Home > Runco > Projector > Runco Vx 44d Projector User Manual

Runco Vx 44d Projector User Manual

Here you can view all the pages of manual Runco Vx 44d Projector User Manual. The Runco manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 101

Runco VX-44d/-55d Owner’s Operating Manual 89 
PREL
IMINARY
6.1 
RS-232 Connection 
and Port Configuration
To interface the DHD Controller with a home theater automation/control system or a PC 
running terminal emulation software, connect it to your control system or PC as shown in 
Figure 3-13. 
Configure the RS-232 controller or PC serial port as follows: no parity, 8 data bits, 1 stop 
bit and no flow control. Set the baud rate to 19200, to match that of the DHD Controller 
RS-232 port. 
6.2 
Serial...

Page 102

Serial Communications
90 Runco VX-44d/-55d Owner’s Operating Manual
PRELI
MINARY
Input Selection Commands
COMPONENTNAYESSelects the Component input
COMPOSITENAYESSelects the Composite video input 
HDMI1NAYESSelects the HDMI1 input 
HDMI2NAYESSelects the HDMI2 input 
HD1NA YESSelects the RGB HD 1 input
HD2NA YESSelects the RGB HD 2 input
INPUT?NANAReturns active input
SVIDEO1NAYESSelects the S-Video 1 input
SVIDEO2NAYESSelects the S-Video 2 input
Aspect Ratio Commands
ANAMORPHICNAYESSelects the Anamorphic...

Page 103

Serial Communications
Runco VX-44d/-55d Owner’s Operating Manual 91 
PREL
IMINARY
Picture Adjust Commands
BRIGHTNESS-100/100YESSets a value for brightness
BRIGHTNESS?NANAReturns brightness setting value
CHROMADELAY-12/12YESSets a value for input color chroma delay
CHROMADELAY?NANAReturns input color chroma delay setting
COLOR-100/100YESSets a value for color
COLOR?NANAReturns color setting value
CONTRAST-100/100YESSets a value for contrast
CONTRAST?NANAReturns contrast setting value
FILMMODE0/1YESSets...

Page 104

Serial Communications
92 Runco VX-44d/-55d Owner’s Operating Manual
PRELI
MINARY
Input Position Commands
IHEIGHT-100/100YESSets the value for input height
IHEIGHT?NANAReturns input height value
IHPOS-100/100YESSets a value for horizontal input position
IHPOS?NANAReturns input horizontal position value
IVPOS-100/100YESSets a value for vertical input position
IVPOS?NANAReturns input vertical position value
IWIDTH-100/100YESSets the value for input width 
IWIDTH?NANAReturns input horizontal width value...

Page 105

Serial Communications
Runco VX-44d/-55d Owner’s Operating Manual 93 
PREL
IMINARY
Miscellaneous Commands
BKGND-100/100YESSets the background color for letterbox or 
4:3 aspect ratio (-100 = black; 100 = white)
BKGND?NANAReturns background setting value
DATE?NANAReturns product manufacture date
DISPLAY?NANAReturns display device input source value
HDINPUTRESNAYESSets YPbPr input resolution and refresh 
rate for HD1/HD2, as follows:
0 = 480i
1 = 480p
2 = 576i
3 = 576p
4 = 720p / 60 Hz
5 = 1080i / 60 Hz
6 =...

Page 106

Serial Communications
94 Runco VX-44d/-55d Owner’s Operating Manual
PRELI
MINARY
The following serial commands are meant to emulate buttons on the remote control or DHD Con-
troller front panel. Each button has its own serial command, so effectively it is as if you were using 
the IR remote only you’ll be doing so via serial commands. These commands provide active OSD 
responses just like the IR remote. 
DOWNNANADown-Arrow () key
ENTERNANAENTER key
LEFTNANALeft-Arrow () key
MENUNANAMENU...

Page 107

Runco VX-44d/-55d Owner’s Operating Manual 95 
PREL
IMINARY
7.1 
VX-44d/-55d 
Specifications
Table 7-1 lists the VX-44d/-55d specifications.  
7. Specifications
Table 7-1. VX-44d/-55d Specifications 
Projector Type:Digital Light Processing (DLP), 3-chip, 16:9 SuperOnyx DMD
Native Resolution:1920 x 1080 (16:9)
Aspect Ratios:Refer to Table 7-2 
Video Standards:Refer to Table 7-2 
DTV Compatibility:480p, 720p, 1080i, 1080p
Scan Frequency:Horizontal: 15 kHz to 120 kHz 
Vertical: 23.97 Hz to 150 Hz
Picture...

Page 108

Specifications
96 Runco VX-44d/-55d Owner’s Operating Manual
PREL
IMINARY
Brightness and Contrast: Cinema Standards Measurement System (CSMS) 
Specifications
- Brightness: 86.0 foot-Lamberts (fL) (VX-44d); 
107.3 fL (VX-55d) 
- Contrast Ratio (variable, based on lens aperture setting):  
233:1 - 285:1 (VX-44d); 
229:1 - 279:1 (VX-55d) 
These measurements are taken from the projector in a controlled, 
home theater environment. All measurements are made to 
ANSI/NAPM IT7.228-1997 specifications using the...

Page 109

Specifications
Runco VX-44d/-55d Owner’s Operating Manual 97 
PREL
IMINARY
Limited Warranty: Projector: Two (2) years parts and labor from the date of 
delivery to the end user.
Lamp: 1000 hours or six (6) months, whichever comes first. 
Specifications are subject to change without notice. 
Table 7-1. VX-44d/-55d Specifications (continued) 

Page 110

Specifications
98 Runco VX-44d/-55d Owner’s Operating Manual
PREL
IMINARY
7.2 
DHD Controller 
Specifications
Table 7-2 lists the DHD Controller specifications.  
Table 7-2. DHD Controller Specifications 
Aspect Ratios: 4:3, Letterbox, 16:9 Anamorphic, VirtualWide, Cinema, 
VirtualWide 2.35
Video Standards:NTSC, PAL
Inputs: (1) Composite; (2) S-Video; (1) Component;  
(2) HD-R (Pr), G (Y), B (Pb), H, V; (2) HDMI with HDCP
Outputs: HDMI with HDCP
Control Options:- Discrete infrared remote
- Serial...
Start reading Runco Vx 44d Projector User Manual

Related Manuals for Runco Vx 44d Projector User Manual

All Runco manuals