Samsung CLP 660ND User Manual

iv
Canadian Radio Interference Regulations
This digital apparatus does not exceed the Class B limits for radio noise 
emissions from digital apparatus as  set out in the interference-causing 
equipment standard entitled  “Digital Apparatus”, ICES-003 of the Industry 
and Science Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques 
applicables aux appareils numériques de  Classe B prescrites dans la norme 
sur le matériel brouilleur: “Appareils Numériques”, ICES-003 édictée par...

v
Original SSLeay License
Copyright (C) 1995-1998 Eric Young ([email protected]) All rights 
reserved.
This package is an SSL implementation written by Eric Young 
([email protected]). The implementation was written so as to conform with 
Netscapes SSL.
This library is free for commercial and non-commercial use as long as the 
following conditions are aheared to. The  following conditions apply to all code 
found in this distribution, be  it the RC4, RSA, lhash, DES, etc., code; not just 
the SSL code....

1.1   
1 Introduction
Thank you for purchasing this Samsung color printer. 
This chapter includes:
• Special features
• Machine overview
• Control panel overview
• Understanding the Status LED
• Understanding the menu map
Note
Some features are optional . Check the specifications 
sections. (See Specific ations on page 10.1.)
Special features
Your new machine is equipped with special features.
Print with excellent quality and speed
• You can print in a full range of colors using cyan, magenta, yellow,...

1.2   
Machine overview
These are the main components of your machine.
Front view 
• The figure above shows your machine with the availabl e accessories. (See page 8.1 for more information)
• The symbol 
* denotes an optional device.
Note 
• All illustrations on this user’s guide may differ from your machine depending on its options or models.
• The surface of the output tray may become  hot if you print a large number of pages at once. Make sure that you do not touch the surface, and do 
not allow...

1.3   
Rear view 
• The figure above shows your machine with the available accessories.
• The symbol * denotes an optional device.
1
USB port5power switch
2network port6power receptacle
315-pin Optional tray connection*7control board cover  (Memory module, see page 9.1 for 
more information)
4 handle  (Use these handles to move your machine.)
Downloaded From ManualsPrinter.com Manuals 

1.4   
Control panel overview
1
Display : Shows the current status and prompts during an 
operation.5 Left/right arrow : Navigates available values by moving to the next 
or previous options.
2 Toner colors : The toner colors shown below the LCD display work 
together with the display messages.  See Status LED with the toner 
cartridge messages on page 1.5.6 OK: Confirms the selection on the display.
3Status: Shows the status of your machine. (See Understanding the 
Status LED on page 1.5 for more...

1.5   
Understanding the Status LED
The color of the  Status LED indicates the mach ines current status.
Note 
Always check the message on the di splay to solve the problem. 
The instruction in the Troubleshooting section will guide you to 
operate the machine properly. See page 7.1 for more 
information.
StatusDescription
Off • The machine is powered off.
Green Blinking • When the green LED slowly blinks, the  machine is receiving data from the computer.
• When the green LED blinks rapidly, the...

1.6   
Understanding the menu map
The control panel provides access to various menus to set up the 
machine or to use the machines functions. Refer to the following 
diagram. 
Accessing menus
The next steps show how to print the menu map of this machine, and they 
are the general way to select menus and configure your machine.
1 Make sure your machine is properly connected with all the 
necessary cables, and turn on the machine.
2 Press  Menu on the control panel, until  you see the menu (ex....

1.7   
Description on each menu
The following tables provide the information on each menu.
Note 
The symbol * denotes an optional menu depending on 
machines.
Information 
Layout 
MenuDescription
Menu Map You can print the menu map which shows the 
layout and current settings of this machine.
Configuration You can print the machines current 
configuration. 
Demo Page The demo page is a sample of the machine’s 
imaging capabilities.
PCL Font List * You can print the PCL font list.
PS Font List * You can...

1.8   
Graphic 
System Setup 
Paper Source You can select the tray to process the print job. If 
you select Auto, your machine supplies the 
paper from the multi-pur pose tray first, then the 
tray 1, and tray 2 for the last. So if any tray is 
empty, then the machine tries to search the 
paper from the next available tray. (See page 3.5 
for more information)
Tray Chaining When you select any  other value except Auto 
from  Paper Source  and the selected tray is 
empty, you can set the machine to...