Samsung 943snx User Manual

The monitors will turn off automatically at the specified time.
• Off •On
MENU →   ,   →   →   ,   →  →   ,   →   →  ,   → MENU
Image Size You can change the size of the screen displayed on your monitor.
• Auto •Wide
• Auto - The screen is displayed in accordance with the screen aspect ratio of\
 the input
signals.
• Wide - A full screen is displayed regardless of the screen aspect ratio of t\
he input signals.  Note
• Signals not available in the standard mode table are not supported.
• If the wide...

 Information
Shows a video source, display mode on the OSD screen.
MENU → 
 ,   →MENU
{2243SN/2243SNX} Direct Functions
AUTO When the AUTO button is pressed, the auto adjustment screen appears as\
 shown in the
animated screen on the center. Adjusting the Monitor 

Auto adjustment allows the monitor to self-adjust to the incoming Analog\
 signal. The values
of Fine, Coarse and Position are adjusted automatically.
If auto adjustment does not work properly, press AUTO button again to \
adjust picture
with more accuracy. If you change resolution in the control panel, auto function will be exe\
cuted automatically.
OSD Lock & Unlock When pressing the AUTO button after locking the OSD When pressing the MENU button after locking the OSD Adjusting the Monitor 

This is the function that locks the OSD in order to keep the current sta\
tes of settings or prevent
others from adjusting the current settings.
Lock : Hold down the MENU button for more than five (5) seconds to act\
ivate the OSD ad-
justment lock function.
Unlock : Hold down the MENU button for more than five (5) seconds to d\
eactivate the OSD
adjustment lock function.
 Note
Though the OSD adjustment lock function is activated, you can still adju\
st the brightness and
contrast, and adjust Customized...

Customized key
You can customize key assignment for the Custom button according to your\
 preferences.
To view the operating screen displayed when pressing the [ 
 ] button after configuring the
customized key for a function, click the name of each function.
(Image Size - MagicBright - MagicColor - Color Effect)  Note
You can configure the customized key for a required function via  Setup > Customized
Key. Adjusting the Monitor 

Brightness
When OSD is not on the screen, push the Brightness ( ) button to adjust brightness.
OSD Function Picture
BrightnessContrastMagic-
Bright Color
MagicColorColor ToneColor Con-
trolColor Effect
Gamma Image
CoarseFineSharpnessH-PositionV-Position OSD
LanguageH-PositionV-PositionTranspar-
encyDisplay
Time Setup
ResetCustom-
ized KeyOff Timer
Image Size  Information
 Picture
Brightness (Not available in  MagicBright  mode of Dynamic Contrast.)Adjusting the Monitor 

You can use the on-screen menus to change the brightness according to pe\
rsonal prefer-
ence.
MENU → 
 →   →   ,   → MENU
Contrast (Not available in  MagicBright mode of Dynamic Contrast.) You can use the on-screen menus to change the contrast according to pers\
onal preference.
( Not available in 
MagicColor mode of Full and Intelligent. )Adjusting the Monitor 

MENU →   →   ,   →   →   ,   → MENU
MagicBright Push the   button to circle through available preconfigured modes.
MagicBright is a new feature providing optimum viewing environment depending on the\
contents of the image you are watching. Currently seven different modes \
are available:  Cus-
tom,  Text,  Internet,  Game, Sport, Movie and  Dynamic Contrast . Each mode has its own
pre-configured brightness value. You can easily select one of seven sett\
ings by simply press-
ing Customized Key control...

 →   ,   →   →   ,   → MENU
 Color
(Not available in  MagicBright mode of Dynamic Contrast.)
MagicColor MagicColor is a new technology that Samsung has exclusively developed to improve d\
igital
image and to display natural color more clearly without disturbing image\
 quality.
•
Off - Returns to the original mode.
• Demo - The screen before applying  MagicColor appears on the right and the screen after
applying  MagicColor appears on the left.
• Full - Displays not only vivid natural color but also more...

Color Tone
The tone of the color can be changed and one of four modes can be select\
ed.
•
Cool - Makes whites bluish.
• Normal - Keeps whites white.
• Warm - Makes whites reddish.
• Custom - Select this mode when you want to adjust the image according to your \
prefer-
ences.
( Not available in  MagicColor mode of Full and Intelligent. )
MENU →   ,   →   →   ,   →   →   ,   → MENU
Adjusting the Monitor