Samsung Digimax Pro815 User Manual

¡¶11¡·
To p
Drive button
Self-timer
button
Power button/
Power lampTop LCD
ISO button
Metering button
Hot shoe
Flash status lamp 
Mode dial
Speaker
Shutter button
EVC (Exposure Value
Compensation) ring
Focus ring
Zoom ring
Zoom scale indicator
Flash
Hot shoe cap
Identification of features
Downloaded From camera-usermanual.com Samsung Manuals 

¡¶12¡·
Back
ConnectorsMemory card slot
Strap eyelet
AV port
USB connector port
DC-in port
Finder LCD
Diopter adjustment ring
Card in use lamp
LCD button
Display/	Information	button
Connector cover
SCENE/ 
Delete button
Back LCD
Memory card slot cover
Memory card
eject lever
Memory card slot
5-function button
Play mode button
Digital zoom/
Enlargement button
Strap eyelet
AE Lock (AE-L) button/
Thumbnail button
Rear Jog dial (JOG 2)
Identification of features
Downloaded From camera-usermanual.com Samsung...

¡¶13¡·
Bottom
Battery chamber
Battery chamber
cover & lock
Tripod socket
Battery holder
Battery chamber
Diopter
adjustment
ring
Identification of features
Downloaded From camera-usermanual.com Samsung Manuals 

¡¶14¡·
¡áSelf-timer lamp
¡áCamera Status Lamp
Icon Status Description
- For the first 7 seconds, the lamp blinks at 1 second intervals.
- For the final 3 seconds, the lamp blinks quickly at 0.25-second
intervals.
A picture will be taken after about 10 seconds and 2 seconds later
a second picture will be taken.
Blinking
Blinking
Blinking
Lamp Colour Status Description
On Power on
Blinking When the LCD is turned off
Charging is complete
(Pressing the shutter button half way down)
The flash is being...

¡¶15¡·
¡áThere are two ways in which to provide the camera with power. You can use battery or
alternatively, you can use the AC adaptor.
¡áSpecification of SLB-1974 rechargeable battery
¡ØTo buy the exclusive AC adapter (SAC-81, DC 8.4V 1.5A), contact your nearest Samsung
dealer or Samsung service centre.
Connecting to a Power Source
¡ÜPlease ensure that you use the exclusive battery with the correct specification for the
camera. Failure to do may affect your warranty.
¡ÜWhen you disconnect the AC...

¡¶16¡·
Using the battery: If the camera does not turn on after you have inserted battery,
please check whether the battery is inserted with the correct
polarity (+/-).
1. Turn the battery chamber lock in the direction
of the arrow (OPEN) and open the battery
chamber cover.
2. Insert the battery taking note of the polarity
(+/-).
3. Close the battery chamber cover and turn
the battery chamber lock in the direction of
the arrow (CLOSE).
Before using the camera
Downloaded From camera-usermanual.com Samsung...

¡¶17¡·
Battery status Battery indicator
The battery is 
fully chargedPrepare new
batteryThere is low battery capacity
(Warning indicator will display).There is no battery capacity 
(Red colour : Change the battery).
¡áThere are 4 indicators for battery condition that are displayed on the LCD monitor.
Removing the battery
1. 
Turn off the camera. Turn the battery chamber lock in the direction
of the OPEN mark and open the battery chamber cover.
2. Move the battery holder aside and the battery
will be...

¡¶18¡·
1. Plug the AC cord’s power plug into the wall outlet and insert the AC cord into the charger.
¡ØIf the charging LED doesn’t blink as red or blinks as
yellow, please check whether the battery is inserted
with the correct polarity (+/-).
¡ØCheck the battery charging status with the Charging
LED of the charger.
Status LED
Being charged Red LED is on
Charging is complete Green LED is on
Charging is paused Yellow LED is on
Charging error Yellow LED is blinking
Charging LED ¡áHow to charge the...

¡¶19¡·
¡ÜAlways turn off the power before taking the AC adapter out of the mains supply.
¡ÜAs with all mains powered devices, safety is important. Ensure that neither the camera
nor adapter comes into contact with water or metallic materials.
¡ÜPlease ensure that you use an AC adapter (SAC-81, DC 8.4V) with the correct
specification for the camera. Failure to do so may affect your warranty.
DANGER
If you have access to a mains supply, using an AC
Adapter (SAC-81, DC 8.4V) allows the camera to
be used for...

¡¶20¡·
¡ÜBe sure to format the memory card (see p.116) if you are using a newly purchased memory
for the first time, if it contains data that the camera cannot recognise, or if it contains images
captured with a different camera.
¡ÜTurn off the camera power whenever the memory card is being inserted or removed.
¡ÜRepeated use of the memory card will eventually reduce the memory cards performance.
Should this be the case, you will need to purchase a new memory card. Wear and tear on the
memory card is not...