Runco Vx3000i Ultra Operation Manual

VX-3000 Installation/Operation Manual 77 
PREL
IMINARY
6.1 
RS-232 Connection 
and Port Configuration
To interface the VX-3000 with a home theater automation/control system or a PC running 
terminal emulation software:
1. Connect it to your control system or PC as shown in Figure 3-17.
2. Start a terminal session on your PC using a terminal-emulation program, such as 
HyperTerminal. 
3. Configure the RS-232 controller or PC serial port as follows: no parity, 8 data bits, 1 
stop bit and no flow control....

Serial Communications
78 VX-3000 Installation/Operation Manual
PREL
IMINARY
X003XMenu
X004XEnter
X005XExit
X006XUp
X007XDown
X008XLeft
X009XRight
X011XInfo
X021XRemote 1
X022XRemote 2
X023XRemote 3
X024XRemote 4
X025XRemote 5
X026XRemote 6
X027XRemote 7
X028XRemote 8
X029XRemote 9
X030XRemote 0
X041XPicture Memory "Custom 1"
X042XPicture Memory "Custom 2"
X043XPicture Memory "ISF Day"
X044XPicture Memory "ISF Night"
X047XPicture Adjust Reset to default
X048XSetup Reset to...

Serial Communications
VX-3000 Installation/Operation Manual 79 
PREL
IMINARY
X055Xopen pip window
X056XPIP increase sub window size
X057XPIP decrease sub windwo size
X058XSet PIP active window
X059XSet PIP on 
X060XSet PIP off
X061XAspect Ration:16:9
X062XAspect Ration:4:3
X063XAspect Ration:LetterBox
X064XAspect Ration:VirtualWide
X065XAspect Ration:Cinema
X066XAspect Ration:VirtualCinema
X067XFor service tool copy ct RGB value
X071Xbaud rate = 9600
X072Xbaud rate = 19200
X073Xbaud rate =...

Serial Communications
80 VX-3000 Installation/Operation Manual
PREL
IMINARY
X106Xcopy comp 720P ADC value to other timing
X107Xcopy comp 721P ADC value to other timing( 7.5 IRE)
X108Xcopy RGBHD ADC value to other timing
X109Xcopy 5160 video ntsc value to pal
X110Xcopy 5160 svideo ntsc value to pal
X112XColor Temp: 5400
X113XColor Temp: 6500
X114XColor Temp: 9300
X115XColor Temp: Custom1
X116XColor Temp: Custom2
X121XSwitch OSD language 1 English
X122XSwitch OSD language 2 French
X123XSwitch OSD language...

Serial Communications
VX-3000 Installation/Operation Manual 81 
PREL
IMINARY
X182XBurn-In on/off eco
X183XBurn-In on/off normal
X221X32-Gray bars
X226XChecker board
X231XDMDRedCurtain
X232XDMDGreenCurtain
X233XDMDBlueCurtain
X234XDMDFullBlackCurtain
X235XDMDYellowSolidField
X236XDMDCyanSolidField
X237XDMDMagentaSolidField
X252XDMDFullWhiteCurtain
X253Xset IRIS full off
X254Xset IRIS full on
X255Xset dynamic black off
X256Xset dynamic black on
X260Xtest pattern off
X300Xfocus enable
X301Xfocus disable...

Serial Communications
82 VX-3000 Installation/Operation Manual
PREL
IMINARY
X521XFocus decrement (-1)
X522XZoom increment   (+1)
X523XZoom decrement  (-1)
X524XRVR increment     (+1) 
X525XRVR decrement    (-1)
X526XH Lens Shift increment (+1)
X527XH Lens Shift decrement (-1)
X528XV Lens Shift increment (+1)
X529XV Lens Shift decrement (-1)
X530XH keystone increment (+1)
X531XH keystone decrement (-1)
X532XV keystone increment (+1)
X533XV keystone decrement (-1)
X550XDisable Splash screen
X551XEnable...

Serial Communications
VX-3000 Installation/Operation Manual 83 
PREL
IMINARY
Table 6-2. Serial Commands: Z Command 
CodeFunction
Z001Lamp hours -- Normal (User OSD)
Z002Lamp hours -- ECO (User OSD)
Z004Lamp hours -- Normal (Factory OSD)
Z005Lamp hours -- ECO (Factory OSD)
Z010picture mode setting
Z011User brightness
Z012User contrast
Z014User color
Z015User tint
Z016User sharpness
Z017Color temperature
Z034Burn-In On timer
Z035Burn-In Off timer
Z038Burn-In Cycle
Z090select IRE
Z091NR_TR
Z092Detail...

Serial Communications
84 VX-3000 Installation/Operation Manual
PREL
IMINARY
Z134R gain to RGBHD(AD9984)
Z135G gain to RGBHD(AD9984)
Z136B gain to RGBHD(AD9984)
Z137Y offset to Comp(AD9984)
Z138Pb offset to Comp(AD9984)
Z139Pr offset to Comp(AD9984)
Z140Y offset to Comp(AD9984)
Z141Pb offset to Comp(AD9984)
Z142Pr offset to Comp(AD9984)
Z143HDMI1 color space
Z144HDMI2 color space
Z145Splash timer
Z146Cine Wide mode
Z147Splash Screen ISF or normal
Z148Focus Zoom OSD visible
Z150select RS232 baudrate...

Serial Communications
VX-3000 Installation/Operation Manual 85 
PREL
IMINARY
Z175comp2 1080p ADC B offset
Z176comp2 1080p ADC R gain
Z177comp2 1080p ADC G gain
Z178comp2 1080p ADC B gain
Z180Red range 
Z181Green range
Z182Blue range
Z183Yellow range
Z184Cyan range
Z185Magenta range
Z186Red saturation
Z187Green saturation
Z188Blue saturation
Z189Yellow saturation
Z190Cyan saturation
Z191Magenta saturation
Z200Gamut menu
Table 6-3. Serial Commands: U Command 
CodeFunction
U1Set ISF Name (1th~10th word)...

Serial Communications
86 VX-3000 Installation/Operation Manual
PREL
IMINARY
Downloaded From projector-manual.com Runco Manuals