Samsung Digimax S500 User Manual

¡¶50¡·
PictBridge : Picture Selection
PictBridge : Print Setting
Exit:Shutter Set:OK
¡ÜSetting the Number of Copies to Print
- Select [One Pic] or [All Pics]. A screen where you can set the number of copies
to print will appear as shown below.
PREV
NEXT
0
Exit:Shutter Set:OK
0
AUTO SET
No
YesExit:MENU         Move:   


¡áAUTO SET
1. Use the LEFT and RIGHT buttons to select the 
[AUTO SET] menu tab.
2. Use the UP and DOWN buttons to select the
desired sub menu value, and then press the OK...

¡¶51¡·
PictBridge : Print Setting PictBridge : Printing
¡áPrinting Pictures
1. Use the LEFT and RIGHT buttons to select the [PRINT] menu tab.
2. Use the UP and DOWN buttons to select the desired sub menu value, and
then press the OK button.
[Standard] : Print the pictures stored in the
memory card in set numbers. 
One picture is printed on one
piece of paper.
[Index] : Print multiple images on one
sheet of paper.
3. The screen shown on the right will appear and the
picture will be printed. If no picture...

¡¶52¡·
PictBridge : Printing Setup menuPictBridge : Reset
1. Use the LEFT and RIGHT buttons to select the
[RESET] menu tab.
2. Use the UP and DOWN buttons to select the
desired sub menu value, and then press the OK
button.
If [No] is selected : Settings will not be reset.
If [Yes] is selected : All print and image settings will
be reset.
¡ØDefault print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that came with your
printer.
RESET...

¡¶53¡·
Setup menu
¡ØMenus are subject to change without prior notice.Menu tab Main menu Sub menu Secondary menu Page
Computer
-
Printer
-
Off
-
On
-
Dark
-
Normal
-
Bright
-
NTSC -PAL -
Quick View Off / 0.5, 1, 3 sec -
p.57
No
-
Yes
-
Alkaline
-
Ni-MH -
AF Lamp
LCD
Video Out
Reset
Battery typep.56
p.56
p.57
p.58
p.58USBp.56
¡ÜAssigning File Names
1. In any mode with the exception of Voice Recording
mode, press the MENU button.
2. Press the LEFT / RIGHT button and select the
[SETUP] menu tab.
3. Select...

¡¶54¡·
Setup menu
[ Auto power off ]¡áThis function switches the camera off after a set amount of time in order to
prevent unnecessary battery drainage.
¡ÜSub menus
[Off] : The power off function will not
operate.
[1, 3, 5, 10 min] : The power will turn off automatically
if not used for the period of time
specified.
- After replacing the battery, the power off setting will
be preserved. 
- Note that the automatic power off function will not operate if the camera is in
PC mode, slide show, playing back a...

¡¶55¡·
[ Formatting a memory ]¡áThis is used for formatting the memory. If you run [Format] on the memory, all
images, including the protected images, will be deleted. Be sure to download
important images to your PC before formatting the memory.
¡ÜSub menus
[No] : The memory will not be formatted. Press the
menu button three times and the menu display
will disappear.
[Yes] : A [Processing!] message appears and the
memory will be formatted. If you run FORMAT
in Play mode, a [No Image!] message will...

¡¶56¡·
Setup menu
[ Sound ]¡áIf you set sound to ON, various sounds will be activated for camera startup,
when buttons are pressed, so that you can be aware of the camera operation
status.
¡Ü[Sound] sub menu : Off / Low / Medium / High[ Connecting an External Device (USB) ]¡áYou can select an external device to which you want to connect the camera
using the USB cable.
¡ÜSub menus
- [Computer] : Select this if you want to connect the
camera to your PC.
Refer to page 68 for instructions on
how to connect...

¡¶57¡·
[ Selecting Video out type ]¡áThe Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV, etc.)
to which the camera is connected. PAL mode can support only BDGHI.
¡áConnecting to an external monitor
¡ÜUsing the USB cable with Cradle (Optional) : 
Connect the camera and the cradle. Connect the
cradle to an external monitor with the supplied AV
cable.
¡ÜUsing the AV cable with Camera : Connect the
camera to an external...

¡¶58¡·
Setup menu
Setting up the Mycam menu
[ Initialisation ]¡áAll camera menu and function settings will be restored to their default values.
However, values for DATE/TIME, LANGUAGE, and VIDEO OUT will not be
changed.
¡ÜSub menus
[No] : Settings will not be restored to their defaults.
[Yes] : All settings will be restored to their defaults.
SETUP
AF Lamp
LCD
Video Out
Quick View
ResetBack:
Set:OK
No
Yes
[ Selecting a battery type ]¡áIf a battery type is selected, the camera will be optimized according...

¡¶59¡·
Start up soundShutter sound
Important notes
¡áYou can select the sound that is activated whenever the camera is turned on.
¡ÜStart up sound : [Off], [Sound 1], [Sound 2], [Sound 3]
- If the start up image is set to [Off], the start up sound
will not activate, even though you may have set
these to on. 
¡áYou can select the shutter sound.
¡ÜShutter sound : [Off], [Sound 1], [Sound 2], [Sound 3]
MYCAM
Start Image
Start Sound
Shutter SoundOff
Sound 1
Sound 2
Sound 3Back:
Set:OK
MYCAM
Start Image...