Samsung A400b User Manual

* Click the Play( )/Stop( ) button in the table below to view the video file. 
Screen 
Adjustment Description  Play/Stop 
La ngua geYou can select the Language used for the menu screen. 
 
Menu  Position You can move Menu Position up/down/left/right. 
 
Menu 
TranslucencyYou can set the translucency of menu. 
 
1) Opaque
2)  High
3)  Medium
4)  Low
Menu  Display 
TimeYou can set the display time of the menu. 
 
1) 5 sec 5) 90 sec
2) 10 sec 6) 120 sec
3) 30 sec 7)  Stay  On 
4) 60 sec  
LE D Indi ca t...

 
 
 
 
Appears as an ellipse at the top at the back of your projector.
Blue sreen The Blue screen function causes the screen to change to the Blue screen if there is no 
signal input from the external device connected to your projector. 
 
 1) Off
 2) On
InformationYou can check external source signals, picture setup, PC picture adjustment and lamp 
use time.  
 
Downloaded From projector-manual.com Samsung Manuals 

 
 
 |  Before Contacting Service Personnel | 
 
 
   
 Installation and Connection 
 
Symptoms   Troubleshooting 
No Pow er.
zCheck the power cable connections.  
I want to install my projector on 
the ceiling. 
zThe ceiling installation support is sold separately. Contact yo ur local product 
distributor.  
External Source can not be 
selected.
zBe sure that the connection cable(s) (video) is properly connec ted to the 
proper port. If the device is not connected properly, it can no t be selected....

 
adjustment items, such as the Brightness and the Contrast have been changed 
correctly in the  command screen of the Projector menu.  
Only blue screen appears.
zBe sure to properly connect the external devices. Check the connection cables 
again. 
Screen appears in black and white or 
odd color./ screen is too dark or 
bright.
zAs mentioned above, check the adjustment items such as the Brightness, 
Contrast and Color in the menu.  
zIf you want to restore various settings to their factory defaults,...

 
 
 |  Care and Maintenance | Contact SAMSUNG WORLDWIDE | Other |Authority | 
 
 
 
  
   
To clean the exterior and lens of the projector 
 
Clean the projector  using a soft dry cloth.  
 
Do not clean the projector with flammable 
substances such as benzene, thinners or a wet 
cloth, as these may cause problems. 
 
Do not touch the projector with a nail or any 
other sharp objects, as this may scratch the 
surface.  
   
To clean the interior of the projector 
 
For cleaning the interior of the...

  
 
When handling the lamp, avoid touching any part of it except fo
r the handles. If you handle the lamp 
incorrectly, it may affect the screen quality and shorten its l ifetime.
The projector is will not operate normally if the cover is not  locked completely after lamp replacement. If your 
projector does not operate normally, refer to the  LED Indications.
  
   Contains Mercury, Dispose According to Local, State or Federal Laws   
 
Lamp Replacement Procedure
The lamp is very hot and operates 
with...

  
Latin  America 
ARGENTINE 0800-333-3733http://www.samsung.com/ar
BRAZIL0800-124-421 
4004-0000http://www.samsung.com/br
CHILE 800-SAMSUNG(726-7864)http://www.samsung.com/cl
COLOMBIA 01-8000112112http://www.samsung.com.co
COSTA RICA 0-800-507-7267http://www.samsung.com/latin
ECUADOR 1-800-10-7267http://www.samsung.com/latin
EL SALVADOR 800-6225http://www.samsung.com/latin
GUATEMALA 1-800-299-0013http://www.samsung.com/latin
JAMAICA 1-800-234-7267http://www.samsung.com/latin
PANAMA...

SWITZERLAND 0800-SAMSUNG(726-7864)http://www.samsung.com/ch
U.K 0870-SAMSUNG (726-7864)http://www.samsung.com/uk
 
 
CI S 
ESTONIA 800-7267http://www.samsung.ee
LATVIA 800-7267http://www.samsung.com/lv
LITHUANIA 8-800-77777http://www.samsung.lt
KAZAKHSTAN 8-10-800-500-55-500http://www.samsung.kz
KYRGYZSTAN 00-800-500-55-500
RUSSIA 8-800-555-55-55http://www.samsung.ru
UKRAINE 8-800-502-0000http://www.samsung.ua
UZBEKISTAN 8-800-120-0-400http://www.samsung.uz
 
 
Asia Pacific 
AUSTRALIA 1300 362 603...

 
 Glossary 
 
 Analog Broadcast
An existing broadcasting signal transmitted by a broadcasting station in accordance with the NTSC standard. 
 
 
AN TENN A  IN Port 
This is the port for connecting a TV antenna using a coaxial cable. It is generally used to watch public broadcast 
programs. 
 
 
AV Receiver 
An AV Receiver provides a number of input and output interfaces for audio and video so as to enable the user to 
connect and use various input and output devices. 
 
 
Backlight Remote Control
The...

   Digital Copy Protection) coding feature installed.  
 
 
Overscan
Overscan cuts the edge of the picture when there is unnecessary information, images or noise at the edge of the 
picture. For extremely poor video signals, some unnecessary video signals may be displayed on the screen.  
 
 
RS-232C Port (Service Input Port)
This port is provided for service purposes. This port provides data communication in accordance with the RS-232C 
communication standard.  
 
 
S-Video IN Port 
This is called super...