Samsung Digimax S500 User Manual

							Thank you for buying a Samsung Camera.
This manual will guide you through using the camera, including 
capturing images, downloading images and using the application software. 
Please read this manual carefully before using your new camera.
User’s Manual
ENGLISH
Downloaded From camera-usermanual.com Samsung Manuals 
						

							¡¶1¡·
Instructions Getting to know your camera
¡áUse this camera in the following orderSet up the camera driver
Take a picture
Insert the USB cableCheck the camera’s powerCheck [Removable Disk]
Before connecting the camera to a PC, via
the USB cable, you will need to set up the
camera driver. Install the camera driver
that is contained in Application software
CD-ROM. (p.66)
Take a picture.  (p.14)
Insert the supplied USB cable into the
PC’s USB port and the camera’s USB
connection terminal. (p.67)
Check the camera’s power. If the power is
turned off, press the camera button to turn
it on. 
Open Window¡¯s EXPLORER and search
for [Removable Disk]. (p.68)
¡ÜIf you use a card reader to copy the images on the memory card to your PC, the
images could be damaged. When transferring the images taken with the camera
to your PC, be sure to use the supplied USB cable to connect the camera to
your PC. Please note that the manufacturer holds no responsibility for loss or
damage of images on the memory card due to the use of a card reader.
Thank you for buying a Samsung Digital Camera.
¡ÜPrior to using this camera, please read the user manual thoroughly.
¡ÜWhen you require After Sales service, please bring the camera and the cause of
the camera malfunction (such as battery, Memory card etc.) to the A/S centre.
¡ÜPlease check that the camera is operating properly prior to when you intend to
use it (e.g. for a trip or an important event) to avoid disappointment. Samsung
camera takes no responsibility for any loss or damages that may result from
camera malfunction.
¡ÜKeep the manual in a safe place.
¦SMicrosoft, Windows and Windows logo are registered trademarks of Microsoft
Corporation incorporated in the United States and/or other countries.
¦SAll brand and product names appearing in this manual are registered trademarks
of their respective companies.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							DangerWarning
¡¶2¡·
Caution
WARNING indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
¡áDo not use the flash in close proximity to people or animals. Positioning the flash too
close to your subject’s eyes may cause eyesight damage.
¡áFor safety reasons keep this product and accessories out of reach of children or
animals to prevent accidents e.g.:
¦USwallowing battery or small camera accessories. If an accident should occur,
please consult a doctor immediately.
¦UThere is the possibility of injury from the camera’s moving parts.
¡áBattery and camera may become hot during prolonged use and it may result in
camera malfunction.  Should this be the case, allow the camera to sit idle for a few
minutes to allow it time to cool.
¡áDo not leave this camera in places subject to extremely high temperatures, such as
a sealed vehicle, direct sunlight or other places of extreme variances in temperature.
Exposure to extreme temperatures may adversely affect the camera’s internal
components and could cause a fire.
¡áWhen in use, do not cover the camera or Charger. This may cause heat to build up
and distort the camera body or cause a fire. Always use the camera and its
accessories in a well-ventilated area. DANGER indicates an imminently hazardous situation which, if not avoided, will result
in death or serious injury.
¡áDo not attempt to modify this camera in any way. This may result in fire, injury,
electric shock or severe damage to you or your camera. Internal inspection,
maintenance and repairs should be carried out by your dealer or Samsung Camera
Service centre.
¡áPlease do not use this product in close proximity to flammable or explosive gases,
as this could increase the risk of explosion.
¡áShould any form of liquid or a foreign object enter the camera, do not use it. Switch
off the camera, and then disconnect the power source. You must contact your
dealer or Samsung Camera Service centre. Do not continue to use the camera as
this may cause a fire or electric shock.
¡áDo not insert or drop metallic or inflammable foreign objects into the camera through
access points e.g. the memory card slot and battery chamber. This may cause a fire
or electric shock.
¡áDo not operate this camera with wet hands. This could pose a risk of electric shock.
CAUTION indicates a potentially hazardous situation, which, if not avoided, may
result in a minor or moderate injury.
¡áLeaking, overheating, or burst battery could result in fire or injury.
¦UUse battery with the correct specification for the camera.
¦UDo not short circuit, heat or dispose of battery in fire.
¦UDo not insert the battery with the polarities reversed. 
¡áRemove the battery when not planning to use the camera for a long period of
time. Battery may leak corrosive electrolyte and permanently damage the
camera’s components.
¡áDo not fire the flash while it is in contact with hands or objects. Do not touch the
flash after using it continuously. It may cause burns.
¡áDo not move the camera while it is switched on, if you are using the AC Charger.
After use, always switch off the camera before unplugging the cable from the
wall socket. Then make sure that any connector cords or cables to other devices
are disconnected before moving the camera. Failure to do so may damage the
cords or cables and cause a fire or electric shock.
¡áTake care not to touch the lens or lens cover to avoid taking an unclear image
and possibly causing camera malfunction.
¡áAvoid obstructing the lens or the flash when you capture an image.
Downloaded From camera-usermanual.com Samsung Manuals 
						

							¡¶3¡·
Contents
READY¡ÜSystem chart
4
¡ÜIdentification of features5
¡áFront & Top5
¡áBack & Bottom6
¡áBottom / 5-function button7
¡áCradle(Optional)7
¡áSelf-timer lamp8
¡áCamera Status Lamp8
¡áMode icon8
¡ÜConnecting to a Power Source8
¡áUsing the batteries8
¡ÜInserting the memory card9
¡Ü
Instructions on how to use the memory card
10
¡Ü
When Using the Camera for the First Time
12
¡ÜLCD monitor indicator13
¡ÜStarting the recording mode14
¡áHow to use the AUTO mode14
¡á
How to use the PROGRAM mode
14
¡á
How to use the MANUAL mode
14
¡á
How to use the MOVIE CLIP mode
15
¡á
Recording the movie clip without voice
15
¡á
Pausing while recording a movie clip
15
¡áNight / Portrait / Children mode16
¡áHow to use the SCENE mode16
¡áHow to use the VOICE
RECORDING mode17
¡ÜThings to Watch Out for When
Taking Pictures17 
¡ÜUsing the camera buttons to set 
the camera18¡áPOWER button
18
¡áShutter button18
¡áZOOM W / T button18
¡áVoice recording / Voice memo / 
UP button20
¡áMacro / Down button20
¡áFocus lock21
¡áFlash / Left button21
¡áSelf-timer / Right button23
¡áMENU / OK button24
¡áE (Effect) button24
¡áSpecial Effect : Colour25
¡á
Special Effect : Preset focus frames
25
¡á
Special Effect : Composite shooting
26
¡áSpecial Effect : Photo Frame28
¡á+ / - button28
¡ÜUsing the LCD monitor to set the
camera settings31
¡áHow to use the menu31
¡áSize32
¡áQuality / Frame rate32
¡áMetering33
¡áContinuous shot33
¡áSharpness34
¡áOSD (On Screen Display)
information34
¡ÜStarting play mode35
¡áPlaying back a still image35
¡áPlaying back a movie clip35
¡áHow to capture the movie clip35
¡áPlaying back a recorded voice36
¡ÜLCD  monitor Indicator36¡ÜUsing the camera buttons to set 
the camera
37
¡á
Thumbnail / Enlargement button
37
¡áVoice memo / Up button38
¡áPlay & Pause / Down button39
¡áE (Effect) button39
¡áDelete button40
¡áPrinter button40
¡áLeft / Right / Menu / OK button41
¡ÜSetting up the play back function
using the LCD monitor41
¡áStarting the slide show43
¡áProtecting images44
¡áDeleting images45
¡áResize45
¡áRotating an image46
¡áDPOF46
¡áDPOF : Standard47
¡áDPOF : Index47
¡áDPOF : Print size48
¡áCopy To Card48
¡áOn Screen Display information49
¡áPictBridge49
¡áPictBridge : Picture Selection50
¡áPictBridge : Print Setting50
¡áPictBridge : Printing51
¡áPictBridge : Reset52
¡ÜSetup menu52
¡áFile name53
¡áAuto power off54
¡áLanguage 54
¡áFormatting a memory 55¡á
Setting up the Date / Time / Date type
55
¡áImprinting the recording date 55
¡áSound 56
¡á
Connecting an External Device (USB)
56
¡áAuto Focus lamp56
¡áLCD brightness 56
¡áSelecting Video out type57
¡áQuick view 57
¡áInitialisation 58
¡áSelecting a battery type58
¡ÜSetting up the Mycam menu58
¡áStart up image58
¡áStart up sound59
¡áShutter sound59
¡ÜImportant notes59
¡ÜWarning indicator61
¡Ü
Before contacting a service centre
61
¡ÜSpecifications63
¡ÜSoftware Notes65
¡ÜSystem Requirements65
¡ÜAbout the software65
¡Ü
Setting up the application software
66
¡ÜStarting PC mode67
¡ÜRemoving the removable disk69
¡Ü
Setting up the USB Driver for MAC
70
¡ÜUsing the USB Driver for MAC70
¡ÜRemoving the USB Driver for
Windows 98SE70
¡ÜDigimax Master71
¡ÜFAQ73
PLAY
SETUP
SOFTWARE
RECORDING
Downloaded From camera-usermanual.com Samsung Manuals 
						

							¡¶4¡·
System chart
Please check that you have the correct contents before using this product. The
contents can vary depending on the sales region. To buy the optional equipment,
contact your nearest Samsung dealer or Samsung service centre.
Software CD 
(see p.65) Camera strap User manual, 
Product warranty Camera case
Rechargeable battery(SNB-2512)AA Alkaline
Batteries
Rechargeable battery(SBP-2524)  Cradle 
AC cord
Charger(SBC-N1)
USB / AV cableExternal monitor
Yellow colour - Video
White colour - Voice
(see p.57)For Windows
¦UWindows 98 / 98SE / 2000 / ME / XP
¦UPC with processor better than Pentium
II 450MHz  (Pentium 700MHz or better
is recommended)
¦U200MB of available hard-disk space
(Over 1GB is recommended)
¦UMinimum 64MB RAM (XP : 128MB)
¦U1024x768 pixels, 16-bit colour display
compatible monitor (24-bit colour
display recommended)
¦UCD-ROM drive
¦UDirectX 9.0 or later
¦UUSB port
For Macintosh
¦UPower Mac G3 or later
¦UMac OS 9.2 ~ 10.3
¦UMinimum 64MB RAM
¦U110MB of available hard-disk space
¦UUSB port
¦UCD-ROM drive
System Requirements
When you connect the camera to a
computer, printer or external monitor,
you must to use the USB / AV cable
supplied with the camera, or the
external devices cant recognise the
camera.CAUTION
< Included items > 
Computer 
(see p.67)
PictBridge compatible
printer (see p.49)
SD memory card/ MMC
(see p.9)
DPOF compatible
printer (see p.46)
Downloaded From camera-usermanual.com Samsung Manuals 
						

							¡¶5¡·
Identification of features
Flash
Self-timer lamp /
Auto focus lampStrap eyelet Shutter buttonMode dial
Power button
Speaker
Microphone Lens / Lens cover
Front & Top
Downloaded From camera-usermanual.com Samsung Manuals 
						

							¡¶6¡·
Identification of features
Back & Bottom
LCD monitor
Tripod
5 function button E (Effects) button
Play mode / Printer button Zoom T button (Digital zoom) Camera status lamp
Zoom W button (Thumbnail)+/- button, Delete buttonUSB / AV connection terminal
Cradle connector
Downloaded From camera-usermanual.com Samsung Manuals 
						

							¡¶7¡·
Identification of features
Bottom / 5-function button
Cradle (Optional)¡áYou can recharge your rechargeable battery (SBP-2524), transfer a captured
image to print, and download images with the cradle. (Refer to page  49, 67~69)
Camera
connection
terminal
AC connection
terminalUSB port /
AV connection terminal
Battery chamber
Battery chamber cover
Voice memo / Voice Recording / Up button
Flash / 
Left buttonMenu / OK button
Self-timer / 
Right button
Macro / Down button
Play & Pause button
¡ÜTop
¡ÜBack
Memory card slot
Downloaded From camera-usermanual.com Samsung Manuals 
						

							¡¶8¡·
Connecting to a Power Source
Identification of features
¡áSelf-timer lampIcon Status Description
For the 2 seconds, the lamp blinks quickly at 0.25-second
intervals before taking a picture
For the first 8 seconds, the lamp blinks at 1 second
intervals.
For the final 2 seconds, the lamp blinks quickly at 0.25-second intervals.
A picture will be taken after about 10 seconds and 2
seconds later a second picture will be taken.
Blinking Blinking Blinking
¡áCamera Status Lamp¡áMode icon  Refer to page 14~17 for more information about the camera mode
setting.
MODE AUTO
PROGRAM
MANUAL
NIGHT
PORTRAIT
CHILDREN
MOVIE PLAY
Icon
LANDSCAPE
CLOSE UP
SUNSET
DAWN  
BACKLIGHT
FIREWORKS
BEACH & SNOW
IconMODESCENE
Status Description
The lamp turns on and off when the camera is ready to
take a picture
The lamp blinks while saving the image data and turnsoff when the camera is ready to take a picture
While voice memo recording
The lamp blinks
While voice recording The lamp blinksTransmitting Data with a PC
The lamp turns on (LCD monitor turns off)
When the printer is printing
The lamp blinksThe lamp turns on (The camera focus on the subject)The lamp blinks (The camera doesnt focus on the subject)
After taking a pictureWhen the AF activatesWhen the USB cable is
inserted to a printerThe lamp is off Power on
¡ÜWe recommend using batteries for a digital camera (Within a year from the date
of manufacture). The batteries are listed below.
- Non rechargeable batteries : 2 X AA Alkaline (High Capacity) 
- Rechargeable batteries : SNB-2512 (Ni-MH)
SBP-2524 (Ni-MH)
Using the batteries
Downloaded From camera-usermanual.com Samsung Manuals 
						

							¡¶9¡·
Connecting to a Power Source
Important information about battery usage
¡ÜWhen the camera is not used, turn off the camera power.
¡ÜPlease remove the battery if the camera will not be used for long periods. 
Battery can lose power over time and are prone to leaking if kept inside the
camera.
¡ÜLow temperatures (below 0˚C) can affect the performance of the battery
and you may experience reduced battery life.
¡ÜBatteries will usually recover at normal temperatures.
¡ÜDuring extended use of the camera, the camera body may become warm.
This is perfectly normal.INFORMATION
Inserting the memory card
¡áInsert the battery as shown 
- If the camera does not turn on after you
have inserted battery, please check
whether the battery is inserted with the
correct polarity (+ / -).
- When the battery chamber cover is opened,
do not press the battery chamber cover by
force. This may cause damage to the
battery chamber cover. 
Battery
status Battery
indicator
The battery is
fully charged
Low battery capacity
(Prepare to recharge 
or use spare battery)Low battery capacity
(Prepare to recharge
or use spare battery)Low battery capacity
(Prepare to recharge
or use spare battery)
¡áThere are 4 indicators for battery condition that are displayed on the LCD
monitor.¡áInsert the memory card as shown. 
- Turn off the camera’s power before
inserting the memory card. 
- Have the front of the memory card facing
toward the front of the camera (lens) and
the card pins toward the back of the camera
(LCD monitor). 
- Do not insert the memory card the wrong
way round. Doing so may damage the
memory card slot.
Downloaded From camera-usermanual.com Samsung Manuals