Samsung 943snx User Manual

Q:
Have the screen colors become strange after running a program or due to \
a crash
between applications?
A: Reboot the computer.
Q: Has the video card been set properly?
A: Set the video card by referring to the video card manual.
The screen suddenly has become unbalanced.
Q: Have you changed the video card or the driver?
A: Adjust screen image position and size using the OSD.
Q: Have you adjusted the resolution or frequency to the monitor?
A:
Adjust the resolution and frequency at the video...

There is a message that reads Unrecognized monitor, Plug & Play (VE-
SA DDC) monitor found.
Q: Have you installed the monitor driver?
A: Install the monitor driver according to the Driver Installation Instructions.
Q:
See the video card manual to see if the Plug & Play (VESA DDC) functio\
n can be
supported.
A: Install the monitor driver according to the  Driver Installation Instructions
.
Check when MagicTune™ does not function properly.
Q: MagicTune™ feature is found only on PC (VGA) with Window OS...

(Do not exceed 75 Hz when using the maximum resolution.)
If you have problems in installing the adapter (video) driver, boot th\
e computer in Safe Mode,
remove the Display Adapter in the Control Panel 
→ System  → Device Administrator and
then reboot the computer to reinstall the adapter (video) driver.  Note
If problems repeatedly occur, contact an authorized service center.
Q & A Q: How can I change the frequency?
A: The frequency can be changed by reconfiguring the video card.
A:Note that video card...

 Note
Before calling for assistance, check the information in this section to \
see if you can remedy
any problems yourself. If you do need assistance, please call the phone number on the In-
formation section or contact your dealer.
{2243SN/2243SNX} Self-Test Feature Check  Note
Your monitor provides a self test feature that allows you to check wheth\
er your monitor is
functioning properly.
Self-Test Feature Check 1. Turn off both your computer and the monitor.
2. Unplug the video cable from the back...

Remove all electronic devices such as radios, fans, clocks and telephone\
s that are within 3
feet (one meter) of the monitor.
Useful Tips A monitor recreates visual signals received from the computer. Therefore\
, if there is a problem
with the computer or the video card, this can cause the monitor to becom\
e blank, have poor
coloring, become noisy, and video mode not supported, etc. In this case,\
 first check the source
of the problem, and then contact the Service Center or your dealer.
Judging the...

A:
If the display exceeds SXGA or 75 Hz, a Not Optimum Mode, Recommended
Mode 1920 x 1080 60 Hz message is displayed. If the display exceeds 85 Hz, \
the
display will work properly but the  Not Optimum Mode, Recommended Mode 1920
x 1080 60 Hz message appears for one minute and then disappears.
Please change to the recommended mode during this one-minute period.
(The message is displayed again if the system is rebooted.)
Q: There is no image on the screen. Is the power indicator on the monitor b\
linking...

A: Adjust the resolution and frequency of the video card.
(Refer to the Preset Timing Modes).
LED is blinking but no images on the screen.
Q: Is the frequency properly adjusted when checking the Display Timing on t\
he menu?
A: Adjust the frequency properly by referring to the video card manual and \
the Preset
Timing Modes.
(The maximum frequency per resolution may differ from product to produc\
t.)
There are only 16 colors shown on the screen. The screen colors have
changed after changing the video...

MagicTune™ doesnt work properly.
Q: Have you changed your PC or video graphic card?
A:
Download the latest program. The program can be downloaded  http://www.sam-
sung.com/monitor/magictune
Q: Did you install the program?
A: Reboot the computer after installing the program for the first time. If \
a copy of the pro- gram is already installed, remove it, reboot the computer, and then inst\
all the program
again. You need to reboot the computer for it to operate normally after \
installing or
removing the...

* Contact the video card manufacturer for details.
Q: How can I set the Power Saving function?
A: Windows XP: Set the resolution in the Control Panel  → Appearance and Themes  → Display  → Screen
Saver.
Set the function in the BIOS-SETUP of the computer. (Refer to the Windo\
ws / Computer
Manual).
A: Windows ME/2000: Set the resolution at the Control Panel  → Display → Screen Saver.
Set the function in the BIOS-SETUP of the computer. (Refer to the Windo\
ws / Computer
Manual).
Q:
How can I clean the...

4.
Turn off your monitor and reconnect the video cable; then turn on both y\
our computer
and the monitor.
If your monitor screen remains blank after using the previous procedure,\
 check your video
controller and computer system;  your monitor is functioning properly.
Warning Messages If there is something wrong with the input signal, a message appears on \
the screen or the
screen goes blank although the power indicator LED is still on. The mess\
age may indicate
that the monitor is out of scan range...