Samsung 750 Lcd Tv User Manual

English - 29

Time Zone
Select your time zone.
This function is only available when Clock Mode is set to Auto.
DST	(Daylight	Saving	Time)	→	Off / On / Auto
Switches the Daylight Saving Time function on or off.
This function is only available when Clock Mode is set to Auto.
Sleep Timer
The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes).
Press the TOOLS button to display the Tools menu. You can also set the sleep timer by selecting Tools	→	Sleep...

English - 0

Network Connection
You can set up the Internet Protocol so that you can communicate with var\
ious connected networks.
Network Connection - Cable
LAN Connection for a DHCP Environment
The procedures to set up the network using Dynamic Host Configuration Pr\
otocol (DHCP) are described below. Since an IP address, subnet mask, gateway, and DNS are automatically allocated when DHCP is selected, you do not have to enter them manually.1. 
Connect the LAN port on the rear panel of the TV and...

English - 1

LAN Connection for Static IP Environment
The procedures to set up the network using a static IP address are described below. You have to manually enter the IP address, subnet mask, gateway, and DNS that are provided by your Internet Service Provider (ISP). 1. 
Connect the LAN port on the rear panel of the TV and the LAN port on the wall using the LAN cable.
You can connect the LAN via a Sharer (Router).
The terminals (the position of the port and the type) of the external \
device may...

English - 2

Network Connection - Wireless
You can connect to the network wirelessly through a wireless IP sharer.
1. Connect the ‘Samsung Wireless LAN Adapter’ into the USB1(HDD) or USB2 terminal of the TV.
You must use the ‘Samsung Wireless LAN Adapter’(WIS09ABGN) to use a wireless network.
Samsung’s Wireless LAN adapter is sold separately. The WIS09ABGN Wireless LAN adapter is offered by select retailers, Ecommerce sites and Samsungparts.com.
To use a wireless network, your TV must be connected...

English - 

Setting the Network
Network Type
Select Cable or Wireless as the method to connect to the network.
The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected. 
Cable
Connect to the network using a cable.
Wireless
Connect to the network wirelessly.
Network Setup 
Cable Network Setup (when Network Type is set to Cable)
Please check if the LAN cable is connected.
Internet	Protocol	Setup	→	Auto	Setup	/	Manual	Setup
Network Test: You can test or confirm the network...

English - 4

When unable to connect to an AP
Your TV may fail to locate an AP that is configured as a private SSID type. In this case, please change \
the AP settings and try again. If your Internet service provider has registered the MAC address \
of the device used to connect to the Internet for the first time and authenticates the MAC address each time you connect to th\
e Internet, your TV may not be able to connect to the Internet as the MAC address differs from that of the device (PC).
In...

English - 

Ad-hoc: You can connect to a mobile device without an access point through the ‘\
Samsung Wireless LAN Adapter’ by using a peer to peer network.
How to connect to new Ad-hoc
1. Choose Select a network, then a device list is displayed.
2. 
While in the device list, press the Blue button on the remote or select \
Ad-hoc.
The message The existing network system may have limited functionality. Do you want to change the network connection? is displayed.
. 
Input the generated...

English - 6

INPUT / SUPPORT
Input Menu
Source List
Use to select TV or other external input sources such as DVD / Blu-ray players / Cable Box /
Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice.
Press the SOURCE button on the remote control to view an external signal source.
TV / AV1 / AV2 / Component1 / Component2 / PC / HDMI1/DVI / HDMI2 / HDMI / HDMI4 / USB
You can choose only those external devices that are connected to the TV. In the...

English - 7

Using the Remote Control Buttons in the Product Guide Menu
ButtonOperations
Yellow ButtonShows the contents of the Product Guide sequentially. (Auto Play)
◄/►Move the cursor and select an item.
ENTERESelect the currently selected item.
RETURNReturn to the previous menu.
EXITStop the current function and return to the Product Guide main menu.
Self Diagnosis
Picture Test
If you think you have a picture problem, perform the picture test. Check\
 the color pattern on the screen to see if...

English - 8
Software Upgrade
Samsung may offer upgrades for the TV’s firmware in the future. These upgrades can be performed via the TV when it is connected to the Internet, or by downloading the new firmware from samsung.com to a USB memory device.
Current Version is the software already installed in the TV.
Alternative Software (Backup) shows the previous version that will be replaced.
Software is represented as ‘Year/Month/Day_Version’. The more recent the date, the newer the software version....