Samsung CLX 6250FX User Manual

Introduction_ 1
1.introduction
This chapter gives you an ov erview of your machine:
This chapter includes:
•Machine overview
• Control panel overview •
Understanding the Status LED
• Introducing the useful buttons
  
Machine overview
Front view
 
1Document feeder cover 
12Front door
 
2Document feeder width 
guides 
13Document output tray
 
3Document feeder input tray 
14Control panel
 
4Document feeder output tray 
15Multi-purpose tray paper 
width guides
 
5USB memory port 
16Toner cartridges 
6Front...

Introduction_ 2
Rear view
 
1Control board cover 
7Extension telephone socket 
(EXT)
 
2Rear door 
8Telephone line socket 
3Cable organizer 
9Optional tray 2 cable connector 
4Power receptacle 
10Network port 
5Power-switch 
11USB port
 
6Handle 
12IEEE 802.11 b/g Wireless LANa
a. Optional device.
Downloaded From ManualsPrinter.com Manuals 

Introduction_ 3
Control panel overview
 
1ID Copy You can copy both sides of an ID Card such as a 
dri ver’s license to a single side of paper (See ID card copying on page 2 ).
 
2Direct USB Allows you to directly print files stores on a USB memory 
device  when it is inserted into the USB memory port on your 
machine (See  About USB memory device on page  1 ).
 
3Duplex Allows you to print documents on both sides of the paper.  
4Display screen
Shows the current status and 
p rompts during an...

Introduction_ 4
 
20StartStarts a job in black or color mode.
Downloaded From ManualsPrinter.com Manuals 

Introduction_ 5
Understanding the Status LED
The color of the Status  indicates the machines current status.
StatusDescription
Off •The
 machine is off-line.
Green Blinking •Whe
n the backlight slowly blinks, the machine 
is receiving data from the computer.
• Whe
n the backlight blinks rapidly, the 
machine is printing data. 
On The machine is on-line and can be used.
Red Blinking •A 
minor error has occurred and the machine is 
waiting for the error to be cleared. Check the 
display message. When the...

Getting started_ 1
1.getting started
This chapter gives you step-by-step  instructions for setting up the USB connected machine and software.
This chapter includes:
•Setting up the hardware
• Printing a demo page
• Supplied software •
System requirements
• Installing USB connected machine’s driver
• Sharing your machine locally
  
Setting up the hardware
This section shows the steps to set up the hardware, as is explained in the 
Quick Install Guide. Make sure you read the Quick Install Guide first and...

OSContents
Windows •Prin
ter driver:  Use this driver to take full advantage of 
you
r machine’s features.
• PostScript Printer 
 Driver: Use the PostScript driver to 
prin
t documents with complex fonts and graphics in the PS 
language. (PostScript printer description file is included.)
• Scanner driver:  TWAIN and Windows Image Acquisition 
(WIA) d

rivers are available for scanning documents on 
your machine.
• Smart Panel:  This program allows you to monitor the 
machi

ne’s status and alerts you...

Getting started_ 3
Macintosh
OPERATING 
SYSTEMRequirements (recommended)
CPURAMfree HDD space
Mac OS X 
10.3 ~ 10
 .4•
Intel 
Processors
• Powe
rPC G4/ 
G5 •
12
8 MB for a 
PowerPC based 
Mac (512 MB)
• 51
2 MB for a 
Intel-based Mac 
(1 GB) 1 GB
Mac OS X 
10.5 •
Intel 
Processors
• 86
7 MHz or 
faster Power 
PC G4/ G5 512 MB (1 GB)
1 GB
Mac OS X 
10.6 •
Intel 
Processors 1 GB (2 GB)
1 GB
Linux
ItemRequirement (recommended)
Operating 
sys
 tem RedHat® Enterprise Linux WS 4, 5 (32/64 bit)
Fedora Core 2~10...

Getting started_ 4
Installation and  Install Software Only . The Custom 
Installation allows you to select the machine’s connection and 
choose individual components to install. The  Install Software 
Only  allows you to install the supplied software, such as Smart 
Panel. Follow the instruction in the window.
• Admin
istrator Installation provides convenient installation 
methods useful for administrators (See  Administrator’s Guide 
(Windows only) on page  1 ).
4. Read
  License Agreement , and select...

Getting started_ 5
install.
11. Whe
n the message which warns that all applications will close on your 
computer appears, click  Continue.
12. Select  Typ
 ical installation for a local printer  and then click OK.
 If you select  Typical installation for a network printer  during the 
machine driver installation, the  SetIP program automatically runs. 
If the machine has already configured network infomation, close 
the SetIP program. Go to the next step.
13. After th
e installation is finished, click...