Samsung Camera Dv150f User Manual

							Sending photos or videos via email
Wireless network  120
If you lost your password, you can reset it by selecting Reset on the password 
setting screen. When you reset the information, the previously saved user’s setting 
information, email address, and recently sent email list will be deleted.
Changing the email password
1 On the Home screen, scroll to .
2 Select .
• The camera will automatically attempt to connect to a WLAN via the most 
recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will search for 
available AP devices. (p.108)
3 Press [m].
4 Select Change Password .
5 Enter your current 4-digit password.
6 Enter a new 4-digit password.
7 Enter the new password again.
8 When the pop-up appears, press [o].
Sending photos or videos via email
You can send photos or videos stored on the camera via email. For information 
about entering text, refer to "Entering text". (p.112)
1 On the Home screen, scroll to .
2 Select .
• The camera will automatically attempt to connect to a WLAN via the most 
recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will search for 
available AP devices. (p.108)
3 Select the Sender box, enter your email address, and then select 
Done.
• If you have previously saved your information, it will be inserted 
automatically. (p.119)
• To use an address from the list of previous senders, select  “  an address.
4 Select the Receiver box, enter an email address, and then select 
Done.
• To use an address from the list of previous recipients, select  “  an address.
• Select  to add additional recipients. You can input up to 30 recipients.
• Select  to delete an address from the list.
5 Select Next . 
						

							Sending photos or videos via email
Wireless network  121
6 Scroll to files to send, and then press [o].
• You can select up to 20 files. The total size must be 7 MB or less.
7 Select Next.
8 Select the Comment box, enter your comments, and then select 
Done.
9 Select Send.
• The camera will send the email.
• Even if a photo appears to have transferred successfully, errors with the 
recipient’s email account may cause the photo to be rejected or recognized as 
spam.
• You may not be able to send an email if no network connection is available or if 
your email account settings are incorrect.
• You cannot send an email if the file size exceeds the limit. The maximum 
photo resolution you can send is 2M and the longest video you can send is 
30 seconds at 
 resolution or a video recorded using . If the selected 
photo resolution is higher than 2M, it will be automatically resized to a lower 
resolution.
• If you cannot send an email because of firewall or user authentication settings, 
contact your network administrator or network service provider.
• When there are no files in the camera memory, you cannot use this feature.
• You can also send an email in Playback mode by pressing [m], and then 
selecting Share(Wi-Fi)  “  Email. 
						

							Wireless network  122
Accessing a website
1 On the Home screen, scroll to .
2 Select .
3 Select a website.
• If the pop-up message that prompts you to create an account appears, select 
OK.
• The camera will automatically attempt to connect to a WLAN via the most 
recently connected AP device. 
• If the camera has not previously been connected to a WLAN, it will search for 
available AP devices. (p.108)
4 Enter your ID and password to log in.
• For information about entering text, refer to "Entering text". (p.112)
• If you connected to SkyDrive, refer to "Using the login browser". (p.110)
• To select an ID from the list, select  “  an ID.
• If you have previously logged in to the website, you may be logged in 
automatically.
You must have an existing account on the file sharing website to use this feature.
Uploading photos or videos
1 Access the website with your camera.
2 Scroll to the files you want to upload, and then press [o].
• You can select up to 20 files. The total size must be 10 MB or less. (On some 
websites, the total size or number of files may vary.)
3 Select Upload.
• If you connected to Facebook, select Upload  “ Upload.
• On some websites, you can enter your comments by selecting the  Comment 
box. For information about entering text, refer to "Entering text". (p.112)
Using photo or video sharing websites
Upload your photos or videos to file sharing websites. Available websites will be displayed on your camera. To upload files to so me websites, you must visit the website and 
register before connecting your camera. 
						

							Using photo or video sharing websites
Wireless network  123
• You can set an upload folder for Facebook by pressing [m], and then 
selecting Upload Folder (Facebook) on the website's list screen.
• You cannot upload files if the file size exceeds the limit. The maximum photo 
resolution you can upload is 2M, and the longest video you can upload is  
30 seconds at 
 resolution or a video recorded using . If the selected 
photo resolution is higher than 2M, it will be automatically resized to a lower 
resolution. (On some websites, the maximum photo resolution may vary.)
• The method of uploading photos or videos may differ depending on the 
selected website.
• If you cannot access a website because of firewall or user authentication settings, 
contact your network administrator or network service provider.
• Uploaded photos or videos may be automatically titled with the date they were 
captured.
• The speed of your internet connection may affect how quickly photos upload or 
web pages open.
• When there are no files in the camera memory, you cannot use this feature.
• You can also upload photos or videos to file sharing websites in Playback mode 
by pressing [m], and then selecting Share(Wi-Fi)  “  a desired website.
• You cannot upload videos to some websites.
• When you upload photos to SkyDrive, they will be resized to 2M while 
maintaining their aspect ratios. 
						

							Wireless network  124
Uploading photos to online storage
1 On the Home screen, scroll to .
2 Select .
3 Select Web storage.
• To change the size for uploaded photos, press [m], and then select 
Upload Image Size.
• If you have registered more than one web storage, you can select from the list 
by pressing [
m], and then selecting Change Web storage .
• If the guide message appears, press [o].
• The camera will automatically attempt to connect to a WLAN via the most 
recently connected AP device.
• If the camera has not previously been connected to a WLAN, it will search for 
available AP devices. (p.108)
4 Enter your ID and password, and then select  Login “ OK.
• For information about entering text, refer to "Entering text". (p.112)
• To select an ID from the list, select  “  an ID.
• If you have previously logged in to the website, you may be logged in 
automatically.
To use this feature, you must create an AllShare Play account and an account 
with an affiliated online storage service using your PC. After finishing creating 
accounts, add your online storage account to AllShare Play. 
5 Scroll to the files you want to upload, and then press [o].
6 Select Upload.
• If you have registered more than one web storage, select a web storage first.
• You cannot upload video files to AllShare Play online storage.
• When there are no files in the camera memory, you cannot use this feature.
• You can upload up to 20 files. The total size must be 10 MB or less.
• You can also upload photos in Playback mode by pressing [m], and then 
selecting Share(Wi-Fi)  “  AllShare Play .
Using AllShare Play to send files
You can upload files from your camera to AllShare Play online storage or view files on an AllShare Play device connected to the s ame AP. 
						

							Using AllShare Play to send files
Wireless network  125
Viewing photos or videos on devices that support AllShare 
Play
1 On the Home screen, scroll to .
2 Select .
3 Select Nearby devices.
• If the guide message appears, press [o].
• The camera will automatically attempt to connect to a WLAN via the most 
recently connected AP device. 
• If the camera has not previously been connected to a WLAN, it will search for 
available AP devices. (p.108)
• You can set to allow only selected devices or all devices to connect by 
pressing [
m], and then selecting DLNA Access Control on the screen.
• A sharing file list is created. Wait until other devices can find your camera.
4 Connect the AllShare Play device to a network, and then turn on the 
AllShare Play feature.
• Refer to your device's user manual for more information.
5 On the camera, allow the AllShare Play device to connect to your 
camera.
6 On the AllShare Play device, select a camera to connect.
7 On the AllShare Play device, browse the shared photos or videos.
• For information about searching for the camera and browsing the photos or 
videos on the AllShare Play device, refer to the device's user manual.
• Videos may not play smoothly depending on the type of AllShare Play 
device or the network condition. If this happens, re-record the video in 
 
or smaller quality and play it again. If videos do not play smoothly on your 
device over the wireless connection, try connecting the camera to the device 
with an A/V cable.
AP
S A camera is connected to a TV that supports AllShare Play via WLAN. 
						

							Using AllShare Play to send files
Wireless network  126
• You can share up to 1,000 recent files.
• On an AllShare Play device, you can view only photos or videos captured with 
your camera.
• The range of the wireless connection between your camera and an AllShare Play 
device may vary depending on the specifications of the AP.
• If the camera is connected to 2 AllShare Play devices, playback may be slower.
• Photos or videos will be shared in their original sizes.
• You can use this feature only with devices that support AllShare Play.
• Shared photos or videos will not be stored on the AllShare Play device, but they 
can be stored in the camera to meet the device's specifications.
• Transferring photos or videos to the AllShare Play device may take some time 
depending on the network connection, the number of files to be shared, or the 
sizes of the files.
• If you power off the camera abnormally while viewing photos or videos on an 
AllShare Play device (for example, by removing the battery), the device considers 
the camera to still be connected.
• The order of photos or videos on the camera may be different than on the 
AllShare Play device.
• Depending on the number of photos or videos you want to share, it may take 
some time to load your photos or videos and complete the initial set-up process.
• While viewing photos or videos on the AllShare Play device, continuously using 
the device's remote or performing additional operations on the device may 
prevent this feature from working properly.
• If you reorder or sort files on the camera while viewing them on an AllShare Play 
device, you must repeat the initial set-up process to update the list of files on the 
device.
• When there are no files in the camera memory, you cannot use this feature.
• We recommend you use a network cable to connect your AllShare Play device 
to your AP. This will minimize any video ‘Stuttering’ you may experience when 
streaming content.
• To view files on an AllShare Play device using the Nearby devices feature, 
enable multicast mode on your AP. 
						

							Wireless network  127
Sending photos using Wi-Fi Direct
When the camera connects via a WLAN to a device that supports the Wi-Fi Direct function, you can send photos to the device. This feature may not be supported on some 
devices.
1 On the device, turn on the Wi-Fi Direct option.
2 On the camera, in Playback mode, scroll to a photo.
3 Press [m], and then select Share(Wi-Fi)  “  Wi-Fi Direct.
• When in the single image view, you can send only one photo at a time.
• When in the thumbnails view, you can select multiple photos by scrolling 
to thumbnails, and then pressing [
o]. Select Next  when you are finished 
selecting photos.
4 Select the device from the camera’s list of Wi-Fi Direct devices.
• Ensure that the device's Wi-Fi Direct option is turned on.
• You can also select your camera from the device's list of Wi-Fi Direct devices.
5 On the device, allow the camera to connect to the device.
• The photo will be sent to the device.
• You can send up to 20 files at a time.
• When there are no photos in the camera memory, you cannot use this feature.
• If you cannot connect to a Wi-Fi Direct device, update the device with the latest 
firmware. This feature may not be supported on some devices. 
						

							Settings menu   ………………………………………  129
Accessing the settings menu   ……………………  129
Sound  ………………………………………………\
  130
Display   ……………………………………………  130
Connectivity   ………………………………………  131
General   ……………………………………………  132
Settings
Refer to options to configure your camera’s settings. 
						

							Settings  129
4 Select an item.
BackSelectMedium
On
Sound 1 OffOn
Volume
Beep Sound
Shutter Sound
Start Sound
AF Sound
Sound
5 Select an option.
Back
Select
Off
Low
Medium
High
Volume
6 Press [m] to return to the previous screen.
Accessing the settings menu
1 On the Home screen, scroll to .
2 Select .
3 Select a menu.
Settings
Sound
Display
Connectivity
General
Icon Description
Sound: Set various camera sounds and the volume. (p.130)
Display: Customize the display settings. (p.130)
Connectivity: Set the connection options. (p.131)
General: Change the settings for the camera system such as 
memory format and default file name. (p.132)
Settings menu
Learn to configure your camera's settings.