Runco Vx 40d Projector User Manual
Have a look at the manual Runco Vx 40d Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 123 Runco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
83Runco VX-40d/-50d/-60d/-80d Owner’s Operating ManualSection 5: Troubleshooting 5.2 LampSYMPTOMCAUSE/REMEDY Lamp does not ignite If the lamp won’t ignite, there may be an interlock failure such as an open lamp door, or failed lamp fan. An error code will display on the status LED display located on the built in keypad. If a temperature is too high (e.g.“DMD over critical temp limit”), the lamp will not ignite until the temperature is low enough. Cool the projector and try again. If the lamp does not ignite after a second and third try, replace the lamp. Lamp suddenly turns Off Try increasing the lamp power. The DMDs may be overheated. Replace the lamp. Flicker, Shadows or Dimness Increase lamp power, if possible.Replace the lamp. Intensity does not seem to workMake sure “Intensity” is selected in the Lamp menu. If the lamp power has increased to its maximum in order to maintain an intensity setting, intensity is automatically terminated. If the values shown in the Lamp menu indicate that the lamp power has reached this “over-drive” state, either reduce your intensity setting or install a new lamp.
84Runco VX-40d/-50d/-60d/-80d Owner’s Operating Manual Section 5: Troubleshooting This page is intentionally left blank.
85Runco VX-40d/-50d/-60d/-80d Owner’s Operating Manual Specifications SECTION 6 ➤ VX-40dProjector Type: Digital Light Processing™ (DLP™), 3-Chip, 16:9 Darkchip2™ DMD™ Native Resolution:1280 x 720 Aspect Ratios:Determined by supplied DHD Video Processor Video Standards: NTSC, PAL DTV Compatibility:480p, 720p, 1080i Scan Frequency: Horizontal: 15 – 120kHz Vertical: 23.97 – 150Hz Picture Size (16:9 screens) Recommended Width: 72 – 192 in. Maximum Width: 300 in. Throw Distance (Factor x Screen Width) Lens Option 1: Zoom 4.96 – 7.90 Lens Option 2: Zoom 1.65 – 1.95 Lens Option 3: Zoom 2.04 – 2.73 Lens Option 4: Zoom 2.86 – 4.83 Lens Option 5: Fixed 0.8 (for rear screen applications) Horizontal and Vertical Offset: Horizontal offset varies per lens up to 50%, Vertical offset varies per lens, up to 100%; Short Throw: H: 69%, V: 37% (Contact Runco technical support for installation details.) Lamp:1000W Xenon lamp module Lamp Life:1000 Hours @ 6,500K Inputs: (1) Composite, (1) S-Video, (1) DVI, (1) RGB/Component, (1) RS232, (1) RS422
86Runco VX-40d/-50d/-60d/-80d Owner’s Operating Manual Section 6: Specifications VX-40d (continued) ➤Brightness and Contrast: Cinema Standards Measurement System (CSMS) Specifica - tions - Brightness: 86 foot-Lamberts (fL) - Contrast Ratio: 232:1 to 285:1 (variable depending on lens aperture setting) These measurements are taken from the projector in a controlled, home theater environment. All measurements are made to ANSI/ NAPM IT7.228-1997 specifications using the Photo Research PR-650 SpectraColorimeter and Minolta LS-100 Luminance Meter, Video Essentials test DVD and a 1.3 gain, 72-inch wide screen. The projector is calibrated to a color temperature of 6,500K and has a minimum of 150 hours of usage. The foot-Lambert (fL) is the unit of measurement used in com - mercial movie theaters to express image brightness at the screen surface. The Society of Motion Picture and Television Engineers (SMPTE) specifies 16 fL as the target image brightness for film- based projectors using an open gate (without film in the projector). More importantly, today SMPTE specifies 12 fL as the target image brightness in Digital Cinema theaters. The foot-Lambert measure - ment is dependent on screen size, screen gain and projector light output. Home Theater Calibration Specifications - Light Output: 2180 ANSI Lumens - Contrast Ratio: 232:1 to 285:1 These specifications are obtained by calibrating the projector as described above for CSMS measurements. Industry-Standard Specifications - Light Output: 4000 ANSI Lumens - Contrast Ratio: 1500:1 to 1800:1 These are typical projector brightness and contrast specifications found in most companies’ sales literature. Runco includes these measurements in its literature to allow for direct comparison with other manufacturers’ projectors. These measurements are typi - cally taken at 9,000K to 13,000K to get expected performance data when the projector is used in professional, commercial and industrial displays. 12V Output: See Controller for Specifications Power Requirements: 100-240V AC, 50/60Hz, 1700W Operating Environments: 40 to 95ºF (5 to 35ºC); 20-80% humidity (non-condensing) Dimensions (w/o feet): Width: 29.03 in. (737 mm) Depth: 28.23 in. (717 mm) Height: 12.24 in. (311 mm) Weight (without lens): 85 lbs. (38.55 kg) Regulatory Approvals: Complies with FCC Class B, CE, C-Tick Limited Warranty: Projector: Two (2) years parts and labor from the date of delivery to the end user. Lamp Warranty: 1000 hours or six (6) months, whichever comes first.
87Runco VX-40d/-50d/-60d/-80d Owner’s Operating ManualSection 6: Specifications Projector Type: Digital Light Processing™ (DLP™), 3-Chip, 16:9 Darkchip2™ DMD™ Native Resolution:1280 x 720 Aspect Ratios:Determined by supplied DHD Video Processor Video Standards: NTSC, PAL DTV Compatibility:480p, 720p, 1080i Scan Frequency: Horizontal: 15 – 120kHz Vertical: 23.97 – 150Hz Picture Size (16:9 screens) Recommended Width: 72 – 240 in. Maximum Width: 350 in. Throw Distance (Factor x Screen Width) Lens Option 1: Zoom 4.96 – 7.90 Lens Option 2: Zoom 1.65 – 1.95 Lens Option 3: Zoom 2.04 – 2.73 Lens Option 4: Zoom 2.86 – 4.83 Lens Option 5: Fixed 0.8 (for rear screen applications) Horizontal and Vertical Offset: Horizontal offset varies per lens up to 50%, Vertical offset varies per lens, up to 100%; Short Throw: H: 69%, V: 37% (Contact Runco technical support for installation details.) Lamp:1.2kW Xenon lamp module Lamp Life:1000 Hours @ 6,500K Inputs: (1) Composite, (1) S-Video, (1) DVI, (1) RGB/Component, (1) RS232, (1) RS422 ➤ VX-50d
88Runco VX-40d/-50d/-60d/-80d Owner’s Operating Manual Section 6: Specifications VX-50d (continued) ➤Brightness and Contrast: Cinema Standards Measurement System (CSMS) Specifica - tions - Brightness: 107.3 foot-Lamberts (fL) - Contrast Ratio: 229:1 to 279:1 (variable depending on lens aperture setting) These measurements are taken from the projector in a controlled, home theater environment. All measurements are made to ANSI/ NAPM IT7.228-1997 specifications using the Photo Research PR-650 SpectraColorimeter and Minolta LS-100 Luminance Meter, Video Essentials test DVD and a 1.3 gain, 72-inch wide screen. The projector is calibrated to a color temperature of 6,500K and has a minimum of 150 hours of usage. The foot-Lambert (fL) is the unit of measurement used in com - mercial movie theaters to express image brightness at the screen surface. The Society of Motion Picture and Television Engineers (SMPTE) specifies 16 fL as the target image brightness for film- based projectors using an open gate (without film in the projector). More importantly, today SMPTE specifies 12 fL as the target image brightness in Digital Cinema theaters. The foot-Lambert measure - ment is dependent on screen size, screen gain and projector light output. Home Theater Calibration Specifications - Light Output: 3462 ANSI Lumens - Contrast Ratio: 229:1 to 279:1 These specifications are obtained by calibrating the projector as described above for CSMS measurements. Industry-Standard Specifications - Light Output: 6000 ANSI Lumens - Contrast Ratio: 1500:1 to 1800:1 These are typical projector brightness and contrast specifications found in most companies’ sales literature. Runco includes these measurements in its literature to allow for direct comparison with other manufacturers’ projectors. These measurements are typi - cally taken at 9,000K to 13,000K to get expected performance data when the projector is used in professional, commercial and industrial displays. 12V Output: See Controller for Specifications Power Requirements: 200-240V AC, 50/60Hz, 2100W Operating Environments: 40 to 95ºF (5 to 35ºC); 20-80% humidity (non-condensing) Dimensions (w/o feet): Width: 29.03 in. (737 mm) Depth: 28.23 in. (717 mm) Height: 12.24 in. (311 mm) Weight (without lens): 89 lbs. (40.37 kg) Regulatory Approvals: Complies with FCC Class B, CE, C-Tick Limited Warranty: Projector: Two (2) years parts and labor from the date of delivery to the end user. Lamp Warranty: 1000 hours or six (6) months, whichever comes first.
89Runco VX-40d/-50d/-60d/-80d Owner’s Operating ManualSection 6: Specifications Projector Type: Digital Light Processing™ (DLP™), 3-Chip, Darkchip2™ DMD™ Native Resolution:1400 x 1050 Aspect Ratios:Determined by Supplied DHD Video Processor Video Standards: NTSC, PAL DTV Compatibility:480p, 720p, 1080i Scan Frequency: Horizontal: 15 – 120kHz Vertical: 23.97 – 150Hz Picture Size (16:9 screens) Recommended Width: 72 – 192 in. Maximum Width: 300 in. Throw Distance (Factor x Screen Width) Lens Option 1: Zoom 4.48 – 7.15 Lens Option 2: Zoom 1.48 – 1.75 Lens Option 3: Zoom 1.81 – 2.40 Lens Option 4: Zoom 2.56 – 4.35 Lens Option 5: Fixed 0.75 (for rear screen applications) Horizontal and Vertical Offset: Horizontal offset varies per lens up to 50%, Vertical offset var- ies per lens, up to 100%; Short Throw: H: 69%, V: 37% (Contact Runco technical support for installation details.) Lamp:1000W Xenon lamp module Lamp Life:1000 Hours @ 6500K Inputs: (1) Composite, (1) S-Video, (1) DVI, (1) RGB/ Component, (1) RS232, (1) RS422 ➤ VX-60d
90Runco VX-40d/-50d/-60d/-80d Owner’s Operating Manual Section 6: Specifications VX-60d (continued) ➤Brightness and Contrast: Cinema Standards Measurement System (CSMS) Specifica - tions - Brightness: 94 foot-Lamberts (fL) - Contrast Ratio: 227:1 to 282:1 (variable depending on lens aperture setting) These measurements are taken from the projector in a controlled, home theater environment. All measurements are made to ANSI/ NAPM IT7.228-1997 specifications using the Photo Research PR-650 SpectraColorimeter and Minolta LS-100 Luminance Meter, Video Essentials test DVD and a 1.3 gain, 72-inch wide screen. The projector is calibrated to a color temperature of 6,500K and has a minimum of 150 hours of usage. The foot-Lambert (fL) is the unit of measurement used in commercial movie theaters to express image brightness at the screen surface. The Society of Motion Picture and Television Engineers (SMPTE) specifies 16 fL as the target image brightness for film-based projectors using an open gate (without film in the projector). More importantly, today SMPTE specifies 12 fL as the target image bright - ness in Digital Cinema theaters. The foot-Lambert measurement is dependent on screen size, screen gain and projector light output. Home Theater Calibration Specifications - Light Output: 2360 ANSI Lumens - Contrast Ratio: 227:1 to 282:1 These specifications are obtained by calibrating the projector as described above for CSMS measurements. Industry-Standard Specifications - Light Output: 4000 ANSI Lumens - Contrast Ratio: 1500:1 to 1800:1 These are typical projector brightness and contrast specifications found in most companies’ sales literature. Runco includes these measurements in its literature to allow for direct comparison with other manufacturers’ projectors. These measurements are typically taken at 9,000K to 13,000K to get expected performance data when the projector is used in professional, commercial and industrial displays. 12V Output: See Controller for Specifications Power Requirements: 100-240V AC, 50/60Hz, 1700W Operating Environments: 40 to 95ºF (5 to 35ºC); 20-80% humidity (non-condensing) Dimensions (w/o feet): Width: 29.03 in. (737 mm) Depth: 28.23 in. (717 mm) Height: 12.24 in. (311 mm) Weight (without lens): 85 lbs. (38.55 kg) Regulatory Approvals: Complies with FCC Class B, CE, C-Tick Limited Warranty: Projector: Two (2) years parts and labor from the date of delivery to the end user. Lamp Warranty: 1000 hours or six (6) months, whichever comes first.
91Runco VX-40d/-50d/-60d/-80d Owner’s Operating ManualSection 6: Specifications Projector Type: Digital Light Processing™ (DLP™), 3-Chip, Darkchip2™ DMD™ Native Resolution:1400 x 1050 Aspect Ratios:Determined by Supplied DHD Video Processor Video Standards: NTSC, PAL DTV Compatibility:480p, 720p, 1080i Scan Frequency: Horizontal: 15 – 120kHz Vertical: 23.97 – 150Hz Picture Size (16:9 screens) Recommended Width: 72 – 288 in. Maximum Width: 375 in. Throw Distance (Factor x Screen Width) Lens Option 1: Zoom 4.48 – 7.15 Lens Option 2: Zoom 1.48 – 1.75 Lens Option 3: Zoom 1.81 – 2.40 Lens Option 4: Zoom 2.56 – 4.35 Lens Option 5: Fixed 0.75 (for rear screen applications) Horizontal and Vertical Offset: Horizontal offset varies per lens up to 50%, Vertical offset varies per lens, up to 100%; Short Throw: H: 69%, V: 37% (Contact Runco technical support for installation details.) Lamp:1.2kW Xenon lamp module Lamp Life:1000 Hours @ 6500K Inputs: (1) Composite, (1) S-Video, (1) DVI, (1) RGB/ Component, (1) RS232, (1) RS422 ➤ VX-80d
92Runco VX-40d/-50d/-60d/-80d Owner’s Operating Manual Section 6: Specifications VX-80d (continued) ➤Brightness and Contrast: Cinema Standards Measurement System (CSMS) Specifica - tions - Brightness: 188.6 foot-Lamberts (fL) - Contrast Ratio: 225:1 to 277:1 (variable depending on lens aperture setting) These measurements are taken from the projector in a controlled, home theater environment. All measurements are made to ANSI/ NAPM IT7.228-1997 specifications using the Photo Research PR-650 SpectraColorimeter and Minolta LS-100 Luminance Meter, Video Essentials test DVD and a 1.3 gain, 72-inch wide screen. The projector is calibrated to a color temperature of 6,500K and has a minimum of 150 hours of usage. The foot-Lambert (fL) is the unit of measurement used in com - mercial movie theaters to express image brightness at the screen surface. The Society of Motion Picture and Television Engineers (SMPTE) specifies 16 fL as the target image brightness for film- based projectors using an open gate (without film in the projector). More importantly, today SMPTE specifies 12 fL as the target image brightness in Digital Cinema theaters. The foot-Lambert measure - ment is dependent on screen size, screen gain and projector light output. Home Theater Calibration Specifications - Light Output: 5740 ANSI Lumens - Contrast Ratio: 225:1 to 277:1 These specifications are obtained by calibrating the projector as described above for CSMS measurements. Industry-Standard Specifications - Light Output: 8000 ANSI Lumens - Contrast Ratio: 1500:1 to 1800:1 These are typical projector brightness and contrast specifications found in most companies’ sales literature. Runco includes these measurements in its literature to allow for direct comparison with other manufacturers’ projectors. These measurements are typi - cally taken at 9,000K to 13,000K to get expected performance data when the projector is used in professional, commercial and industrial displays. 12V Output: See Controller for Specifications Power Requirements: 200-240V AC, 50/60Hz, 2100W Operating Environments: 40 to 95ºF (5 to 35ºC); 20-80% humidity (non-condensing) Dimensions (w/o feet): Width: 29.03 in. (737 mm) Depth: 28.23 in. (717 mm) Height: 12.24 in. (311 mm) Weight (without lens): 89 lbs. (40.37 kg) Regulatory Approvals: Complies with FCC Class B, CE, C-Tick Limited Warranty: Projector: Two (2) years parts and labor from the date of delivery to the end user. Lamp Warranty: 1000 hours or six (6) months, whichever comes first.