Samsung CLP 320 User Manual

Basic setup_ 51
3.Select Printer and click Properties…
4.Click Advanced tab.
5.Select tray (source) and its options, such as paper size and type.
6.Press OK.
Using the power saving feature
When you will not be using the machine for a while, you can use this feature 
to save power.
You change power save in Printer Settings Utility.
1.Double-click the Smart Panel icon on the Windows task bar (or 
Notification Area in Linux). You can also click Smart Panel on the status 
bar in Mac OS X (See 
Using the...

Media and tray_ 52
6.media and tray
This chapter introduces you how to load or iginals and print media into your machine.
This chapter includes:
•Selecting print media
• Changing the tray size
• Loading paper in the tray •
Printing on special media
• Setting the paper size and type
• Using the output support
  
Selecting print media
You can print on a variety of print me dia, such as plain paper, envelopes, 
labels, and transparencies. Always use print media that meets the 
guidelines for use with your...

Media and tray_ 53
Changing the tray size
To load different sizes of paper, such as Legal-sized paper, you need to 
adjust the paper guides to extend the paper tray.
To change the tray size to other size, you must adjust the paper 
l

ength/width guides properly.
3
2
1
4
1 Paper extend lever
2Paper cover
3Paper length guide
4Paper width guide
1. Pull the tray out of the machine. Open the paper cover and remove 
paper from the tray if necessary. 
2.Pressing and unlatching the guide lock in the tray, pull...

Media and tray_ 54
•Do not use a paper with more than 6 mm (0.24 inch.) curl.
5. Close the paper cover.
6.Slide the tray back into the machine until it clicks.
7. Set 
the paper type and size for the tray ( Setting the paper size and 
type on page  58).
 If you experience problems with  paper feeding, check whether the 
paper meets the media specifications. Then, try placing one sheet 
at a time in tray (See  Print media specifications on page  92 or 
see  Printing on special media on page  56 ).
The...

Media and tray_ 55
6.Insert the tray back into the machine.
7. To pri
nt in application, open an  application and start the print menu.
8. Ope
n  Printing Preferences  (See Opening printing preferences on 
page  60 ).
9. Pr
ess the  Paper tab in  Printing Preferences  and select an appropriate 
paper type, size and source.
10. Pr
ess  OK.
11. Sta
rt printing in application.
 If you experience problems with  paper feeding, check whether the 
paper meets the media specificati on. Then, try placing one...

Media and tray_ 56
guide.
If the paper that you need to print is shorter than length 222 mm 
(8.74 inches), press and unlatch the guide lock in the tray, push the 
tray in manually. Adjust the paper length guide and paper width 
guide.
1
2
 •Do not push the paper width guides far enough to cause the 
materials to warp.
• If 
you do not adjust the paper width guides, it may cause 
paper jams.
•Do not use a paper with more than 6 mm (0.24 inch.) curl.
4. Close the paper cover.
5.Slide the tray back into th...

Media and tray_ 57
•CardStock:  105 to 163 g/m2 (28 to 43 lbs bond) cardstock.
• Bo
nd:  105 to 120 g/m2 (28 to 32 lbs bond) bond.
• Arch
ive:  70 to 90 g/m2 (19 to 24 lbs bond). If you need to keep the 
print-out for a long time, such as for archives.
• Gl
ossy Photo:  111 to 220 g/m2 (30 to 58 lbs bond) glossy photo paper. 
• M
atte Photo:  111 to 220 g/m2 (30 to 58 lbs bond) matte photo paper. 
Envelopes
Successful printing on envelopes depends upon the quality of the 
envelopes. 
To print an...

Media and tray_ 58
•Do not run a sheet of labels through the machine more than once. The 
adhesive backing is designed for only a single pass through the 
machine.
• Do 
not use labels that are separating from the backing sheet or are 
wrinkled, bubbled, or otherwise damaged.
Card stock/Custom-sized paper
•Do not print on media smaller than 76  mm (3.00 inches) wide or 
152
.4  mm (6.00 inches) long.
• In
 software applications, set margins at least 6.4  mm (0.25 inches) away 
from the edg
es of the...

Printing_ 59
7.printing
This chapter explains common printing tasks.
This chapter includes:
•Introducing useful software program
• Printer driver features
• Basic printing
• Opening printing preferences
• Using help
• Using special print features •
Changing the default print settings
• Setting your machine as a default machine
• Printing to a file (PRN)
• Macintosh printing
• Linux printing
  
 The procedures in this chapter are mainly based on Windows XP.
Introducing useful  software program
Samsung...

Printing_ 60
1.Open the document you want to print.
2. Select  Print from 
 the File  menu. The  Print window appears. 
3. Select y
 our machine from the  Select Printer list.
You can select the basic print setti ngs including the number of copies 
and the print range from the  Print window. 
 To take advantage of the printer features provided by your printer 
driver, click  Properties or  Preferences in the application’s  Print 
window to change the print setting (See  Opening printing 
preferences on...