Runco Vx 4000d Projector User Manual

Controls and Functions
Runco VX-4000d/VX-5000d Owner’s Operating Manual 9 
PREL
IMINARY
2.3 
DHD Controller Front 
Panel
Figure 2-4 shows the controls and indicators on the DHD Controller front panel; the 
paragraphs that follow describe them. 
Figure 2-4. DHD Controller Front Panel
1.RUNCO ICON 
Lights red to indicate that the DHD Controller is in standby mode; lights blue to 
indicate that the unit is on. 
2.POWER BUTTON 
Press once to toggle from standby mode to on mode. Press it again to return to...

Controls and Functions
10 Runco VX-4000d/VX-5000d Owner’s Operating Manual
PREL
IMINARY
8.DOWN BUTTON 
Used to direct select aspect ratios or move the menu cursor down in the On-Screen 
Display. When no menu is present on-screen, this button toggles you through the 
different aspect ratios, in this order: 
 
Virtualwide 2.35 - Cinema - VirtualWide - Letterbox - Standard (4:3) - Anamorphic
9.RIGHT BUTTON 
Used to direct select inputs or move the menu cursor right in the On-Screen Display. 
When no menus...

Controls and Functions
Runco VX-4000d/VX-5000d Owner’s Operating Manual 11 
PREL
IMINARY
2.4 
DHD Controller Rear 
Panel
Figure 2-5 shows the rear connector panel on the DHD Controller.
Figure 2-5. DHD Controller Rear Panel
Outputs1.ANALOG OUTPUTS (RGBHV) 
Connect these to the RGBHV inputs on the VX-4000d/VX-5000d. 
2.DVI OUT 
Connect this to the DVI-I Input on the VX-4000d/VX-5000d. 
Inputs3.DVI 1 / DVI 2 (Digital) 
Two, HDCP-compliant digital video inputs for connecting a DVD player or HD tuner 
with a...

Controls and Functions
12 Runco VX-4000d/VX-5000d Owner’s Operating Manual
PREL
IMINARY
6.COMPOSITE VIDEO INPUT 
Standard composite video input for connecting a VCR, laser disc player or other 
composite video source.
7.S-VIDEO 1 / S-VIDEO 2 
Two, standard S-Video inputs for connecting a DVD player, satellite receiver or Super 
VHS (S-VHS) VCR. 
8.12-VOLT (750 mA) TRIGGER OUTPUTS  
Connection for up to three (3), 12-volt trigger-controlled devices. These can be 
retractable screens, screen masks or the...

Controls and Functions
Runco VX-4000d/VX-5000d Owner’s Operating Manual 13 
PREL
IMINARY
2.5 
VX-4000d/VX-5000d 
Remote Control Units
The VX-4000d/VX-5000d ships with two remote control units:
 A standard Runco DHD Controller remote control unit; and
 A universal, touch-screen remote control unit that can be used with other home theater 
equipment. 
Only the touch-screen remote control can be used to perform zoom and focus 
adjustments. For this reason, you must use it to complete the initial...

Controls and Functions
14 Runco VX-4000d/VX-5000d Owner’s Operating Manual
PREL
IMINARY
1.IR OUTPUT INDICATOR 
Lights when a button is pressed to indicate that an IR signal is being transmitted.
2.ON / OFF 
Press to turn the projector on or off.
3.ENTER 
Press to select a highlighted menu item or confirm a changed setting.
4.Cursor Buttons (, , , )  
Use these buttons to select items or settings, adjust settings or switch display 
patterns.
 
 
When no menus are present on-screen, the UP and DOWN buttons...

Controls and Functions
Runco VX-4000d/VX-5000d Owner’s Operating Manual 15 
PREL
IMINARY
9.Aspect Ratio Selection Buttons 
Use the red buttons to select an aspect ratio directly or to enter numeric characters, 
as follows: 
 
 
ANA (Anamorphic) (3)  
For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.  
 
4X3 (Standard 4:3) (6)  
Scales the input signal to fit 4:3 display mode in the center of the screen.  
 
LETBOX (Letterbox) (9) 
For viewing LaserDisc movies or non-anamorphic DVDs on...

Controls and Functions
16 Runco VX-4000d/VX-5000d Owner’s Operating Manual
PREL
IMINARY
Touch-Screen RemoteThe touch-screen remote control unit furnished with the VX-4000d/VX-5000d provides 
basically the same functionality as the standard Runco DHD remote. In addition, it gives 
you access to the motorized lens controls (focus and zoom) and can be programmed to 
control other, non-Runco home theater components. (For detailed programming 
instructions, refer to the manual provided with the remote...

Controls and Functions
Runco VX-4000d/VX-5000d Owner’s Operating Manual 17 
PREL
IMINARY
4.POWER ON/OFF 
Use these buttons to turn the VX-4000d/VX-5000d on or off. 
5.ASPECT RATIO 
Press this button to go to the aspect ratio menu page (3/7).
6.SOURCE  
Press this button to go to the source selection menu page (2/7).
7.MENU 
Press this button to go to the DHD Controller OSD menu navigation page (4/7).
8.VIDEO  
Press this button to switch to the Composite Video input. 
9.COMP. 
Press this button to switch...

Controls and Functions
18 Runco VX-4000d/VX-5000d Owner’s Operating Manual
PREL
IMINARY
16.ENTER / Cursor Buttons (, , , )  
Use these buttons to select items or settings, adjust settings or switch display 
patterns.
 
 
When no menus are present on-screen, the UP and DOWN buttons toggle through 
the available aspect ratios, in this order: 
 
UP Button = Anamorphic - Standard (4:3) - Letterbox - VirtualWide - Cinema - 
Virtualwide 2.35
 
DOWN Button = Virtualwide 2.35 - Cinema - VirtualWide - Letterbox -...