Samsung CLX 3160FN User Manual

13.9   
Replacing the Waste Toner Container
The life of the waste toner container unit is approximately 1,250 pages 
for full color 5% image printing or 5,000 pages for black printing. When 
the life span of the waste toner container has expired,  Replace/Install 
Waste Toner Tank  appears on the display of the control panel, 
indicating the waste toner container needs to be replaced. Otherwise 
your printer stops printing.
To replace the waste toner container:
1 Turn the machine off, then wait a few...

13.10   
Maintenance Parts
To avoid print quality and paper feed problems resulting from worn parts 
and to maintain your printer in top working condition the following items 
will need to be replaced at the specified number of pages or when the 
life span of each item has expired.
Samsung  highly recommends that an authorized service provider, 
dealer or the retailer where you bought printer performs this 
maintenance activity.
Checking replaceables
If you experience frequent paper jams or printing...

13.11   
5 Align the left end of the ADF roller with the slot and push the right 
end of the roller into the right slot. Rotate the bushing on the right 
end of the roller toward the document input tray.
6 Close the ADF cover.
Managing your machine from the website
If you have connected your machine to a network and set up TCP/IP 
network parameters correctly, you can manage the machine via 
Samsung’s  SyncThru™ Web Service , an embedded web server. Use 
SyncThru™ Web Service  to:
• View the machine’s...

14.1   
14 Troubleshooting
This chapter gives helpful information for what to do if you encounter an 
error.
This chapter includes:
• Clearing document jams
• Clearing paper jams
• Understanding display messages
• Solving other problems
Clearing document jams
When an original jams while passing through the ADF,  Document Jam 
appears on the display.
1 Remove any remaining pages from the ADF.
2 Open the ADF cover.
3 Pull the jammed paper gently out of the ADF.
1ADF cover
1
4Close the ADF cover. Then load...

14.2   
Roller misfeed
1 Open the scanner lid.
2 Seize the misfed paper, and remove the paper from the feed area 
by carefully pulling it to the right using both hands.
3 Close the scanner lid. Then load the removed pages back into the 
ADF.
Clearing paper jams
When a paper jam occurs,  Paper Jam appears on the display. Refer to 
the table below to locate and clear the paper jam.
MessageLocation of jamGo to
Paper Jam 0
Open/Close Door In the paper feed area (tray 1, 
optional tray 2) the next 
colume,...

14.3   
In the optional tray 2
1 Pull the optional tray 2 out of the machine.
2 Remove the jammed paper from the machine.
3 Insert the tray 1 into the machine until it snaps into place. Printing 
automatically resumes.
If the paper does not move when you pull, or if you do not see the 
paper in this area, go to the next step.
4Open the jam cover in the optional tray 2.
5 Pull the jammed paper out in the direction shown.
6 Close the jam cover. Printing automatically resumes.
Downloaded From...

14.4   
In the mamual feeder
1 Pull the tray 1 out.
2 Push the manual feeder tab down.
3 Pull the Jammed paper out of the manual feeder.
4 Insert the tray 1 into the machine until it snaps into place. Printing 
automatically resumes.
In the paper exit area
1Open and close the front cover. The jammed paper is automatically 
ejected from the machine.
2 Gently pull the paper out of the output tray. 
If you do not see the jammed paper or if there is any resistance 
when you pull, stop and go to the next...

14.5   
5 Open the fuser door. 
6 Locate the jammed paper and pull it out.
7 Close the fuser door.
8 Close the rear cover. Printing automatically resumes.
Tips for avoiding paper jams
By selecting the correct media types, most paper jams can be avoided. 
When a paper jam occurs, follow the steps outlined on page 14.2. 
• Follow the procedures on page 5.6. Ensure that the adjustable guides 
are positioned correctly.
• Do not overload the tray. Ensure that the paper level is under the  brackets of the...

14.6   
[Stop Pressed] Stop/Clear
 has 
been pressed during 
an operation. Try again.
Cancel?
 Ye s   
Your machine’s 
memory has 
become full while 
trying to store an 
original into memory.
To cancel the fax job, 
press the  OK button 
to accept  Yes. 
If you want to send 
those pages that 
have been 
successfully stored, 
press the  OK button 
to accept  No. You 
should send the 
remaining pages 
later, when memory is 
available.
Connection Error Connection with the 
SMTP server failed. Check the...

14.7   
Mail Exceeds 
Server Support The mail size is 
larger than the 
supported size by 
SMTP server. Divide your mail or 
reduce the resolution.
Memory FullThe memory is full.
Delete unnecessary 
fax jobs and 
retransmit after more 
memory becomes 
available. 
Alternatively, split the 
transmission into 
more than one 
operation.
Manual Feeder 
Paper Empty There is no paper in 
the manual feeder. Load paper in the 
manaul feeder.
Manual Feeder 
Paper Jam 0 Paper has jammed 
in the feeding area 
of...