Samsung 943snx User Manual

							Cables
 
D-Sub Cable Power Cord  
Others  
 
Cleaning Cloth     Note
Cleaning Cloth is only provided for highly polished black products as a \
product feature.
Your Monitor
Initial Settings Select the language using the up or down key.
The displayed content will disappear after 40 seconds.
Turn the Power button off and on. It will be displayed again.
It can be displayed up to three (3) times. Make sure to adjust the res\
olution of your PC before
reaching the maximum count.
 Note
The resolution displayed on the screen is the optimal resolution for thi\
s product.
Adjust your PC resolution so that it is the same as the optimal resoluti\
on for this product. Introduction 
						

							Front
MENU button [MENU/ ]
Opens the on-screen menu and exits from the menu. Also use to exit the
OSD menu or return to the previous menu. Customized Key[ ]
You can customize key assignment for the Custom button according to
your preferences.  Note
You can configure the customized key for a required function via  Setup >
Customized Key. Brightness button [ ]
When OSD is not on the screen, push the button to adjust brightness.
>> Click here to see an animation clip Adjust buttons [ ]
These buttons allow you to adjust items in the menu. Enter button [ ]
Activates a highlighted menu item. AUTO button
Use this button for auto adjustment.
>> Click here to see an animation clipIntroduction 
						

							Power button [ ]
Use this button for turning the product on and off. Power Indicator
This light is lit when operating normally, and blinks once when your  
adjustments are saved.
 Note
See PowerSaver  described in the manual for further information regarding
power saving functions. For energy conservation, turn your monitor OFF
when it is not needed or when leaving it unattended for long periods.
Rear  Note
The configuration at the back of the product may vary from product to product. Simple Stand
HAS StandPOWER port
Connect the power cord for your monitor to the POWER port on the back of\
the product.
RGB IN port
Connect the D-sub cable to the 15-pin, RGB IN port on the back of your m\
on-
itor.
Kensington Lock
The Kensington lock is a device used to physically fix the system when u\
sing
it in a public place. (The locking device has to be purchased separatel\
y.) For
using a locking device, contact where you purchase it.
 Note
The location of the Kensington Lock may be different depending on its mo\
del.
Using the Anti-Theft Kensington Lock
1. Insert the locking device into the Kensington slot on the Monitor  and
turn it in the locking direction     .  Introduction 
						

							2. Connect the Kensington Lock cable.
3. Fix the Kensington Lock to a desk or a heavy stationary object.
 Note
See Connecting Cables for further information regarding cable connec-
tions. Cable holding ring
• Fix the cables using the holding ring, as shown in the figure.
{2043SN/2043SNX/2243SN/2243SNX} Package Contents  Note
Please make sure the following items are included with your monitor.
If any items are missing, contact your dealer.
Contact a local dealer to buy optional items.
Unpacking Type 1 Monitor & Simple stand
  Note
MagicRotation program can not be provided as Simple Stand does not suppo\
rt Pivot function.
Type 2 Introduction 
						

							Monitor & HAS stand
 
Type 3 Monitor & Dual Hinge Stand
 
Manuals Quick Setup Guide Warranty Card
(Not available in all loca-tions) Users Guide
Cables  
D-Sub Cable Power Cord  
Others  
 
Cleaning Cloth     Note
Cleaning Cloth is only provided for highly polished black products as a \
product feature. Introduction 
						

							Your Monitor
Initial Settings
Select the language using the up or down key.
The displayed content will disappear after 40 seconds.
Turn the Power button off and on. It will be displayed again.
It can be displayed up to three (3) times. Make sure to adjust the res\
olution of your PC before
reaching the maximum count.
 Note
The resolution displayed on the screen is the optimal resolution for thi\
s product.
Adjust your PC resolution so that it is the same as the optimal resoluti\
on for this product.
Front MENU button [MENU/ ]
Opens the on-screen menu and exits from the menu. Also use to exit the
OSD menu or return to the previous menu. Customized Key[ ]Introduction 
						

							You can customize key assignment for the Custom button according to
your preferences.
 Note
You can configure the customized key for a required function via  Setup >
Customized Key. Brightness button [ ]
When OSD is not on the screen, push the button to adjust brightness.
>> Click here to see an animation clip Adjust buttons [ ]
These buttons allow you to adjust items in the menu. Enter button [ ]
Activates a highlighted menu item. AUTO button
Use this button for auto adjustment.
>> Click here to see an animation clip
Power button [ ]
Use this button for turning the product on and off.  Note
See PowerSaver  described in the manual for further information regarding
power saving functions. For energy conservation, turn your monitor OFF
when it is not needed or when leaving it unattended for long periods.
Rear  Note
The configuration at the back of the product may vary from product to product. Simple Stand
HAS Stand
Introduction
Power Indicator
This light is lit when operating normally, and blinks once when your  
adjustments are saved. 
						

							POWER port
Connect the power cord for your monitor to the POWER port on the back of\
the product.
RGB IN port
Connect the D-sub cable to the 15-pin, RGB IN port on the back of your m\
on-
itor.
Kensington Lock
The Kensington lock is a device used to physically fix the system when u\
sing
it in a public place. (The locking device has to be purchased separatel\
y.) For
using a locking device, contact where you purchase it.
 Note
The location of the Kensington Lock may be different depending on its mo\
del.
Using the Anti-Theft Kensington Lock
1. Insert the locking device into the Kensington slot on the Monitor  and
turn it in the locking direction  .
2. Connect the Kensington Lock cable.
3. Fix the Kensington Lock to a desk or a heavy stationary object.  Note
See Connecting Cables for further information regarding cable connec-
tions. Cable holding ring
• Fix the cables using the holding ring, as shown in the figure. Introduction 
						

							Connections
{943SN/943SNX} Connecting Cables
 Connect the power cord for your monitor to the power port on the back o\
f the monitor.
Plug the power cord for the monitor into a nearby outlet.  Use a connection appropriate for your computer.
 Using the D-sub (Analog) connector on the video card.
• Connect the signal cable to the 15-pin, D-sub port on the back of your m\
onitor. [RGB IN]
 Connected to a Macintosh.
• Connect the monitor to the Macintosh computer using the D-sub connection\
 cable.  Note
If the monitor and the computer are connected, you can turn them on and \
use them. 
						

							Using the Stand
Monitor Assembly
Simple Stand
HAS Stand
Monitor and Bottom
Attaching a Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface p\
ad. Simple Stand
HAS Stand
A. Monitor
B. Mounting interface pad (Sold separately)
1. Turn off your monitor and unplug its power cord.
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath i\
t to protect the
screen.
3. Remove two screws and then remove the stand from the LCD monitor. 4. Align the mounting interface pad with the holes in the rear cover mounti\
ng pad and secure
it with four screws that came with the arm-type base, wall mount hanger \
or other base. •
Do not use screws longer than the standard dimension, as they may dam-
age the inside of the Monitor.
• For wall mounts that do not comply with VESA standard screw specifica-
tions, the length of the screws may differ depending on their specificat\
ions.
• Do not use screws that do not comply with the VESA standard screw
specifications. Connections