full!] message. Then the system will return to the playback mode. Please be sure to delete any unnecessary files to free up space before inserting the memory card into the camera.ƒWhen you move the images that are stored in the internal memory by doing [COPY TO CARD] to the card, the next number of file names will be created in the card to avoid duplication of the file name. - When the [Reset] of the [File] setup menu is set : The copied file names start from after the last stored file name. - When the [Series] of the [File] setup menu is set : The copied file names start from after the last captured file name. After completing [COPY TO CARD], the last stored image of the last copied folder is displayed on the LCD monitor. INFORMATION COPY TO CARD Exit:MENU Move: No Yes ˆYou can specify the print size when printing images stored on the memory card. The [Size] menu is available only for DPOF 1.1 compatible printers. DPOF [Size] secondary menu : Cancel, 3X5, 4X6, 5X7, 8X10 ƒSetting the Print Size 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [DPOF] menu tab. 3. Select the [Size] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. [Select] : Selection window for an image to be changed printed size is displayed. - Up/ Down/ Left/ Right : Select an image.- Zoom W/ T Button : Change the print size. - OK button : Your changes will be saved and the menu will disappear. [All Pics] : Change print size of all saved images. - W/ T button : Select a print size - OK button : Confirm the changed setting. [Cancel] : Cancel all of the print size settings.ƒDepending on the manufacturer and print model, canceling the printing may take a little longer for the printer to process.INFORMATION Set:OK W Cancel T DPOF Standard Index SizeBack: Set:OK Select All Pics CancelSet:OK W Cancel T Downloaded From camera-usermanual.com Samsung Manuals
]49^ On Screen Display information PictBridge ˆYou can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. ƒSetting up the camera for connection with the printer 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT / RIGHT button and select [SETUP] menu tab. 3. Select [USB] menu by pressing the UP / DOWN button and press the RIGHT button. 4. Select [Printer] menu by pressing the UP / DOWN button and press the OK button. SETUP Format Date&Time Imprint Sound USB Back: Set:OK Computer Printer [Using the USB cable with Cradle][Using the USB cable with Camera] ˆYou can check shooting information about the displayed image. ƒHow to select the type of information you want to see 1. Press the play mode button and press the menu button. 2. Select the [OSD INFORMATION] menu tab by pressing the LEFT / RIGHT button. 3. Select a desired sub menu by pressing the UP / DOWN button and press the OK button. OSD INFORMATIONExit:MENU Move: Full Basic OSD Off ˆConnecting the Camera to a Printer ƒUsing the USB cable with Cradle (Optional) : Connect the camera and the cradle. Connect the cradle to a printer’s USB port with the supplied USB cable. ƒUsing the USB cable with Camera : Connect the camera to a printer’s USB port with the supplied USB cable. [Full] [Basic] [OSD Off] ISO : 80 Av : F 2.8 Tv : 1/30 Flash : On 3072X2304 2006/08/01 Downloaded From camera-usermanual.com Samsung Manuals