Samsung Digimax Pro815 User Manual

¡¶31¡·
¡áHow to use the SHUTTER PRIORITY mode (          )
This mode will set the shutter speed for automatic exposure
depends on the brightness of the object by automatic
aperture value setting in the camera.
Steps 1~2 are the same as those for AUTO mode.
3. Select the SHUTTER PRIORITY mode by rotating 
the mode dial.
4. Select the desired shutter speed by rotating the Front 
jog dial (JOG1).
5. Point the camera towards the subject and compose 
image by using the LCD.
6. Press the shutter button to...

¡¶32¡·
¡áHow to use the MySET mode (          )
This mode allows users to save frequently used shooting
settings for later use.
Steps 1~2 are the same as those for AUTO mode.
3. Select the MySET mode by rotating the mode dial.
4. Press the menu button and select the [          ] menu tab.
5. Press the Right button and select the [Load Myset] menu
by pressing the Up/ Down button.
6. Press the Right button and select a desired MySET
number by pressing the Up/ Down button.
7. Press the OK button and a...

¡¶33¡·
¡áHow to use the SCENE mode (                   )
Use the menu to easily configure optimal settings for a
variety of shooting situations. These include NIGHT,
PORTRAIT, CHILDREN, LANDSCAPE, CLOSE UP,
TEXT, SUNSET, DAWN, BACKLIGHT, FIREWORKS 
and BEACH & SNOW scenes.
Steps 1~2 are the same as those for AUTO mode.
3. Select the SCENE mode by rotating the mode dial.
4. Press the SCENE button and scene menu will display 
as shown alongside.
5. Select the desired Scene sub menu by rotating the Rear
jog...

¡¶34¡·
¡áPressing the shutter button down half way.
Lightly press the shutter button to confirm focus and flash battery charge (p.14).
- When the green auto focus frame lights up, it means the camera is focused on the subject
and a beep will sound.
- When the flash is charged, the flash status lamp (Red) will illuminate. Press the shutter
button all way down to take the picture.
¡á
The available recording time may vary depending on shooting conditions and camera settings.
¡áWhen the Flash Off or Slow...

¡¶35¡·
¡áThe RECORDING (AUTO, PROGRAM, APERTURE PRIORITY, SHUTTER PRIORITY,
MANUAL, MySET, MOVIE CLIP, SCENE) mode can be set up by using the camera buttons.
¡ÜUsed for turning the camera’s power on or off.
¡ÜIf there is no operation during the specified time, the
cameras power will be turned off automatically to save
battery life. Refer to page 113 for more information about
the auto power off function.
POWER button
¡ÜIn MOVIE CLIP mode : Pressing the shutter button down
fully starts the process for...

¡¶36¡·
¡áYou can select various shooting modes.
¡áDrive mode
¡ÜSingle shooting (         ) : Takes one picture only.
¡Ü
Continuous shooting (         ) : Images will be taken continuously until the shutter button is
released.
¡ÜHigh speed continuous shooting (         ) : This takes 2.5 shots per second when the
shutter is pressed down and held.
¡ÜUltra High speed continuous shooting (         ) : This takes 10 shots per second, when the
shutter is pressed down and held. After
completing the continuous...

¡¶37¡·
¡ÜHow to set the AEB
1. Select the AEB icon by rotating the Rear jog dial (JOG2)
2. Select a desired exposure value by rotating the Front 
jog dial (JOG1).
- The pre-view image will display on the Rear LCD as 
the exposure value is changed.
3. Press the OK or Shutter button to set the exposure value. 
4. Press the shutter button to capture an image.
You can take 3 or 5 shots according to the selected exposure value.
¡Ø
¡ÜHow to set the AFB
1. Select the AFB icon by rotating the Rear jog dial...

¡¶38¡·
¡ØYou can’t select the WBB icon in the Auto recording mode and movie clip mode. ¡ÜHow to set the WBB
1. Select the WBB icon by rotating the Rear jog dial
(JOG2)
2. Select a desired white balance value by rotating 
the Front jog dial (JOG1).
- The pre-view image will display on the Rear LCD
as the white balance value is changed.
3. Press the OK or Shutter button to set the white balance
value.
4. Press the shutter button to capture an image.
You can take 3 or 5 shots depending on the selected white...

¡¶39¡·
¡ÜHow to use the interval shooting
1. Select the Interval shooting icon [           ] by rotating 
the Rear jog dial (JOG2).
2. Press the shutter button to capture an image.
Images are taken at a set interval.
- After taking a picture, the camera power is turned off
automatically.
- After a set time, the camera power is turned on
automatically and the second image is taken.
- Images are taken up to a set number of shots at fixed intervals.
3. After completing the interval shooting, the camera...

¡¶40¡·
¡áThis function is often used when the photographer
would also like to be in the image.
¡áHow to use the Self-timer/ Remote button
1. Press the self-timer button and a self-timer icon will
display on the LCD.
2. Select a desired self-timer by rotating the Rear jog dial
(JOG2).
3. Press the OK button to set the setting.
- Selecting a self-timer :
An image will be taken after the specified time has
elapsed and the self-timer function will be maintained.
- Selecting a remote control function :
An...