Samsung A400b User Manual

 
Downloaded From projector-manual.com Samsung Manuals 

 
To avoid injuries or damage to property, please read the following precautions carefully and use the product 
accordingly. 
Failure to follow the instructions marked with this symbol may  cause personal injury or even fatality.  
Failure to follow the instructions marked with this symbol may cause personal injury or damage to the 
product or property.    
 
 
|  Power Rela ted  | Installation Related  | Cleaning and Use Related  | 
    
 
  
  [The images here are for reference only, and are not...

To disconnect the apparatus from the mains, the plug must be pulled out from the 
mains socket, therefore the mains plug shall be readily operable. 
zThere is a danger of electric shock or fire.  
 
  
Always unplug the unit by holding the power plug. Pulling the power cable may 
damage the inside of it. 
zThere is a danger of fire.  
  
Unplug the power plug before cleaning the product. 
zThere is a danger of electric shock or fire.  
  
 
 
 
| Power Rela ted| Installation Related| Cleaning and Use...

  
Do not install on an unstable location, or on a stand smaller than the pr oduct. 
zIf the product falls it may harm children. Install on a flat and stable location 
as the front part is heavy.  
  
In case of thunder/lightning, disconnect the power cord from the wall outlet. 
zThere is a danger of electric shock or fire.   
 
  
Make sure the product's vents are not blocked by a table cloth or curtain. 
zAn increase in the internal temperature may cause a fire.  
  
Place the product on the ground...

zThis may cause electric shock or fire.  
If water or an alien substance enters the product, turn the product off, 
disconnect the power cord from a wall outlet and contact a Service Center.  
  
Do not disassemble, or attempt to fix or modify the product. 
zWhen the product requires repairs, contact a Service Center.  
  
Do not use or keep the product near flammable sprays or other such substances. 
zThere is a danger of fire or explosion.  
  
Do not place containers with water, vases, drinks,...

When cleaning the product, disconnect the power cord and wipe the product using 
a soft dry cloth. 
zDo not use any chemicals such as wax, benzene, alcohol, thinners, 
insecticide, air freshener, lubricant or detergent.  
  
When not using the product for an extended period of time, disconnect  the power 
pl ug. 
zOtherwise, this may cause heat emission from the accumulated dirt or 
degraded insulation, leading to electric shock or fire.  
 Do not install the product in places with heavy dust, chemical...

(Applicable in the European Union and other European countries with separate collection 
systems) 
 
This marking shown on the product or its literature, indicates that it should not be 
disposed with other household waste at the end of its working life. To prevent possible 
harm to the environment or damage to health from uncontrolled waste disposal, please 
separate this from other types of waste and recycle it responsibly to promote the 
sustainable reuse of material resources. 
 
Household users...

 
 
 |  Produ ct Features  | Produ ct Vi ews  | Remote Control  | Product Specifications  | 
 
 
 
 
 
 
 
 
 Optical engine with advanced DLP technology  
 
  - 1280x768 panel has been adapted.  
- 5 segment color wheel to implement optimal colors.  
- 200W Lamp designed to improve luminance
  
 
 Vivid colors  
 
  - Quality picture tuning focused on improving color - this unit
 aims at realizing color coordinates that 
meet broadcasting standards on video production.   
 
 Minimized fan noise and...

 
 
 
 
 
 
  
  
1. Indicators 
- STAND BY (Blue LED) 
- LAMP (Blue LED) 
- TEMP (Red LED) 
※ Refer to the LED Indications. 
  
2. Focus Ring 
Used for Focus Adjustment. 
  
3. Remote Control Signal Receiver 
  
4. Lens 
  
5. Adjustable Feet 
You can adjust the screen position by moving the 
adjustable feet up and down.   
  
6. Zoom Knob  
Used to enlarge or reduce image size.  
  
7.
POWER( ) Button  
Used to turn the projector on or off.  
  
8. SOURCE Button  
Used to select input signals from the...

 Power Cable  Remote Control/ 2 Batteries  Cleaning Cloth 
   
   
 
 
 
 
 LED Indications  
 
●:Light is On    ◐:Light is Blinking    ○:Light is Off
STAND 
BY  LAMP  TEMP  Information 
●○ ○If you press the POWER button on the remote control or projector, the screen 
appear s  within  30  secon ds.
● ● ○ The projector is in normal operating condition. 
●◐ ○This state appears when the projector is preparing an operation after the POWER button 
on the projector or the remote control has been pressed.
○◐...