Samsung CLP 550N User Manual

USING THE CONTROL PANEL2.17
2
PostScript Menu
This menu provides you with the Print PS Error menu item.
(*: the default setting)  Point Size
When you select from PCL8 to PCL44 from 
the Typeface menu, you can determine 
the font size by setting the height of the 
font characters. 
Courier
This item lets you select the version of 
Courier font to use.
ItemExplanation
Print PS ErrorYou can select whether or not your printer 
prints an error list when a PS error occurs.
• Select On to print PS 3 emulation...

USING THE CONTROL PANEL2.18
Network Menu
This menu lets you configure the network interface card 
installed in your printer according to how the network is set up. 
You can upgrade the firmware of the network interface card, and 
print the configuration.
NOTE: This menu only appears when a Network Card is fitted (CLP-
550N or CLP-550 with optional Network card).
(*: the default setting)
ItemExplanation
Config NetworkSets whether or not you want to 
configure the network. 
If you select Yes, you can...

USING THE CONTROL PANEL2.19
2
IP AddressYou can select this item only when you 
set IP Get Method to Static. This 
item lets you enter the IP address 
manually. Press the scroll button to set 
the value of the 1st byte between 1 
and 255, and then press the Enter 
button. 
Set the value for the 2nd, 3rd and 4th 
byte the same way.
Subnet MaskYou can set this item only when you set 
IP Get Method to Static. This item 
lets you enter the subnet mask 
manually. Press the scroll button to set 
the value of...

USING THE CONTROL PANEL2.20
AppleTalk
This item lets you select whether or not 
you use the AppleTalk protocol. Select 
On to use the protocol 
NetwareYou can select whether or not you want 
to use the Netware protocol. 
If you select On, you can access the 
Config Netware menu item.
In the Config Netware menu, you can 
specify the frame type parameter used 
on your network.
Config NetwareYou can set this item only when you set 
Netware to On. This item lets you 
select whether or not you set the frame...

USING THE CONTROL PANEL2.21
2
Reset NetworkThis item reboots the network interface 
card.
Default SetThis item performs a simple reset and 
restores the factory default settings for 
the network configuration. 
Print Net CFGThis item prints a page showing the 
network parameters you set. 
ItemExplanation
*ownloadedMKromM~anualsPrinter9comM~anuals 

USING THE CONTROL PANEL2.22
MEMO
Downloaded From ManualsPrinter.com Manuals 

2
This chapter describes how to use the printer’s control 
panel.
This chapter includes:
• Understanding the Control Panel
• Using Control Panel Menus
USING THE CONTROL PANEL...

USING PRINT MATERIALS3.2
Choosing Paper and Other Materials
You can print on a variety of print materials, such as plain paper, 
envelopes, labels, transparencies and so on. See “Printing on 
Special Print Materials” on page 3.14. To get the best possible 
print quality, use only high-quality copier-grade paper.
When you choose print materials, consider the following:
•Desired outcome: The paper you choose should be 
appropriate for the project.
•Size: You can use any size paper that fits easily within...

USING PRINT MATERIALS3.3
3
Guidelines for Paper and Special Materials
When selecting or loading paper, envelopes, or other special 
materials, keep these guidelines in mind:
• Attempting to print on damp, curled, wrinkled, or torn paper 
can cause paper jams and poor print quality.
• Use cut-sheet paper only. You cannot use multi-part paper.
• Use only high-quality, copier grade paper for the best print 
quality. 
• Do not use paper with irregularities, such as tabs or staples.
• Do not attempt to load...

USING PRINT MATERIALS3.4
Loading Paper
Proper paper loading helps prevent paper jams and ensures 
trouble-free printing. Do not remove the paper tray while a job 
is printing. Doing so may cause a paper jam. See “Sizes and 
Capacities” on page 3.2 for acceptable paper capacities for each 
tray. 
Using Tray 1 
The tray, Tray 1, can hold a maximum of 250 sheets of plain A4 
and letter-sized paper.
You can purchase an optional tray, Tray 2, and attach it below 
Tray 1, to load an additional 500 sheets of...