Samsung Cht 500 Instruction Manual

Using the Tape Counter
GB
41
VCR
The tape counter:
Indicates the elapsed time in the play and record
modes (hours, minutes and seconds)
Is reset when a cassette is inserted in the DVD-VCR
Allows you to find the beginning of a sequence easily
☛If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used. 
1Insert a cassette in your DVD-VCR.
2To set the tape counter to zero at the beginning of a sequence:Press INFO. twice to display the counterPress CLEAR when...

Connecting an RCA Audio/Video Input Cable
GB
42
VCR
You can connect other audio/video equipment to your DVD-VCR
using audio/video cables if the appropriate outputs are available
on the equipment chosen.
Examples
:You wish to copy a video cassette with the help of
a second VCR (see page 43).
You wish to play back and/or copy pictures taken
with a camcorder (see page 43).
☛Make sure that both the television and the DVD-
VCR are switched offbefore connecting the cables.
1Connect one end of the RCA video...

Recording from Another VCR or Camcorder
GB
43
VCR
You can copy a cassette to your DVD-VCR from another video
source, such as another VCR or a camcorder.
☛It is an infringement of copyright laws to copy
prerecorded cassettes or to re-record them in any form
without the permission of the owners of the
corresponding copyright.
1Connect the DVD-VCR, fromwhich the cassette is to be copied,  
to the appropriate SCART input connectors on  
the rear of your DVD-VCR, as indicated on page 12.
2Insert a blank...

GB
44
Audio Dubbing a Pre-recorded Cassette
With the Audio Dubbing function, you erase the previously
recorded sound and replace it with a new soundtrack from:
A CD, DVD
A microphone connected to a sound system
A cassette player
Restriction
:
Audio dubbing is applicable only to the longitudinal audio track
(normal audio).
1Connect an RCA audio cable to the appropriate output on your
sound system (cassette player for example).
2Connect the other end of the RCA audio cable to the audio input
connectors...

GB
45
Using the TV Buttons on the Remote Control 
Your DVD-VCR remote control will work with Samsung
televisions and compatible brands. 
To determine whether your television is compatible, follow the
instructions below.
1Switch your television on.
2Point the remote control towards the television.
3Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing the
appropriate numeric buttons.
Brand Codes Brand Codes
SAMSUNG 01 to 06 PHILIPS 02, 20, 22
AKAI...

GB
46
Choosing a ConnectionDVD
The following show examples of connections commonly used to connect the DVD -VCR player with
a TV and other components. It is only available for DVD. The VCR out can not watch by this
connection. 
Connection to an Television
Television
Super Jack Component
Jack
S-VIDEO OUT
COMPONENT VIDEO OUT
Television
or
 

GB
47
Setting Up the Language FeaturesDVD
If you set the player menu, disc menu, audio and subtitle language
in advance, they will come up automatically every time you watch
a movie.
This function changes the text language only on the disc
menu screens.
1With the unit in Stop mode, press the MENU button.
2Select DVDusing #,❷buttons, then OK or ❿button
3Select Language Setupusing #,❷buttons, then press the 
OK or 
❿button. 
4Select Disc Menuusing #,❷buttons, then press the OK or ❿
button. 
5Use the...

GB
48
Setting Up the Language Features DVD
1With the unit in Stop mode, press the MENU button.
2Select DVDusing ,❷buttons, then OK or ❿button. 
3Select Language Setupusing ,❷buttons, then press the OK 
or 
❿button.
4Select Audiousing ,❷buttons, then press the OK or ❿
button.
5Press the ,❷buttons to select ‘English’ .
- Select “Original” if you want the default soundtrack language to
be the original language the disc is recorded in.
- Select “Others” if the language you want is not listed.
6Press the OK...

GB
49
Setting Up the Audio Options
1With the unit in Stop mode, press the MENU button.
2Select DVDusing ,❷buttons, then OK or ❿button.
3Select Audio Setupusing ,❷buttons, then press the OK or❿button.
4Use the ,❷buttons to select the desired item. 
Then press the OK or ❿button.
Dynamic Compression
-On : To select dynamic compression.- Off : To select the standard range.
Center SPK Time Delay (See Page 67)Surround SPK Time Delay (See Page 67) 
➢How to make the SETUP menu disappear or return to 
menu...

GB
50
Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs
that have been assigned a rating - which helps you control the
types of DVDs that your family watches. 
There are up to 8 rating levels on a disc.
1With the unit in Stop mode, press the MENU button.
2Select DVDusing ,❷buttons, then OK or ❿button.
3Select Parental Setupusing ,❷buttons, then press the OK or❿button.
4Use OK or ❿to select Yesif you want to use a password. 
The Ok Passwordscreen appears.
5Ok...