Samsung Cht 500 Instruction Manual

Recording a Programme with Automatic Stop
GB
31
VCR
This function enables you to record up to nine hours (LP) of
programmes.
Your DVD-VCR stops automatically after the requested length of
time.
1Switch on the television.
2To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
3Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive...

GB
32
Using the ShowView 
Before presetting your DVD-VCR:
Switch on both the television and your DVD-VCR
Check that the date and time are correct
Insert the cassette on which the programme is to be
recorded (safety tab intact)
Up to six programmes can be preset.
1To enter a ShowView, press the TIMER button. 
Press the #or❷!and OK or ❿!buttons to select ShowView
Result: A message is displayed to allow you to enter theShowViewcode.
☛If all six programmes have been set, the message Timer
is fullis...

Modifying ShowView Programming
GB
33
VCR
If you wish to correct the programme displayed or modify certain elements, such as the recording speed,
you can do so before you press RETURN a second time to confirm.
If you wish to... Then...
Select an input source other Press the ➛or ❿buttons, until the PRselection flashes.
than the tuner (AV1, AV2 or AUX)Press the #or❷button one or more times to change the 
input source selection.
Result
: The programme number is replaced by:
•The AV1, AV2 or AUX  source...

Using the Timer Programming Feature
GB
34
The Timer Programming feature allows you to preset the DVD-
VCR to record a programme up to one month before that
programme is to be broadcast. Up to six programmes can be
preset.
☛Before presetting a recording, check that the date and
time are correct. 
1Insert the cassette and press TIMER on the remote control.
Result
: The Timer Method is displayed. 
2Press the OK or ❿button to select Standard option.
Result
: The TIMER PROGRAMMINGmenu is displayed. 
3Press...

Checking a Preset Recording
Cancelling a Preset Recording
GB
35
VCR
VCR
You can check your preset recordings:
When you have finished presetting the DVD-VCR
If you have forgotten which programmes will be
recorded
1Press TIMER on the remote control.
Result: The Timer Method is displayed. 
2Press the OK button to select Standard option.
Result: The  TIMER PROGRAMMINGmenu is displayed.
3Press the #or❷buttons to select the required programme.
4Press the ➛or ❿buttons to select and change any values as...

GB
36
This function allows you to play back any pre-recorded cassette.
1Switch on both the television and your DVD-VCR.
2Insert the video cassette to be played. If the safety tab on the
cassette is intact, press 
❿ll.
Otherwise, the cassette is played automatically.
➢When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto
Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewind automatically.
NTSC tapes can be played...

Selecting the Audio Output Mode
GB
37
VCR
Playing a Cassette in Slow Motion 
You can select the mode in which the sound is reproduced on the
loudspeakers and AV outputs. The following options are
available.
Option Description
L Used to listen to the sound on the left Hi-Fi channel.
R Used to listen to the sound on the right Hi-Fi channel.
MIX Used to listen to the mixed sound of the Hi-Fi and
normal channels.
MONOUsed to listen to the sound on the normal mono
channel.
L R Used to listen to Hi-Fi stereo...

Playing a Sequence at Variable Speeds
GB
38
VCR
You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
Example
: You wish to analyze a sportsperson’s technique,
movement by movement.
The Shuttle function is available on the Remote control
➢No sound is heard when playing a sequence at variable
speeds.
1Press:❿llduring playbackSHUTTLE () to play the cassette forwards
2Each time you press a SHUTTLE button, the speed is changed
as shown in the following...

GB
39
Searching for a Specific Sequence
Each time you record a cassette on this DVD-VCR, an “index”
is automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on
the direction selected, the indexes are numbered as follows:
➢This DVD-VCR uses a standard indexing system
(VISS). 
As a result, it will recognize any indexes marked by
other VCRs using the same
system and vice versa.
Go to...

Searching for a Specific Sequence
GB
40
VCR
Intro Scan
1After pressing the SEARCH, press the corresponding #or❷buttons, until the Intro Scanoption is selected.
2Press the OK or  ❿!.
3Press the ➛➛or ❿❿buttons depending on the direction 
where your desired programme is located. 
4When an Index mark is found the DVD-VCR will playback the
tape for 5 seconds, after which it will continue searching for the
next Index mark.
5If you want to watch the tape from a particular Index, simply
press❿II. 
Index Skip...